MOTORDYNE CBE with BERK HFC??

jamesj1996 · 07-08-2014, 02:18 PM

guys ive heard that the motordyne exhaust wouldnt fit properly with berk hfc...i dont see why it wouldnt. the motordyne shockwave is 2.5 in to 3in midpipes. alot of people also tell me it should fit but some say they dont can anyone confirm this.

shaun66 · 07-08-2014, 06:11 PM

Their normal exhaust(E370) bolts straight up to the stock cats. So it will bolt up to any VQ37hr specific cats,test pipe, etc. Im running their exhaust with stock cats currently and it should definitely fit with berk HFC.

jamesj1996 · 07-10-2014, 12:13 AM

ok thanks alot yeah i figured they should fit idk why people were saying it wouldnt

V1H · 03-18-2015, 07:13 AM

Hi, yes I've also got a Motordyne Shockwave ))) E370 mated to Berk HFCs, and it does fit. No Probs.
Only thing, the Berks are a few millimeters shorter than the stock cats, so you end up pulling the exhaust slightly toward it when you bolt it back onto the Berks. That's all there is.

Just a heads up, the Motordyne has a lovely sound with the stock cats, developing it's most racing pitch at 4000 rpm. When I then added the Berks the exhaust noise went noticably up, so it's proper race car sound now when u open the throttle

, especially around 4krpm. The idle and cruising noise at low throttle are still civilised for unoffensive city drive. It's somewhat comparable to when an M3 driver or Ferrari driver cruises and then suddenly stomps onto the throttle... I totally love it

Enjoy ur new power rocket

07-08-2014, 02:18 PM	#1 (permalink)
jamesj1996 Enthusiast Member Join Date: Apr 2014 Location: new jersey Posts: 291 Drives: 2009 370z cp sport Rep Power: 11	MOTORDYNE CBE with BERK HFC?? guys ive heard that the motordyne exhaust wouldnt fit properly with berk hfc...i dont see why it wouldnt. the motordyne shockwave is 2.5 in to 3in midpipes. alot of people also tell me it should fit but some say they dont can anyone confirm this.

07-10-2014, 12:13 AM	#3 (permalink)
jamesj1996 Enthusiast Member Join Date: Apr 2014 Location: new jersey Posts: 291 Drives: 2009 370z cp sport Rep Power: 11	thanks ok thanks alot yeah i figured they should fit idk why people were saying it wouldnt

03-18-2015, 07:13 AM	#4 (permalink)
V1H Base Member Join Date: Dec 2013 Location: United Kingdom Posts: 244 Drives: 2013 370Z-TT GT Edt Rep Power: 3367	Hi, yes I've also got a Motordyne Shockwave ))) E370 mated to Berk HFCs, and it does fit. No Probs. Only thing, the Berks are a few millimeters shorter than the stock cats, so you end up pulling the exhaust slightly toward it when you bolt it back onto the Berks. That's all there is. Just a heads up, the Motordyne has a lovely sound with the stock cats, developing it's most racing pitch at 4000 rpm. When I then added the Berks the exhaust noise went noticably up, so it's proper race car sound now when u open the throttle , especially around 4krpm. The idle and cruising noise at low throttle are still civilised for unoffensive city drive. It's somewhat comparable to when an M3 driver or Ferrari driver cruises and then suddenly stomps onto the throttle... I totally love it Enjoy ur new power rocket Last edited by V1H; 03-18-2015 at 07:22 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Any have a vid of the Berk Catback and Motordyne ART Pipes?	'10Anamoly	Intake/Exhaust	5	12-09-2012 04:04 AM
WTB: BERK Cat Back Exhaust AND BERK HFC	HATED1	Wanted	2	09-07-2010 05:28 PM
Berk hfc/berk cbe vs berk hfc/stillen exhaust	xbigb4ller69z	Intake/Exhaust	21	04-11-2010 04:35 AM
Berk HFC or Berk Test Pipes?	bobby8621	Intake/Exhaust	16	06-24-2009 06:48 PM
Redline Time Attack Results are in! DDM 370Z, BERK S2000 & BERK BMW 135i on track!	BerkTech	Track / Autocross / Drifting / Dragstrip	8	04-02-2009 12:37 PM

07-08-2014, 06:11 PM	#2 (permalink)
shaun66 Track Member Join Date: Mar 2010 Location: n Posts: 837 Drives: MB 370z 7AT Rep Power: 16	Their normal exhaust(E370) bolts straight up to the stock cats. So it will bolt up to any VQ37hr specific cats,test pipe, etc. Im running their exhaust with stock cats currently and it should definitely fit with berk HFC.