Fast Intentions CF Scratched :(

ka24king · 03-08-2014, 01:31 PM

My right can had a nice quarter size flat spot the low life is not so fun sometimes

mag_black · 03-08-2014, 07:05 PM

I'm on swifts and had CF cans for a year. I haven't scraped yet.

Z-Girl 12 · 03-08-2014, 11:42 PM

I scraped both mine a few months after installation almost made me cry. No speed bump, just not paying attention and drove through boulders of rocks over a driveway in the middle of repair. I heard every boulder tear through the canisters. About a nickel size exactly where your scrapes are. I quickly realized it was a sleeve and not an overlay. Pricing on just rear section is not bad at all. Yours is not nearly as bad as mine, my canisters are definitely straight through the cf...sound is louder too. Just don't plan on keeping the Z much longer so no replacement happening for me.

Be glad your damage is minimal!

genesis2012 · 03-09-2014, 01:02 AM

Quote:

Originally Posted by Z-Girl 12

I scraped both mine a few months after installation almost made me cry. No speed bump, just not paying attention and drove through boulders of rocks over a driveway in the middle of repair. I heard every boulder tear through the canisters. About a nickel size exactly where your scrapes are. I quickly realized it was a sleeve and not an overlay. Pricing on just rear section is not bad at all. Yours is not nearly as bad as mine, my canisters are definitely straight through the cf...sound is louder too. Just don't plan on keeping the Z much longer so no replacement happening for me.

Be glad your damage is minimal!

I hope you are upgrading to something nicer!

How much is a new canister or just to replace the CF?

genesis2012 · 03-09-2014, 01:15 AM

You can PM me

luigi90210 · 03-09-2014, 03:17 PM

And this is why I stay at stock height, sucks to see that OP

genesis2012 · 03-09-2014, 07:11 PM

Quote:

Originally Posted by luigi90210

And this is why I stay at stock height, sucks to see that OP

I wish I could stay at stock height haha. The wheel space was killing me!

luigi90210 · 03-09-2014, 09:57 PM

Quote:

Originally Posted by genesis2012

I wish I could stay at stock height haha. The wheel space was killing me!

do 20s with the same profile tire, it minimizes wheel gap from what i have seen

see i cant complain about wheel gap

Z-Girl 12 · 03-09-2014, 10:05 PM

I agree OP, the wheel gap is so fugly, bothered me everytime I walked toward my car. Just hated the profile, lowering created a totally different look. Still worth the low life in my opinion. I'd do it again, no speed bumps were a problem. Just a clear obstacle I didn't pattention to, smh. You gotta pay to play sometimes, I'm paying!

genesis2012 · 03-09-2014, 10:05 PM

^^^

Trying not to spend money on wheels

1st · 03-10-2014, 01:51 AM

War wounds every Z has a story to tell.

NLP370 · 03-10-2014, 02:31 PM

Hate to see this, but luckily no one can see it without crawling underneath

Riptide67 · 03-10-2014, 06:29 PM

at least you didnt do this, hahaha!

Both of my SS cans now have nice flat spots(fixed with a mallet). I never had an issue on Swifts, but dropping her farther on coils did the trick. Made the exhaust a bit deeper sounding...win...????? who knows

Jasonle · 03-10-2014, 06:44 PM

Dannnng! Lol

genesis2012 · 03-10-2014, 07:05 PM

Ouch lol. Atleast yours is SS, and that you can weld it together

03-08-2014, 01:31 PM	#16 (permalink)
ka24king Track Member Join Date: Feb 2013 Location: texas Posts: 582 Drives: '10 370z 40th annv. Rep Power: 13	My right can had a nice quarter size flat spot the low life is not so fun sometimes Gibby1113, genesis2012 and Riptide67 like this.

03-08-2014, 07:05 PM	#17 (permalink)
mag_black A True Z Fanatic Join Date: Mar 2013 Location: Massachusetts Posts: 1,400 Drives: 09 370Z MT6 Rep Power: 666	I'm on swifts and had CF cans for a year. I haven't scraped yet. Riptide67 likes this. __________________ fujimura ≠ abbeyRoadCompany ≠ fastIntentions ≠ motordyne ≠ avantGarde ≠ ecutek ≠ nismo ≠ stillen ≠ stoptech ≠ gtm ≠ spl ≠ carbonfiberelement ≠ stance™

03-08-2014, 11:42 PM	#18 (permalink)
Z-Girl 12 A True Z Fanatic Join Date: Apr 2012 Location: Florida Posts: 4,105 Drives: Spirited Rep Power: 11716	I scraped both mine a few months after installation almost made me cry. No speed bump, just not paying attention and drove through boulders of rocks over a driveway in the middle of repair. I heard every boulder tear through the canisters. About a nickel size exactly where your scrapes are. I quickly realized it was a sleeve and not an overlay. Pricing on just rear section is not bad at all. Yours is not nearly as bad as mine, my canisters are definitely straight through the cf...sound is louder too. Just don't plan on keeping the Z much longer so no replacement happening for me. Be glad your damage is minimal! genesis2012 likes this. __________________ 2012 Z-SOLD 2014 Nismo #565 Fast Intentions CBE/HFC/Swift/SPC/RJM/H&R-15/20mm/Z1 CAI/Headers/Intake Manifold w/Uprev Tune 328.31whp/263.64tq

03-09-2014, 01:15 AM	#20 (permalink)
genesis2012 Enthusiast Member Join Date: Mar 2013 Location: Orange County Posts: 275 Drives: BS Sport Rep Power: 12	You can PM me __________________ FI Non-Resonated \| Eibach Springs \| 20MM Spacers \| Blacked-Out Wing, Emblems & Diffuser \| Powder Coated Dark Gloss Grey Wheels \| GT-R Push Start

03-09-2014, 03:17 PM	#21 (permalink)
luigi90210 A True Z Fanatic Join Date: Apr 2012 Location: San Diego CA Posts: 1,103 Drives: Classified Rep Power: 15	And this is why I stay at stock height, sucks to see that OP Gibby1113 and genesis2012 like this. __________________ SOLD 370z New Car:classified DD:2011 Mini Cooper S stock

03-09-2014, 10:05 PM	#24 (permalink)
Z-Girl 12 A True Z Fanatic Join Date: Apr 2012 Location: Florida Posts: 4,105 Drives: Spirited Rep Power: 11716	I agree OP, the wheel gap is so fugly, bothered me everytime I walked toward my car. Just hated the profile, lowering created a totally different look. Still worth the low life in my opinion. I'd do it again, no speed bumps were a problem. Just a clear obstacle I didn't pattention to, smh. You gotta pay to play sometimes, I'm paying! OMGWTFBBQ and Riptide67 like this. __________________ 2012 Z-SOLD 2014 Nismo #565 Fast Intentions CBE/HFC/Swift/SPC/RJM/H&R-15/20mm/Z1 CAI/Headers/Intake Manifold w/Uprev Tune 328.31whp/263.64tq

03-09-2014, 10:05 PM	#25 (permalink)
genesis2012 Enthusiast Member Join Date: Mar 2013 Location: Orange County Posts: 275 Drives: BS Sport Rep Power: 12	^^^ Trying not to spend money on wheels __________________ FI Non-Resonated \| Eibach Springs \| 20MM Spacers \| Blacked-Out Wing, Emblems & Diffuser \| Powder Coated Dark Gloss Grey Wheels \| GT-R Push Start

03-10-2014, 01:51 AM	#26 (permalink)
1st A True Z Fanatic Join Date: Jul 2012 Location: I 80 Biz U.S. 50 Posts: 1,710 Drives: Platinum Z Rep Power: 1616	War wounds every Z has a story to tell. OMGWTFBBQ, Z-Girl 12, mfeinst and 2 others like this.

03-10-2014, 02:31 PM	#27 (permalink)
NLP370 Base Member Join Date: Mar 2014 Location: MN Posts: 27 Drives: '09 370z Nismo Rep Power: 11	Hate to see this, but luckily no one can see it without crawling underneath

03-10-2014, 06:29 PM	#28 (permalink)
Riptide67 A True Z Fanatic Join Date: Jul 2013 Location: Oak Harbor, WA Age: 37 Posts: 1,610 Drives: 09 Nismo #0483 PW Rep Power: 69	at least you didnt do this, hahaha! Both of my SS cans now have nice flat spots(fixed with a mallet). I never had an issue on Swifts, but dropping her farther on coils did the trick. Made the exhaust a bit deeper sounding...win...????? who knows Z-Girl 12 likes this. __________________ 2009 Nismo 370Z and 1975 Datsun 280Z 2+2 - PNW_INC - Legacy_Ohana Follow me on Instagam @s3zero_z3four

03-10-2014, 06:44 PM	#29 (permalink)
Jasonle A True Z Fanatic Join Date: Jan 2011 Location: St. Louis Posts: 3,509 Drives: 09 370z Rep Power: 25	Dannnng! Lol Riptide67 likes this. __________________ 2009 Nissan 370z/2003 Honda Soccer Van Shineauto Amuse Body Kit/UAM Fenders/Bc Br Coilovers/Topspeed Exhaust/Racing Hart Wheels and More My Sexy Beast

03-10-2014, 07:05 PM	#30 (permalink)
genesis2012 Enthusiast Member Join Date: Mar 2013 Location: Orange County Posts: 275 Drives: BS Sport Rep Power: 12	Ouch lol. Atleast yours is SS, and that you can weld it together Riptide67 likes this. __________________ FI Non-Resonated \| Eibach Springs \| 20MM Spacers \| Blacked-Out Wing, Emblems & Diffuser \| Powder Coated Dark Gloss Grey Wheels \| GT-R Push Start

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Scratched Fast Intentions Exhaust	Captainstevo	Intake/Exhaust	4	11-23-2012 08:25 PM
Fast Intentions CBE	SA370	Wanted	0	07-22-2012 01:11 PM
[FOR SALE] Fast Intentions HFC	Raizon	Parts for sale (Private Classifieds)	12	06-08-2012 01:35 AM
Fast Intentions Vs MXP	NastyZ	Intake/Exhaust	20	01-13-2012 07:50 PM