New Soho Single exit for the 370z!!

Joepro · 02-21-2015, 10:56 AM

good read...assuming its correct.

How To Calculate Muffler Size and Exhaust Pipe Diameter - Exhaust Videos | Exhaust Videos

NoLaKrewe · 02-21-2015, 11:05 AM

Quote:

Originally Posted by Joepro

good read...assuming its correct.

How To Calculate Muffler Size and Exhaust Pipe Diameter - Exhaust Videos | Exhaust Videos

If you do the calculations on that website, then a 3' single exhaust is perfect for a bolt on Z. However, if I read everything right a 3' single exhaust would be a bottleneck for a turbo Z. Or am I missing something?

Joepro · 02-21-2015, 11:17 AM

Good read for turbos.
http:// http://www.cobbtuning.com/Technical-Articles-s/70676.htm

On the BP kits it's a 3" exhaust tube into the fi dual 2.5, which I am told from hear say doesn't start to loose gas(pardon the pun) till 600, whp.

abm89 · 02-21-2015, 03:00 PM

Just contacted soho motorsports looks like im going single.

370Z JT · 02-21-2015, 04:58 PM

why can't there be a design for a single exit exhaust that sits high like motordyne or FI and doesn't poke out as far out from the bumper?

abm89 · 02-21-2015, 05:13 PM

Quote:

Originally Posted by 370Z JT

why can't there be a design for a single exit exhaust that sits high like motordyne or FI and doesn't poke out as far out from the bumper?

I had an idea of using half of the FI 3inch system and custom welding it to mate a motordyne XYZ

Sent from my phone

abm89 · 02-21-2015, 05:17 PM

Quote:

Originally Posted by NoLaKrewe

Either way I'm so appreciative of this thread. I've been so stuck on duel for so long, this single..I've been needing it. I Found THIS Hot *** Picture

Amuse R1000 if you're curious.

Sent from my phone

Joepro · 02-21-2015, 05:19 PM

Someone go take off one of their fi cans or photoshop it....but it won't be drift style like all the subies...my biggest hangup would be like scott said the bumper cut out but that cannot be hard to fab something.

abm89 · 02-21-2015, 05:20 PM

Quote:

Originally Posted by Joepro

Someone go take off one of their fi cans or photoshop it....but it won't be drift style like all the subies...

It will look like the Nismo RC exhaust.

Sent from my phone

Gregor12 · 02-21-2015, 08:20 PM

What's up guys! Got the car dynoed today again. Had soho do a baseline and then another pull with the exhaust. Overall it looks like a 6%increas in torque and 5% in power. 4th and fifth gear! Car does have stock intakes and stock cats. The dyno read a little higher than I was expecting. But I'm still very happy with a gain of 11rwhp and 8lb/ft of torque!! Picked up 15 lb/ft of torque all the way from 3500 to 6000. It was nice to see the jump from the baseline!

Here were the numbers
Red is base line
Green is stock everything and soho cat back
Blue is stock everything and soho cat back with fuel adjustments (tune)

NoLaKrewe · 02-21-2015, 08:22 PM

Quote:

Originally Posted by Gregor12

What's up guys! Got the car dynoed today again. Had soho do a baseline and then another pull with the exhaust.

Here were the numbers
Red is base line
Overall it looks like a 6%increas in torque and 5% in power. 4th and fifth gear! Car does have stock intakes and stock cats. The dyno read a little higher than I was expecting. But I'm still very happy with a gain of 11rwhp and 8lb/ft of torque!!

Green is stock everything and soho cat back
Blue is stock everything and soho cat back with fuel adjustments (tune)

So the Dyno did read a little higher then normal right? However with just a Y back you gained 8 HP. What kind of HP pick up fo normal axel backs make?

Gregor12 · 02-21-2015, 08:29 PM

Quote:

Originally Posted by NoLaKrewe

So the Dyno did read a little higher then normal right? However with just a Y back you gained 8 HP. What kind of HP pick up fo normal axel backs make?

Yea it was. But still great power for a cat back exhaust! With just the axle back it picked up only 4 or 5 because the y oil was the choke point. Then with the y pipe it picked up another 8 on top of that with stock intakes and cats I don't think you'll see anymore gains. That's why it picked up so much under the curve but not up top. Some test pipes and intakes should help her open up the rest

NoLaKrewe · 02-21-2015, 08:33 PM

Quote:

Originally Posted by Gregor12

Yea it was. But still good gauns no matter what. I knew it wasn't going to be a 40-50whp gain with all the stock parts but still great power for a cat back

So with a Y Pipe, Soho 3' and some test pipes it should be around the same HP as other exhaust just 45+ pounds lighter. I think that's a good thing, because the stock Y is where most of the bottleneck comes from.

Gregor12 · 02-21-2015, 08:36 PM

Quote:

Originally Posted by NoLaKrewe

So with a Y Pipe, Soho 3' and some test pipes it should be around the same HP as other exhaust just 45+ pounds lighter. I think that's a good thing, because the stock Y is where most of the bottleneck comes from.

Hey man. Edited my comment up there^ lol. But really it should make more. I need to look. And see how much other people are gaining without test pipes. (Percentage not numbers)

Joepro · 02-21-2015, 08:57 PM

well now we know a little bit more, looks in line with the dyno graph on their website. as well, looks like a good single option if that is what you want. I would say the dyno reads about 20 HP high on average from other graphs I have seen, as well as all those 330+whp graphs they are pumping out, puts them right in the 315-320 range where they usually are tuned...anyway as long as you are happy with it that's all that matters, it is their y pipe right? I do not see it on the website.

most true cat-back exhausts from what I have seen make between 10-18 whp, Id say its about right.

02-21-2015, 10:56 AM	#166 (permalink)
Joepro A True Z Fanatic Join Date: Aug 2012 Location: Athens ohio Posts: 1,213 Drives: Company car Rep Power: 34	good read...assuming its correct. How To Calculate Muffler Size and Exhaust Pipe Diameter - Exhaust Videos \| Exhaust Videos __________________ Swift\|Koni\|SPC\| FI CBE\|Z1\|Stillen\|Sbend\|Zspeed\|R/T Tuned\|523 whp\|458 tq\|10.5 psi\|SOLD Joepro's Journal\|Joepro's Boosted Performance Build \|Pittsburgh-Western-Pa-Ohio-Wv-Group

02-21-2015, 11:17 AM	#168 (permalink)
Joepro A True Z Fanatic Join Date: Aug 2012 Location: Athens ohio Posts: 1,213 Drives: Company car Rep Power: 34	Good read for turbos. http:// http://www.cobbtuning.com/Technical-Articles-s/70676.htm On the BP kits it's a 3" exhaust tube into the fi dual 2.5, which I am told from hear say doesn't start to loose gas(pardon the pun) till 600, whp. __________________ Swift\|Koni\|SPC\| FI CBE\|Z1\|Stillen\|Sbend\|Zspeed\|R/T Tuned\|523 whp\|458 tq\|10.5 psi\|SOLD Joepro's Journal\|Joepro's Boosted Performance Build \|Pittsburgh-Western-Pa-Ohio-Wv-Group

02-21-2015, 03:00 PM	#169 (permalink)
David Parra Guest Posts: n/a	Just contacted soho motorsports looks like im going single. abm89 and Gregor12 like this.

02-21-2015, 04:58 PM	#170 (permalink)
370Z JT A True Z Fanatic Join Date: Jan 2010 Location: United States Posts: 2,905 Drives: 370Z PW 7AT Rep Power: 378	why can't there be a design for a single exit exhaust that sits high like motordyne or FI and doesn't poke out as far out from the bumper? __________________ Click for My Journal Top Secret \| EVO-R \| Fujimura Auto \| Shine Auto \| Seibon \| MRWorks \| Swift \| SPC \| SSR \| UpRev \| Project Kics \| NST \| Titek \| Eibach \| Nismo \| Whiteline \| Quaife \| Invidia \| Fly1 \| CF Element \| Carbon Signal

02-21-2015, 05:19 PM	#173 (permalink)
Joepro A True Z Fanatic Join Date: Aug 2012 Location: Athens ohio Posts: 1,213 Drives: Company car Rep Power: 34	Someone go take off one of their fi cans or photoshop it....but it won't be drift style like all the subies...my biggest hangup would be like scott said the bumper cut out but that cannot be hard to fab something. __________________ Swift\|Koni\|SPC\| FI CBE\|Z1\|Stillen\|Sbend\|Zspeed\|R/T Tuned\|523 whp\|458 tq\|10.5 psi\|SOLD Joepro's Journal\|Joepro's Boosted Performance Build \|Pittsburgh-Western-Pa-Ohio-Wv-Group

02-21-2015, 08:20 PM	#175 (permalink)
Gregor12 Enthusiast Member Join Date: Oct 2013 Location: CHARLOTTE, NC Posts: 433 Drives: 2012 370z 6mt sport Rep Power: 12	What's up guys! Got the car dynoed today again. Had soho do a baseline and then another pull with the exhaust. Overall it looks like a 6%increas in torque and 5% in power. 4th and fifth gear! Car does have stock intakes and stock cats. The dyno read a little higher than I was expecting. But I'm still very happy with a gain of 11rwhp and 8lb/ft of torque!! Picked up 15 lb/ft of torque all the way from 3500 to 6000. It was nice to see the jump from the baseline! Here were the numbers Red is base line Green is stock everything and soho cat back Blue is stock everything and soho cat back with fuel adjustments (tune) abm89 likes this. Last edited by Gregor12; 02-21-2015 at 08:22 PM.

02-21-2015, 08:57 PM	#180 (permalink)
Joepro A True Z Fanatic Join Date: Aug 2012 Location: Athens ohio Posts: 1,213 Drives: Company car Rep Power: 34	well now we know a little bit more, looks in line with the dyno graph on their website. as well, looks like a good single option if that is what you want. I would say the dyno reads about 20 HP high on average from other graphs I have seen, as well as all those 330+whp graphs they are pumping out, puts them right in the 315-320 range where they usually are tuned...anyway as long as you are happy with it that's all that matters, it is their y pipe right? I do not see it on the website. most true cat-back exhausts from what I have seen make between 10-18 whp, Id say its about right. __________________ Swift\|Koni\|SPC\| FI CBE\|Z1\|Stillen\|Sbend\|Zspeed\|R/T Tuned\|523 whp\|458 tq\|10.5 psi\|SOLD Joepro's Journal\|Joepro's Boosted Performance Build \|Pittsburgh-Western-Pa-Ohio-Wv-Group Last edited by Joepro; 02-21-2015 at 09:01 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
3inch single exit exhaust too big for N/A	blacknismoZ	Intake/Exhaust	63	01-27-2016 02:16 PM
New Custom Exhaust Single Exit 3.5''	Megan370z	Intake/Exhaust	28	09-30-2013 09:05 PM
370z Nismo Single exit	1SlowNizzy	Member's 370Z Gallery	30	08-22-2013 04:18 AM
AMUSE R1000 single exit exhaust review	VancouverZ34	Canada	33	03-02-2012 01:44 AM
Single Exit Exhaust	JDW1479	Intake/Exhaust	4	10-26-2010 01:22 AM