Lower intake

avery370z · 09-20-2014, 02:56 PM

Below are the numbers before and after.

Megan370z · 09-20-2014, 05:13 PM

Thank you

so with stillen headers and your lower intake porting gained 20whp
there is quite a nice jump starting at 6800 to 7500rpm ( that's where the VVEL jump at his max)

there is a steady 2-6whp gain from 2600 to 6000rpm then start to open up 10whp gain at 6800. Then end up with a 20whp gain at peak.

Not bad, I wonder how much of gain is related to the porting.

Chuck33079 · 09-20-2014, 05:19 PM

Was the temperature similar for the before and after dynos?

avery370z · 09-20-2014, 10:50 PM

From just the extrude honing I don't know but I definitely felt the difference with my butt dyno. Next are the heads and I will post whether it makes power or not. Ptuning s dyno is in an environmental controlled room so the conditions are pretty much the same. I'm just exploring how much power this NA motor can make.

Eclipz · 09-20-2014, 11:22 PM

what do you plan on doing to the heads? Can you please list the other mods that you have? thanks and good luck with your plans

SlowZ · 09-21-2014, 10:48 AM

Hmmmm so I guess I was right in believing him this whole time!

avery370z · 09-21-2014, 01:44 PM

I'm disassembling my heads and going to Extrude Hone them and get a three angle valve job and slap them back on and see what happens. I would like to thank Jon @ Z1 motorsports and Patrick from Ptuning without there help I couldn't make this project work. I will create a sig that list all of my mods.

synolimit · 09-21-2014, 02:55 PM

Quote:

Originally Posted by avery370z

Extrude Hone in California. I sent them the gaskets and the intake and they did the rest. It cost me 600 dollars. I know that's expensive but it's another step done next is a stroker kit.

Damn. My lowers I sell ported sound good then at only $485 plus I do a core refund!

synolimit · 09-21-2014, 03:02 PM

Quote:

Originally Posted by Prototyper5

I'm curious to see what Just a ported lower intake manifold dynos, before and after...

~Reagan

I can do if people help me out. I have ported ones plus throttle bodies ready to start moving. I tried to dyno like the OP and it didn't work out because time was to great between dyno events. What I really need is a local to buy the parts and we all head to the dunk and do everything the same day.

synolimit · 09-21-2014, 03:12 PM

Quote:

Originally Posted by SlowZ

Hmmmm so I guess I was right in believing him this whole time!

Maybe, maybe not. How much recalibration done with the dyno months or weeks apart? Tuner mess with any settings within the computer of the dyno? I'd still like to see temps and such. Also what's the correction factor setting? These numbers could be the difference of SAE to STD or SAE to STP. Lotta lotta variables here. Like Megan said. ONLY!!!!! Way is same day, same dyno, no touching.

avery370z · 09-22-2014, 01:54 PM

Well guys all I can say is there's some room for this motor to make some more power. Everything is trial and error. But the end result is we are all trying to see some hp gains. Have fun doing it.

FPenvy · 09-22-2014, 02:04 PM

Quote:

Originally Posted by Megan370z

Thank you

so with stillen headers and your lower intake porting gained 20whp
there is quite a nice jump starting at 6800 to 7500rpm ( that's where the VVEL jump at his max)

there is a steady 2-6whp gain from 2600 to 6000rpm then start to open up 10whp gain at 6800. Then end up with a 20whp gain at peak.

Not bad, I wonder how much of gain is related to the porting.

send me one and i'll let you know

Megan370z · 09-22-2014, 05:36 PM

Quote:

Originally Posted by FPenvy

Quote:

Originally Posted by Megan370z

Thank you

so with stillen headers and your lower intake porting gained 20whp
there is quite a nice jump starting at 6800 to 7500rpm ( that's where the VVEL jump at his max)

there is a steady 2-6whp gain from 2600 to 6000rpm then start to open up 10whp gain at 6800. Then end up with a 20whp gain at peak.

Not bad, I wonder how much of gain is related to the porting.

Quote:

Originally Posted by FPenvy

send me one and i'll let you know

the problem is i don't know how much porting that company removed from the lower intake .. hehe

because I do have an extra one here and I did wanted to do something similar but its quite low in my priority list.

I never thought I would ditch the N/A world. It seem like the dark force was too much to resist !!!!

Megan370z · 09-22-2014, 05:37 PM

Quote:

Originally Posted by avery370z

Well guys all I can say is there's some room for this motor to make some more power. Everything is trial and error. But the end result is we are all trying to see some hp gains. Have fun doing it.

get proper headers and you will have even more.

Eclipz · 09-22-2014, 10:35 PM

Quote:

Originally Posted by Megan370z

the problem is i don't know how much porting that company removed from the lower intake .. hehe

because I do have an extra one here and I did wanted to do something similar but its quite low in my priority list.

I never thought I would ditch the N/A world. It seem like the dark force was too much to resist !!!!

Quote:

Originally Posted by Eclipz

Can you give the specs of how much you bored from your TBs and where you got them done. and how much you extruded from the manifold?

what CAI are you running with your bored TBs? what other mods do you have? sorry for all the questions, just want to get a better idea of what could contribute to your gains. if 340 is legit, then you should consider cams next.

i was wondering this as well

09-20-2014, 02:56 PM	#31 (permalink)
avery370z Base Member Join Date: Mar 2014 Location: Fort Worth,Texas Posts: 153 Drives: 2014 370z w/ Sp Pkg Rep Power: 11	Below are the numbers before and after. 2012z likes this.

09-20-2014, 05:13 PM	#32 (permalink)
Megan370z A True Z Fanatic Join Date: Oct 2009 Location: Canada Posts: 1,156 Drives: 370z Rep Power: 24	Thank you so with stillen headers and your lower intake porting gained 20whp there is quite a nice jump starting at 6800 to 7500rpm ( that's where the VVEL jump at his max) there is a steady 2-6whp gain from 2600 to 6000rpm then start to open up 10whp gain at 6800. Then end up with a 20whp gain at peak. Not bad, I wonder how much of gain is related to the porting. __________________ Megan Journal Click Me ....................One Man Team Motorsport Click Me

09-20-2014, 05:19 PM	#33 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29538	Was the temperature similar for the before and after dynos? __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

09-21-2014, 01:44 PM	#37 (permalink)
avery370z Base Member Join Date: Mar 2014 Location: Fort Worth,Texas Posts: 153 Drives: 2014 370z w/ Sp Pkg Rep Power: 11	I'm disassembling my heads and going to Extrude Hone them and get a three angle valve job and slap them back on and see what happens. I would like to thank Jon @ Z1 motorsports and Patrick from Ptuning without there help I couldn't make this project work. I will create a sig that list all of my mods. synolimit and Eclipz like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Port and Polish Lower Intake Questions	mike12002us	Intake/Exhaust	8	11-26-2014 12:59 PM
[FOR SALE] Stillen gen 3 lower intake tubes with k&n filters	kornflake7	Parts for sale (Private Classifieds)	1	03-29-2014 01:36 AM
350 lower than 370?	Dan Z Man	Nissan 370Z General Discussions	6	09-28-2010 07:54 PM
want to lower my Z	otftrble	Brakes & Suspension	6	07-19-2010 12:07 PM
Is it possible to go lower?	lifeztream	Nissan 370Z Pricing / Ordering Discussions	6	03-27-2010 02:00 AM

09-20-2014, 10:50 PM	#34 (permalink)
avery370z Base Member Join Date: Mar 2014 Location: Fort Worth,Texas Posts: 153 Drives: 2014 370z w/ Sp Pkg Rep Power: 11	From just the extrude honing I don't know but I definitely felt the difference with my butt dyno. Next are the heads and I will post whether it makes power or not. Ptuning s dyno is in an environmental controlled room so the conditions are pretty much the same. I'm just exploring how much power this NA motor can make.

09-20-2014, 11:22 PM	#35 (permalink)
Eclipz Enthusiast Member Join Date: Dec 2013 Location: Tampa Posts: 360 Drives: 06 Eclipse GS Rep Power: 11	what do you plan on doing to the heads? Can you please list the other mods that you have? thanks and good luck with your plans

09-21-2014, 10:48 AM	#36 (permalink)
SlowZ Premium Member Join Date: Jan 2014 Location: So cal Posts: 371 Drives: Z Rep Power: 11	Hmmmm so I guess I was right in believing him this whole time!

09-22-2014, 01:54 PM	#41 (permalink)
avery370z Base Member Join Date: Mar 2014 Location: Fort Worth,Texas Posts: 153 Drives: 2014 370z w/ Sp Pkg Rep Power: 11	Well guys all I can say is there's some room for this motor to make some more power. Everything is trial and error. But the end result is we are all trying to see some hp gains. Have fun doing it.