Nissan 370Z Forum
Page 2 of 6 1 2 34 Last »
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Intake/Exhaust (http://www.the370z.com/intake-exhaust/)
-   -   09 Nismo Z exhaust project (http://www.the370z.com/intake-exhaust/83885-09-nismo-z-exhaust-project.html)

luigi90210 12-25-2013 02:57 AM
Quote:
Originally Posted by Fulljim (Post 2624055)
No No No !!

I get rid of the Nismo exhaust to fabricate a new one, from scratch.
So I'll be selling the one that's on my Nismo for dirt cheap.

:driving:
lmfao ah kk

just to let you know, the nismo s tune and the nismo exhaust are 2 completely different exhausts

also you can get about $500 for your nismo exhaust, that should cover the cost for a exhaust shop to fabricate something up for ya

Fulljim 12-25-2013 07:56 AM
In fact, me and my friend will fabricate it. He has a nice shop so I will
do it with him.
I will probably sell it for like 150$ and the person will pay the shipping since i'm located in Canada.

Can't wait to do that !!! And hear it !

Fulljim 12-27-2013 12:24 AM
What do you guys think of the 18 in Vibrant resonator over the flowmaster ?


And where is the cheapest place to buy an HKS muffler ?

:ugh2:

Fulljim 02-09-2014 05:36 PM
Partzzz !
 
So most of the parts are in!

HKS muffler, Resonators and Berk HFC !

Its all gonna be in 3in polished 409 stainless.

I begin tonight by polishing those HFC... Why ?

Why not ??? :tup:

Can't wait to build !

megalapagas 02-09-2014 08:14 PM
Quote:
Originally Posted by Fulljim (Post 2685939)
So most of the parts are in!

HKS muffler, Resonators and Berk HFC !

Its all gonna be in 3in polished 409 stainless.

I begin tonight by polishing those HFC... Why ?

Why not ??? :tup:

Can't wait to build !
In for results man, sounds like a great project....

Fulljim 02-10-2014 10:43 PM
Polishing
 
1 Attachment(s)
Just finished polishing my first HFC... Took me 1:30h, but i'm happy with the result !

Attachment 83732

luigi90210 02-11-2014 03:52 AM
Quote:
Originally Posted by Fulljim (Post 2687682)
Just finished polishing my first HFC... Took me 1:30h, but i'm happy with the result !

Attachment 83732
looks amazing bro

Fulljim 02-13-2014 01:52 AM
Polishing continues ...
 
1 Attachment(s)
Here I go again! HFC's done polishing... I received my Y pipe and cone
today with Vbands.

Here are the polished on the left, that I just did ! :tup:

Attachment 83816

The only thing I wait now, is the winter to end to bring the car at the shop ! :driving:

megalapagas 02-13-2014 10:24 AM
Quote:
Originally Posted by Fulljim (Post 2691395)
Here I go again! HFC's done polishing... I received my Y pipe and cone
today with Vbands.

Here are the polished on the left, that I just did ! :tup:

Attachment 83816

The only thing I wait now, is the winter to end to bring the car at the shop ! :driving:
Want some Texas Heat? :tup: hahaha

Fulljim 02-13-2014 01:05 PM
Yes bring it to Canada plz ! :tup:

jwick 02-13-2014 01:34 PM
Quote:
Originally Posted by megalapagas (Post 2691653)
Want some Texas Heat? :tup: hahaha
No kidding...32deg when I woke up and it'll be mid-high 70's tomorrow. Gotta luv Texas

zguynate 02-13-2014 01:47 PM
I plan on doing a single exhaust with the BP kit. I think 3 inch will do just fine for stock block power. Im looking forward to seeing the results of this!

Fulljim 02-13-2014 07:26 PM
Stay tuned for more !

:ughdance:

Chuck33079 02-13-2014 08:00 PM
Are you too far in to change to a 3.5" pipe? Going from two 2.5" pipes to a single 3" is a substantial reduction in flow. You're going to choke the car. Take a look at the first post below. The author's included a chart with all of the math.

Exhaust Tube Sizing: I did your Arithmetic for you!! - Exhaust - HybridZ

Megan370z 02-13-2014 08:23 PM
Quote:
Originally Posted by Chuck33079 (Post 2692395)
Are you too far in to change to a 3.5" pipe? Going from two 2.5" pipes to a single 3" is a substantial reduction in flow. You're going to choke the car. Take a look at the first post below. The author's included a chart with all of the math.

Exhaust Tube Sizing: I did your Arithmetic for you!! - Exhaust - HybridZ
hehe.. this is why some people who need an optimized single exhaust should strongly buy my complete setup. :)

unless that somebody is of course doing a personal project :)


All times are GMT -5. The time now is 05:43 PM.
Page 2 of 6 1 2 34 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2