It seems as though the370z has NO thread for custom exhaust builds - If you have a custom exhaust or built a custom exhaust but added name brand components -
|
|
LinkBack | Thread Tools | Display Modes |
03-12-2014, 11:53 AM | #1 (permalink) |
A True Z Fanatic
|
Official Custom Exhaust Thread & Dyno #'s
It seems as though the370z has NO thread for custom exhaust builds -
If you have a custom exhaust or built a custom exhaust but added name brand components - please post pictures, info, and DYNO charts if you have any! For example, Stock Cats + 2.5" Piping + AAM Short Tails/Top Speed Axleback or Test Pipes + 2.5" Piping with 12" Resonators added + Custom Tips... There are plenty of exhausts out there for our cars, and not everyone has the $600-2500 for a quality exhaust laying around. I know going with a name brand is obviously the wiser choice the majority of the time, but I am sure there are some of us who have gotten great gains from a custom 2.5" straight pipe setup or crazy X Pipe configuration. Any of you guys build a decent setup? Anyone have any stats to prove it? Youtube videos for sound?
__________________
2009 Brilliant Silver BASE 7AT | TEIN S-Tech Springs | K&N Drop Ins & z1 Maf Tubes | AAM S-Line Short Tails | 5% Tint | 20MM Spacers | Sport Spoiler NickTurnon's 370z Build |
03-12-2014, 02:03 PM | #2 (permalink) |
A True Z Fanatic
Join Date: May 2013
Location: Columbus, OH
Posts: 5,051
Drives: 2013 Silver 370z
Rep Power: 3389 |
I'll be first.
Some "eBay" LTH garage line told me was a prototype made for them by someone , topspeed X pipe with the factory resonators custom installed as Helmholtz to kill the rasp the LTH produced, 18" vibrant inline resonators in the mid pipe installed, and straight piped back. The cheap way I did it was take a straight pipe and cut slits into the pipe which removed material, then I bent the pipe to touch where the slit was and welded it back together (no bender). I'll have to get more pics after I clean up the thick mig welds (not stainless wire and 0.035" thick) and get it all custom black ceramic coated. Hope your speakers are better than my ipad because its way deeper and better in person. Cold start http://www.youtube.com/watch?v=AoL-2lHP5NQ&sns=em Hot start and rev to 3k, 4k, 5k. http://www.youtube.com/watch?v=Gg8xjNUmuII&sns=em LTH, custom CBE, custom cai with Z1 post tubes, rpf1 wheels, no tune, LTH vs stock and cats. Coating by IPS.
__________________
13 370z- Last edited by synolimit; 03-13-2014 at 04:32 PM. |
03-12-2014, 02:08 PM | #3 (permalink) |
A True Z Fanatic
Join Date: Jul 2011
Location: Pittsburgh PA
Posts: 38,517
Drives: 15 GT-R BE/09 370Z
Rep Power: 1402085 |
my new set-up is being built starting next monday. once it's complete i'll update with info and pics. for now it's a secret lol
__________________
324whp/258wtq AAM Tuned |F.I. NonRes CF CBE/NonRes TestPipes #373|UpRev Tuner|Akuma Motorsports Intakes|Z1 34 Row Oil Cooler |
03-12-2014, 04:01 PM | #4 (permalink) |
A True Z Fanatic
|
SYNO - That exhaust is like Frankenstein. So ugly but I love it and I've never seen resonators added like that to our system. Almost thought they were ugly ART pipes for a second. Are you going to be able to trim down some of those welds? Also, did you have a number from your baseline dyno before adding exhaust?
Can't wait! Givin' up F.I for a custom route... or maybe keeping F.I and adding more!? *Bites Nails... We shall wait.
__________________
2009 Brilliant Silver BASE 7AT | TEIN S-Tech Springs | K&N Drop Ins & z1 Maf Tubes | AAM S-Line Short Tails | 5% Tint | 20MM Spacers | Sport Spoiler NickTurnon's 370z Build |
03-12-2014, 04:28 PM | #5 (permalink) | |
A True Z Fanatic
Join Date: May 2013
Location: Columbus, OH
Posts: 5,051
Drives: 2013 Silver 370z
Rep Power: 3389 |
Quote:
Yeah ill smooth them out and then ceramic coat it. Here's a smooth vs unsmooth on a piece of pipe. Also only before and after I have is LTH vs stock. Everything else was the same. Coating by IPS.
__________________
13 370z- Last edited by synolimit; 03-12-2014 at 04:38 PM. |
|
03-12-2014, 04:35 PM | #6 (permalink) | |
A True Z Fanatic
Join Date: Jul 2011
Location: Pittsburgh PA
Posts: 38,517
Drives: 15 GT-R BE/09 370Z
Rep Power: 1402085 |
Quote:
65 degrees yesterday and today we are supposed to get 1-3" of snow
__________________
324whp/258wtq AAM Tuned |F.I. NonRes CF CBE/NonRes TestPipes #373|UpRev Tuner|Akuma Motorsports Intakes|Z1 34 Row Oil Cooler |
|
03-13-2014, 12:28 AM | #7 (permalink) |
A True Z Fanatic
Join Date: Apr 2012
Location: San Diego CA
Posts: 1,103
Drives: Classified
Rep Power: 15 |
right now i have top speed axle backs with top speed test pipes with the stock nismo h and mid pipe
i was thinking about buying the megan racing drift spec midpipe(2.5in agency power replica) for $370(connects everything from the test pipes back to the axles) and having an exhaust shop weld in a pipe creating a h pipe so its like the OEM nismo pipe or the AAM sline midpipe
__________________
SOLD 370z New Car:classified DD:2011 Mini Cooper S stock |
03-13-2014, 04:24 PM | #8 (permalink) |
A True Z Fanatic
Join Date: May 2013
Location: Columbus, OH
Posts: 5,051
Drives: 2013 Silver 370z
Rep Power: 3389 |
Hope your speakers are better than my ipad because its way deeper and better in person.
Cold start http://www.youtube.com/watch?v=AoL-2lHP5NQ&sns=em Hot start and rev to 3k, 4k, 5k. http://www.youtube.com/watch?v=Gg8xjNUmuII&sns=em
__________________
13 370z- Last edited by synolimit; 03-13-2014 at 04:27 PM. |
03-13-2014, 04:33 PM | #9 (permalink) |
A True Z Fanatic
Join Date: Sep 2009
Location: Mod Capital of Canada
Age: 58
Posts: 7,354
Drives: cars. lots of cars.
Rep Power: 40182 |
Nothing radical about the CBE combo I have except for the custom tips. I'm running Berk HFC's into an HKS Hi-Power CBE to the Laser cut custom tips by Fringe XVO.
__________________
H&R / Stillen / Berk / HKS / Swift / Michelin / UpRev / SPC / Amuse Rep / Seibon / Fringe XVO / TWM / more... My Journal |
03-13-2014, 04:43 PM | #10 (permalink) |
A True Z Fanatic
Join Date: Sep 2013
Location: Lockhart, TX
Posts: 1,082
Drives: 13 Nissan 370Z A7
Rep Power: 18 |
I went straight dual to the stock muffler but getting resonators installed this weekend to take the bite out of it. It sounds good at idle but a bit fart cannish when you hit the throttle and loud.
I will take a video of it once everything is completed. Butt dyno feels there is a little more throttle response and there may be interest in the stealth mode of a true dual exhaust system. Pics and videos soon.
__________________
Takeda TR3009P Short Ram Intakes, Custom Dual Exhaust, X-Piped with 18" Resonators & TopSpeed Axle Backs. EVO-R Led Third Foglight, |
03-25-2014, 12:12 PM | #11 (permalink) |
Base Member
Join Date: Nov 2012
Location: Ontario
Posts: 5
Drives: 2008 g37s pearlwhite
Rep Power: 13 |
2.5" custom piping
since i spend more time here than my37 i thought i share my g37 custom 2.5" piping with x pipe and i have megan axle back muffler. had it done last year but haven't done any dyno. hopefully this summer along with diy port and polish intake manifold and runners.
|
03-25-2014, 12:17 PM | #12 (permalink) |
A True Z Fanatic
|
Wow ^ Thats VERY clean. I really like those branch resonators.
Would love to hear how this sounds! Upload vid?
__________________
2009 Brilliant Silver BASE 7AT | TEIN S-Tech Springs | K&N Drop Ins & z1 Maf Tubes | AAM S-Line Short Tails | 5% Tint | 20MM Spacers | Sport Spoiler NickTurnon's 370z Build |
03-25-2014, 01:20 PM | #13 (permalink) |
A True Z Fanatic
Join Date: Jul 2011
Location: Pittsburgh PA
Posts: 38,517
Drives: 15 GT-R BE/09 370Z
Rep Power: 1402085 |
so update on my exhaust:
went in laast week to get it all fabbed and installed but wrong flanges and regualr steel came in. had new stainless steel shipped in which we had ordered originally and correct flanges were also shipped. Z is currently on the rack so more updates and pics to come hopefully within the next day or two.
__________________
324whp/258wtq AAM Tuned |F.I. NonRes CF CBE/NonRes TestPipes #373|UpRev Tuner|Akuma Motorsports Intakes|Z1 34 Row Oil Cooler |
03-27-2014, 04:12 PM | #14 (permalink) |
A True Z Fanatic
Join Date: Jul 2011
Location: Pittsburgh PA
Posts: 38,517
Drives: 15 GT-R BE/09 370Z
Rep Power: 1402085 |
Official Custom Exhaust Thread & Dyno #'s
here you go boys.
Custom Short Tails for Fast Intentions Exhaust in case any of you didnt see this yet. thread made, pics added, video/sound to come after the weekend and i can try and get some good recordings....and good weather lol Teaser. Many more pics in my thread. Go check it out.
__________________
324whp/258wtq AAM Tuned |F.I. NonRes CF CBE/NonRes TestPipes #373|UpRev Tuner|Akuma Motorsports Intakes|Z1 34 Row Oil Cooler Last edited by FPenvy; 03-27-2014 at 04:18 PM. |
04-12-2014, 07:34 PM | #15 (permalink) |
A True Z Fanatic
Join Date: May 2013
Location: Columbus, OH
Posts: 5,051
Drives: 2013 Silver 370z
Rep Power: 3389 |
someone took a vid of my car. thought id post it up to show the sound while actually driving. im the 2nd white car. you can hear me pull out at 5 and 13 seconds and go WOT at 29 seconds going through 1st and 2nd gear. that driveway was probaly 80 feet long maybe and i pulled out into the second furthest lane and went for it. lol its pretty far away by the time im in second and you can still hear me pretty good from a phone facing the other direction haha.
OGC - YouTube
__________________
13 370z- |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[Official] "Which Exhaust Should I Buy for My 370z?" Thread | frost | Intake/Exhaust | 523 | 10-16-2022 10:38 AM |
Official UFC Thread | b1adesofcha0s | Sports | 985 | 08-11-2016 01:51 PM |
The official: oops i started a "Steering lock recall!!!" Thread; thread | AWSneer | Nissan 370Z General Discussions | 31 | 06-04-2013 11:23 PM |
▀▄ OFFICIAL ARK Performance Exhaust Picture/Video Thread! | TeamARK | Nissan 370Z Photos / Spyshots / Video / Media Gallery | 2 | 12-04-2012 06:43 PM |
Before / After Dyno - Weldina Exhaust, Custom 2.5" X-Pipe, Test Pipes | '10Anamoly | Intake/Exhaust | 19 | 03-01-2011 09:38 AM |