Custom ported and CNC throttle bodies, upper and lower manifolds by Synergy Composite

Rusty

Nice work. Can you get a before and after of the throttle bodies, upper and lower bolted together?

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

synolimit

Yep that's next, sent some to him just now.

__________________
13 370z-

jrb55gh

I know it would be a lot of extra work, but it might be important to know the flow of each port through the whole assembly including throttle bodies. The idea is to make each port in the assembly flow the same. Luckily this is not wet flow so that should allow more freedom to shape ports to achieve equal flow in all the ports.

synolimit

That can be arranged and should be done to make sure the performance in all cylinders is the same. The problem is to do that on each build would sky rocket the cost of porting as the porter will have to go back and forth multiple times.

__________________
13 370z-

jrb55gh

Agreed, flow bench matching in production would be cost prohibitive. Based on some experience I have had in the far past with v8 manifold porting there are probably some areas in every upper and lower manifold that need to be touched and some areas that should be left alone. Find those areas and verify with flow testing on one prototype pair of manifolds, then duplicate the pattern on production manifolds. The matching won't be perfect but chances are it will be better than stock.

NeverBoneStck

Ordered a M370 Mani and throttles. When they get here will install them on the car and head to the dyno for a retune. We shall see...

__________________
Juiced! That is all you need to know !!

ANMVQ

I guess I can follow you here also , LOL Keeps us posted , He's doing a stock mani port and polish for me and I'm testing it against my M370.

__________________
14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

ANMVQ

Just sent my stock manifold off to Scott, I took stock pics and will be comparing the ported Stock Vs the Stock manifold and also VS the M370

__________________
14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

Red_Z

So you send your m370 in for porting?

synolimit

Actually he paid me to buy one for him, we'll port it and send it to him and give him his money back when we get his back. This way his car will never be down.

__________________
13 370z-

Red_Z

Nice...i have a m370 already. ll be waiting for result

synolimit

I'm not sure if he's going to do a ported before after so just a fyi. The results might not mean anything as his dyno could read high or low. Yes I know we need to do this for people. I'll ask a buddy with my TB's and a m370 and see if he'll let me port it out.

__________________
13 370z-

NeverBoneStck

You are correct Scott. Just jumping on the dyno to see if the combo makes any power or torque compared to my old dyno runs .

__________________
Juiced! That is all you need to know !!

synolimit

I wanted to bring up an important issue that I was recently made aware of. Like the comment I made in this thread about how you need to insure and properly package your return items, I want to keep all communication open about anything that pops up and I need to make you all aware of.

Recently I sold a throttle body set to a customer in Australia. After installation the customer was throwing two CEL's. A P0123 and P0233. Both are throttle body TPS sensor codes. After the customer troubleshot a few things and did the throttle body reset procedure a few times, it was determined that the TPS sensor was bad on the passenger-side throttle body. All the customer did was remove the four screws holding the black TPS housing to the throttle body and swap his OEM TPS sensor that clearly had been working. I've been told by a few people now these electronic TPS sensors are very sensitive to vibration and bouncing around. With shipping these throttle bodies from customers to me, to the porter, back to a new customer it's possible these will go bad. If by chance you ever get one of my ported throttle bodies that is throwing check engine lights with these codes or possibly any other TPS sensor code, it is okay to remove the four screws on the TPS sensor housing and just swap the covers.

Below is a pic of what I'm talking about. As you can see it's about as easy as changing a light bulb. I say about as easy because the screws have an antitheft torque screw. In removing the cover below from a broken housing I got back, (posted before) all I used was a pair of needle nose pliers. The screws are not that tight nor difficult to remove.

Any questions please feel free to ask.





Fyi, here is the TB reset procedure.

How to reset your ECU and perform the Throttle Pedal Release and Idle Air Volume Learning procedures on an Infiniti G35 and the Nissan 350Z.

Before attempting any of the following procedures, it is advisable that you read through the instructions thoroughly and familiarize yourself with them.

A stop watch or an analog clock with a second’s needle will be useful.
**a quick reset can be accomplished by disconnecting the negative battery terminal, and depressing the brake a few times.

ECU Resetting Procedures

Timing is extremely critical. If it is NOT DONE within the specify time, the ECU will not reset and the Check Engine Light (CEL) will continue to remain ON.

Operations Procedures

1. Confirm that accelerator pedal is fully released, turn ignition switch “ON” and wait 3 seconds.
2. Repeat the following steps (2a and 2b) procedures quickly five times within 5 seconds.
2a. Fully depress the accelerator pedal (HARD).
2b. Fully release the accelerator pedal.
3. Wait 7 seconds, fully depress the accelerator pedal and keep it for approx. 10 seconds until the CEL starts blinking.
4. Fully release the accelerator pedal (while the CEL is still blinking)
5. Wait about 10 second.
6. Fully depress the accelerator pedal and keep it for more than 10 seconds.
7. Fully release the accelerator pedal (The CEL light will continue to blink).
8. Turn ignition switch to “OFF” position and now you can start the car. The CEL light should be gone.
If the CEL light continues to remain ON, repeat the above steps. Timing is EXTREMELY critical to resetting the ECU.

Accelerator Pedal Release Position Learning
Operation Procedure

1. Make sure that the accelerator pedal is fully released.
2. Turn ignition switch “ON” and wait at least 2 seconds.
3. Turn ignition switch “OFF” wait at least 10 seconds.
4. Turn ignition switch “ON” and wait at least 2 seconds.
5. Turn ignition switch “OFF” wait at least 10 seconds.

Throttle Valve Closed Position Learning
Operation Procedures

1. Make sure that accelerator pedal is fully released.
2. Turn ignition switch to “ON”.
3. Turn ignition switch to “OFF” wait at least 10 seconds.
Make sure that the throttle valve moves during above 10 seconds by confirming the operating sound.

Idle Air Volume Learning (Throttle Position Learning)

It is better to count the time accurately with a clock.

1. Perform “Accelerator Pedal Released Position Learning”.
2. Perform “Throttle Valve Closed Position Learning”.
3. Start engine and warm it up to normal operating temperature.
4. Turn ignition switch “OFF” and wait at least 10 seconds.
5. Confirm that the accelerator pedal is fully released, then turn ignition switch “ON” and wait 3 seconds.
6. Repeat the following (steps 7a, 7b) procedures quickly five times within 5 seconds.
7a. Fully depress the accelerator pedal (HARD)
7b. Fully release the accelerator pedal.
8. Wait 7 seconds, fully depress the accelerator pedal and keep it for approx. 20 seconds until the Check Engine Light (CEL) stops blinking and turned ON.
9. Fully release the accelerator pedal within 3 seconds after the CEL is ON.
10. Start engine and let it idle.
11. Wait 20 seconds.
12. Rev up the engine two or three times and make sure the idle speed and ignition timing are within the specifications.

__________________
13 370z-

ANMVQ

My intake manifold was delivered to Scott and Stewart signed for it

__________________
14 Q50 AWD, ARK, ECUTEK (SEB), Takda,