CJ Motorsports VHR Intake Manifold

FPenvy · 04-01-2015, 11:31 AM

Quote:

Originally Posted by bullitt5897

So you would want to cut a billet die for the unit and then use it to make your outer shells. From a manufacturing cost it shouldnt be that expensive but if there are errors it would be catastrophic...

no i'm just curious as to which route is cheaper. doing a billiet piece or getting a CF piece like the one pictured.

i have no idea as to how much either process is on the production side. just posing the question. either way i'm very excited to see what phunk turns out.

phunk · 04-01-2015, 11:33 AM

Quote:

Originally Posted by FPenvy

phunk i don't know much about the cost that goes into the cutting of a billet prototype with a CNC but i'm curious is a CF option could be cheaper? i don't know what that would run either but i saw the AMS GT-R ptroto CF mani and it got me thinking about it.

One of my best friends is on the deepest level of product R&D and manufacturing at AMS. They are actually right down the street from me.

They have been to the moon and back to get that intake manifold into production and are still sorting out loose ends. I have thought about asking them if they would be interested in selling me the CF plenums, but I already know the answer. That said, I know exactly where to get it made, but its not cheap... and the last thing it is, is QUICK

bullitt5897 · 04-01-2015, 11:36 AM

Billet would not be cheaper in materials but would be easier to reproduce consistently so there is a trade off... Higher material cost and machine time but lower labor.

Carbon fiber is lower material cost but higher labor...

The cost of the product will have to be determined as which is cheaper to produce and still be reliably reproduced and perform without failure. This is something Phunk will have to determine once he gets his prototypes built.

phunk · 04-01-2015, 11:38 AM

Making the billet plenums isnt really "expensive" for me since I can machine them in-house. But the machine that makes them is expensive and can be pumping out parts that would be worth more per hour of machine time. But thats OK, my machine isnt running 24/7 so until it is, I dont have to choose only the most profitable items to run through it.

Making a pattern/die/whatever-you-want-to-call-it for the CF wouldnt be a big deal, and if all other things work out, I have no reason to not at least get a quote on the CF plenums.

Thing is, for the GT-R its a lot easier to build a successful manifold, its a turbo engine. Everyone is going to gain big power for it, with minimal cost to low end that nobody really even cares about in a 1000+ hp car.

FPenvy · 04-01-2015, 11:39 AM

Quote:

Originally Posted by phunk

One of my best friends is on the deepest level of product R&D and manufacturing at AMS. They are actually right down the street from me.

They have been to the moon and back to get that intake manifold into production and are still sorting out loose ends. I have thought about asking them if they would be interested in selling me the CF plenums, but I already know the answer. That said, I know exactly where to get it made, but its not cheap... and the last thing it is, is QUICK

gotcha. thanks for the info. just saw that pic awhile back and always thought it was a nice looking piece.

yours better be at zdayz at least sir. i'm very excited to see what you come up with

worst case ship it to me and i'll take one there for you

phunk · 04-01-2015, 11:39 AM

Quote:

Originally Posted by bullitt5897

Billet would not be cheaper in materials but would be easier to reproduce consistently so there is a trade off... Higher material cost and machine time but lower labor.

Carbon fiber is lower material cost but higher labor...

The cost of the product will have to be determined as which is cheaper to produce and still be reliably reproduced and perform without failure. This is something Phunk will have to determine once he gets his prototypes built.

Reliability is the concern. Cracking or flanges busting off the plenum. If your lucky, the engine just screams to redline and bangs off the limiter rapid fire until you turn it off. Another scenario is a piece of it runs down into a cylinder and effectively destroys the engine.

Cosworth stopping making their CF plenums for their DE intake manifold....

Elmo370z · 04-01-2015, 10:16 PM

Holy Ship, i'm getting pumped.

Elmo370z · 04-01-2015, 11:42 PM

Wonder what the gains would be on a NA set with FI LTH's, FI CBE, Stillen G3's, and ported TB's along with a uprev tune. I know z1 kit minus the tb claims 340 ish to the wheels but lose a decent amount up-top.

bullitt5897 · 04-02-2015, 09:55 AM

Quote:

Originally Posted by Elmo370z

Wonder what the gains would be on a NA set with FI LTH's, FI CBE, Stillen G3's, and ported TB's along with a uprev tune. I know z1 kit minus the tb claims 340 ish to the wheels but lose a decent amount up-top.

We dont know yet. It will depend on a lot of factors in the design. After talking with Charles yesterday it seems like he has several versions of the design and is evaluating which one he wants to go with. Expect something that will be functional and sound in theory. As far as power is concerned depending on the design will depend on where one makes power. I have offered to help where I can since I have both an N/A Z and a Hi Horsepower Z...

I am giving my support as I know CJ-motorsports is a small company and the product has to be perfect from day one.

Hopefully, it will get in the CNC machine here shortly.

derraj06 · 04-05-2015, 11:37 PM

bullitt I talked to you at Z1 Friday. I didn't know you were following this project. Will you keep me in the loop on this? I'm staying NA for a reason but I'd love to find some extra power with this and I believe it's possible. Looking forward to seeing this in production.

bullitt5897 · 04-06-2015, 09:10 AM

sure no problem. but check back here often for the latest updates.

Unique_Z · 04-06-2015, 01:03 PM

I'm holding off my intake manifold purchase till this is released

ANMVQ · 04-06-2015, 01:32 PM

When this comes out if you want to do some comparison test, Vs the M370 and a ported G37/370Z upper intake with a ported lower let me know. test these as we speak.

Great work phunk !

Elmo370z · 04-06-2015, 03:27 PM

love all the support

Agent K · 04-06-2015, 04:18 PM

Quote:

Originally Posted by Iwan72

I'm holding off my intake manifold purchase till this is released

Same here. Waiting for this mani to drop before I get tuned. Fingers crossed for a good whp bump.

04-01-2015, 11:36 AM	#243 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	Billet would not be cheaper in materials but would be easier to reproduce consistently so there is a trade off... Higher material cost and machine time but lower labor. Carbon fiber is lower material cost but higher labor... The cost of the product will have to be determined as which is cheaper to produce and still be reliably reproduced and perform without failure. This is something Phunk will have to determine once he gets his prototypes built. __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

04-01-2015, 11:38 AM	#244 (permalink)
phunk A True Z Fanatic Join Date: Mar 2009 Location: Chicago Posts: 3,668 Drives: 370 Rep Power: 974723	Making the billet plenums isnt really "expensive" for me since I can machine them in-house. But the machine that makes them is expensive and can be pumping out parts that would be worth more per hour of machine time. But thats OK, my machine isnt running 24/7 so until it is, I dont have to choose only the most profitable items to run through it. Making a pattern/die/whatever-you-want-to-call-it for the CF wouldnt be a big deal, and if all other things work out, I have no reason to not at least get a quote on the CF plenums. Thing is, for the GT-R its a lot easier to build a successful manifold, its a turbo engine. Everyone is going to gain big power for it, with minimal cost to low end that nobody really even cares about in a 1000+ hp car. FPenvy and Rid3_FaM0uS like this. __________________ Charles @ CJ Motorsports : Website \| Facebook \| Instagram \| YouTube Home of the 9 second, stock longblock, stock drivetrain 6MT 370z. 9.91 @ 142mph

04-05-2015, 11:37 PM	#250 (permalink)
derraj06 Enthusiast Member Join Date: Jun 2013 Location: Huntsville, AL Posts: 406 Drives: MB 370z Rep Power: 12	bullitt I talked to you at Z1 Friday. I didn't know you were following this project. Will you keep me in the loop on this? I'm staying NA for a reason but I'd love to find some extra power with this and I believe it's possible. Looking forward to seeing this in production. bullitt5897 likes this.

04-06-2015, 09:10 AM	#251 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	sure no problem. but check back here often for the latest updates. __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

04-06-2015, 01:03 PM	#252 (permalink)
Unique_Z A True Z Fanatic Join Date: Dec 2010 Location: Brunei Posts: 1,515 Drives: 370Z, 180SX Rep Power: 17	I'm holding off my intake manifold purchase till this is released __________________ My Z Build UniqueZ

04-01-2015, 10:16 PM	#247 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,709 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	Holy Ship, i'm getting pumped.

04-01-2015, 11:42 PM	#248 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,709 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	Wonder what the gains would be on a NA set with FI LTH's, FI CBE, Stillen G3's, and ported TB's along with a uprev tune. I know z1 kit minus the tb claims 340 ish to the wheels but lose a decent amount up-top.

04-06-2015, 01:32 PM	#253 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 19	When this comes out if you want to do some comparison test, Vs the M370 and a ported G37/370Z upper intake with a ported lower let me know. test these as we speak. Great work phunk ! Elmo370z likes this. __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

04-06-2015, 03:27 PM	#254 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,709 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	love all the support

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Intake manifold project	Dwnshift	Intake/Exhaust	119	05-17-2015 03:37 AM
Z1 Motorsports: Metal HR/VHR Manifold 3 Bolt Gasket	John@Z1	Exhaust/Intake	27	09-09-2013 07:40 PM
ID this intake manifold	Japanjay	Intake/Exhaust	5	07-27-2013 08:31 PM
[FOR SALE] OEM intake manifold	seymore4	Parts for sale (Private Classifieds)	5	02-24-2012 07:17 PM
gtr intake Manifold on 370z !!	indyn	Intake/Exhaust	5	06-01-2011 10:06 AM