Tomei exhaust issues

abm89 · 07-23-2014, 09:24 AM

Weight savings and good build quality.... I give zero f***s

SlowZ · 07-23-2014, 12:46 PM

Anyone have any input on the wrap?

abm89 · 07-23-2014, 03:21 PM

Quote:

Originally Posted by SlowZ

Anyone have any input on the wrap?

I'm not using it. I personally don't think it matters.

SlowZ · 07-23-2014, 06:37 PM

I would be able to wrap the entire exhaust, test pipes back, with DEI wrap for $50 so that's why I was thinking of doing it. Just to keep it looking good and stuff and to prevent any scratches or dents that could occur while driving

Japanjay · 07-23-2014, 06:41 PM

I wouldn't, will hold water.

aszyd · 07-27-2014, 07:44 PM

I'm going to be swapping my Y over to the Motodyne XYZ pipe to see if I can quiet things down a little, and remove that rasp. I'm going to try the resonator first, then if that does not muffle the sound enough, the HFC.

The parking garage security guy at my office is starting to complain. Getting kicked out of the garage is not something I would like to have happen.

I was thinking about picking up the Amuse resonated Y, during the Bulletproof Auto sale, but damn, that thing will cost $1500.

Japanjay · 07-27-2014, 08:03 PM

You could get the XYZ and arts. There is a guy in my club with a 350z that has the Tomie, but is running the XYZ with standard cats and it is much tamer than tests with the tomie y and y back.

abm89 · 07-27-2014, 08:04 PM

I'm running resonated test pipes without the Tomei Y pipe and it's usable under 3k RPM

Japanjay · 07-27-2014, 08:09 PM

Oh, another note, I blew the 02 bung on the passenger side off running some bikes. Grabbed third and it sounded like a u-joint broke and the drive shaft started flopping in the tunnel. Freaked out and instantly pulled off the road on the shoulder. Looked under and the 02 was hanging and smacking the ground causing it flip up and hit the undercarriage. Will be calling Z1 tomorrow about getting a new one to me by Thursday, going in for tune on Friday. We think that since I was only a few miles from the house and the engine was up to temp, the defouler and sensor was still cold and when I super heated the test pipe the metal expanded really fast and popped the Bung weld.

aszyd · 07-27-2014, 08:23 PM

I have FI LTHs, so my only option, without going back to stock headers, is a resonated / catalyst Y pipe. I only need to kill the DBs a little. If I did go back to the stock headers, I would just reinstall the set of HFCs that I was running on my first aftermarket setup.

Eclipz · 07-27-2014, 09:46 PM

Everyone should post a video of their setups with the Tomei

we've already seen japanjay's curious to see how the rest of your setups compare.

abm89 · 07-27-2014, 09:48 PM

Quote:

Originally Posted by Eclipz

Everyone should post a video of their setups with the Tomei

we've already seen japanjay's curious to see how the rest of your setups compare.

I'll have something next weekend after my track day.

Though, videos don't accurately represent how many decibels are coming from the system.

mag_black · 07-27-2014, 11:34 PM

Fitment just doesn't look right. Although, they do look nice on the nismo bumpers.

Japanjay · 07-27-2014, 11:37 PM

Quote:

Originally Posted by abm89

I'll have something next weekend after my track day.

Though, videos don't accurately represent how many decibels are coming from the system.

You are so right, video doesn't provide the audio needed. Must hear in person.

SlowZ · 07-28-2014, 02:18 AM

I'll try to get a WOT flyby video 1st-5th soon.

07-23-2014, 09:24 AM	#46 (permalink)
abm89 A True Z Fanatic Join Date: Feb 2013 Location: Austin, Texas Posts: 1,386 Drives: 11 370Z \| 24 EL450 Rep Power: 64763	Weight savings and good build quality.... I give zero f***s __________________ Complete Parts List: https://github.com/abm89/ztouge-build

07-27-2014, 07:44 PM	#51 (permalink)
aszyd Track Member Join Date: May 2014 Location: Florida Posts: 877 Drives: Magma Red 370z T+S Rep Power: 21	I'm going to be swapping my Y over to the Motodyne XYZ pipe to see if I can quiet things down a little, and remove that rasp. I'm going to try the resonator first, then if that does not muffle the sound enough, the HFC. The parking garage security guy at my office is starting to complain. Getting kicked out of the garage is not something I would like to have happen. I was thinking about picking up the Amuse resonated Y, during the Bulletproof Auto sale, but damn, that thing will cost $1500. __________________ Competition Clutch\|Fast Intentions\|Maxbore\|NST\|Setrab\|Stillen\|Tomei\|Uprev\| Z1 Avant Garde\|SPC\|Stance\|Whiteline Aerojacket\|Seibon\|Tanabe\|TRS\|TWM

07-27-2014, 08:04 PM	#53 (permalink)
abm89 A True Z Fanatic Join Date: Feb 2013 Location: Austin, Texas Posts: 1,386 Drives: 11 370Z \| 24 EL450 Rep Power: 64763	I'm running resonated test pipes without the Tomei Y pipe and it's usable under 3k RPM __________________ Complete Parts List: https://github.com/abm89/ztouge-build

07-27-2014, 08:23 PM	#55 (permalink)
aszyd Track Member Join Date: May 2014 Location: Florida Posts: 877 Drives: Magma Red 370z T+S Rep Power: 21	I have FI LTHs, so my only option, without going back to stock headers, is a resonated / catalyst Y pipe. I only need to kill the DBs a little. If I did go back to the stock headers, I would just reinstall the set of HFCs that I was running on my first aftermarket setup. __________________ Competition Clutch\|Fast Intentions\|Maxbore\|NST\|Setrab\|Stillen\|Tomei\|Uprev\| Z1 Avant Garde\|SPC\|Stance\|Whiteline Aerojacket\|Seibon\|Tanabe\|TRS\|TWM Last edited by aszyd; 07-27-2014 at 08:35 PM.

07-27-2014, 09:46 PM	#56 (permalink)
Eclipz Enthusiast Member Join Date: Dec 2013 Location: Tampa Posts: 360 Drives: 06 Eclipse GS Rep Power: 11	Everyone should post a video of their setups with the Tomei we've already seen japanjay's curious to see how the rest of your setups compare. carlitos_370z likes this.

07-23-2014, 12:46 PM	#47 (permalink)
SlowZ Premium Member Join Date: Jan 2014 Location: So cal Posts: 371 Drives: Z Rep Power: 11	Anyone have any input on the wrap?

07-23-2014, 06:37 PM	#49 (permalink)
SlowZ Premium Member Join Date: Jan 2014 Location: So cal Posts: 371 Drives: Z Rep Power: 11	I would be able to wrap the entire exhaust, test pipes back, with DEI wrap for $50 so that's why I was thinking of doing it. Just to keep it looking good and stuff and to prevent any scratches or dents that could occur while driving

07-23-2014, 06:41 PM	#50 (permalink)
Japanjay Track Member Join Date: Mar 2012 Location: Puyallup Posts: 856 Drives: 09 Nissan 370z MB M6 Rep Power: 14	I wouldn't, will hold water.

07-27-2014, 08:03 PM	#52 (permalink)
Japanjay Track Member Join Date: Mar 2012 Location: Puyallup Posts: 856 Drives: 09 Nissan 370z MB M6 Rep Power: 14	You could get the XYZ and arts. There is a guy in my club with a 350z that has the Tomie, but is running the XYZ with standard cats and it is much tamer than tests with the tomie y and y back.

07-27-2014, 08:09 PM	#54 (permalink)
Japanjay Track Member Join Date: Mar 2012 Location: Puyallup Posts: 856 Drives: 09 Nissan 370z MB M6 Rep Power: 14	Oh, another note, I blew the 02 bung on the passenger side off running some bikes. Grabbed third and it sounded like a u-joint broke and the drive shaft started flopping in the tunnel. Freaked out and instantly pulled off the road on the shoulder. Looked under and the 02 was hanging and smacking the ground causing it flip up and hit the undercarriage. Will be calling Z1 tomorrow about getting a new one to me by Thursday, going in for tune on Friday. We think that since I was only a few miles from the house and the engine was up to temp, the defouler and sensor was still cold and when I super heated the test pipe the metal expanded really fast and popped the Bung weld.

07-27-2014, 11:34 PM	#58 (permalink)
mag_black A True Z Fanatic Join Date: Mar 2013 Location: Massachusetts Posts: 1,400 Drives: 09 370Z MT6 Rep Power: 666	Fitment just doesn't look right. Although, they do look nice on the nismo bumpers. __________________ fujimura ≠ abbeyRoadCompany ≠ fastIntentions ≠ motordyne ≠ avantGarde ≠ ecutek ≠ nismo ≠ stillen ≠ stoptech ≠ gtm ≠ spl ≠ carbonfiberelement ≠ stance™

07-28-2014, 02:18 AM	#60 (permalink)
SlowZ Premium Member Join Date: Jan 2014 Location: So cal Posts: 371 Drives: Z Rep Power: 11	I'll try to get a WOT flyby video 1st-5th soon.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Z1 Motorsports: Tomei Expreme Titanium Exhaust	John@Z1	Exhaust/Intake	170	08-07-2018 04:18 PM
Tomei Duracon	Astrosfan	Exterior & Interior	32	07-26-2016 03:31 PM
ERZ/CNT HFC & Invidia Exhaust - Issues?	EngrZ	Intake/Exhaust	13	07-03-2014 11:12 PM
Would you like to see Tomei make a titanium exhaust for the 370z?	vividracing	Intake/Exhaust	28	10-28-2013 01:46 AM
FI exhaust rust issues?	dmhenderson	Intake/Exhaust	5	09-17-2012 04:43 PM