Injen Intakes Installed! Pics, Vids, Dyno

THMotorsports · 12-02-2009, 05:33 PM

Thank you for the kind words! Glad everything got to you quickly, stay safe!

m4a1mustang · 12-02-2009, 06:35 PM

Quote:

Originally Posted by jmlenz

Do these intakes sit right behind the removable plastic fang panels? For someone living in socal (little to no rain) it would would nice to have direct air flow to the filters if the placement is right.

No. They are off to the side of the plastic fang panels.

See the attached pics. They are blocked from the grille area by a panel.

If you wanted direct airflow, you could open the panels and run a very short tube from the fang vent and into a hole you cut in the panel. I wouldn't direct the airflow directly at the filter because I'd still be worried about spraying water directly on the filter.

THMotorsports · 12-10-2009, 11:29 AM

PM's replied! Thanks for the continued orders!

THMotorsports · 12-16-2009, 02:13 PM

ZForce · 01-03-2010, 01:37 PM

Nice write up OP. Mine have been sitting in the box at the shop since Aug. Waiting on other R&D products from shop before install. Saw the black chrome on a G37 and trying to get a swap from chrome to black. I am still considering modshacks addtional air flow mod but you make some very valid points and will prolly hold off for the time being. Thanks again.

Curtis

spearfish25 · 01-18-2010, 11:35 AM

Where do these things draw their aiflow from? The one time I've pulled my front fascia, those 'pockets' on either side where the filters sit seem to be completely enclosed. My sense is the airflow in there is pretty poor and sealed off. Am I wrong? Maybe the gains would really improve with a little ducting into those compartments.

ZForce · 01-18-2010, 01:41 PM

Re-reading through the 10 pages I found Q & A's on whether there would be a benefit on routing a hose from the fang area to the filter. And where does the air come from if the compartment of the air filter (Injen CAI filter placement) is completely sealed from outside environment.

I wanted to hilight some of the points of interest to save future readers from having to read all 10 pages.

Hope this helps!
It did for me!

Cheers
Curtis

Quote:

Originally Posted by Brazilbro

I like the placement better then the stillen. It looks like it would be easyer to route that Modshack fang vent tube to it. Also doesnt set in front of a hot radiator. Whats price on this?

Quote:

Originally Posted by m4a1mustang

You would probably have to cut a hole in the plastic plate next to the filter but it'd be pretty easy. I don't know how that would work out for rain driving, though. I think the filter has easy access to cool air where it is right now, so I'm not sure if there would be any material benefit to routing the fang vents.
As far as pricing... PM the vendors. They can't publicly post the special pricing due to agreements with the manufacturers.

BTW, my apologies for the dirty pipes. I will clean them up tomorrow and get a pic of them clean and shiny.

I'm really glad I opted for polished over powdercoated black.

Quote:

Originally Posted by FuszNissan

I love Injen, I had them on my 350. Great product. My only concern is people talking about cutting those corner plates. If you do that you will expose the filters to direct elements. I wouldn't advise doing so. BTW..nice write up. I wish I had these on vs. my stillen.

Quote:

Originally Posted by spearfish25

My concern is that those side 'pockets' where the Ingens sit don't have as much airflow access as the Stillen kit gets right in front of the radiator.

I took the front fascia off to replace the horns and those lateral areas seem very isolated from good airflow. This just puts the intake filters in their own isolated little pockets once the fascia is back on. I'd be surprised if the gains for the Ingen come anywhere close to the Stillen GenIII.

Quote:

Originally Posted by m4a1mustang

They seem that way, but it's not like they are sealed off or anything. A fair amount of air that enters through the front grille makes it's way to those pockets.

If it's really a concern, you could always remove the "dividers" and completely open that area up, but then I'd worry about getting the filters wet in rain driving. Your best bet would probably be to cut holes in the dividers and use Steve's (Modshack) technique to divert some more air into that area.

ZForce · 01-18-2010, 01:46 PM

And if anyone is interested in the Modshack mod for the Injen CAI, here is the answer from Modshack and the link.

http://www.the370z.com/diy-section-d...tml#post187695

Quote:

Originally Posted by ZForce

Looking to have the vents done soon. I am wondering how much cooler air will get through on a Injen CAI versus the Stillen G3 CAI being they are mounted in different areas.

Quote:

Originally Posted by Modshack

You just need to aim the hoses or ducting at your filter. A left and right 90 degree angle off the fang holes, pointed toward you injen should work..

spearfish25 · 01-18-2010, 02:37 PM

+1 Rep for doing my dirty work, ZForce. I'll have to look inside the fascia again but it sounds like air just flows in from the inboard sides of each of those 'pockets'. If I remember correctly, there wasn't much grime in those pockets when I pulled the fascia. I'd be reluctant to divert the fang vents that way and suddenly be blasting road grime all over those areas.

m4a1mustang · 01-18-2010, 10:10 PM

Quote:

Originally Posted by ZForce

Re-reading through the 10 pages I found Q & A's on whether there would be a benefit on routing a hose from the fang area to the filter. And where does the air come from if the compartment of the air filter (Injen CAI filter placement) is completely sealed from outside environment.

I wanted to hilight some of the points of interest to save future readers from having to read all 10 pages.

Hope this helps!
It did for me!

Cheers
Curtis

+1 rep!

Slynky · 03-19-2010, 07:43 AM

Quote:

Originally Posted by m4a1mustang

I dunno, I think black anything would get lost in the engine bay. The polished tubes really stand out and look great.

Damn shame (as we both have red Zs) you can't get in the same color as I got for my RSX--RED. That would have looked great in the bay !

I agree, silver is the next best choice.

+1 for the informative post !

Slynky · 03-19-2010, 08:19 AM

Quote:

Originally Posted by m4a1mustang

I can't wait, either. The only thing I'm not looking forward to is maybe not being able to hear the engine as much. Really, regardless of the gains, I think the sound alone makes this kit worth the price. It absolutely changes everything... the thing sounds amazing.

I can't imagine what it sounds like to others as I accelerate past them... It sounds pretty wicked inside the car, especially with the windows down.

Yeah, no doubt that sound is sexy. I couldn't believe how loud it was on my RSX! Since I'm an old fart, I can easily relate to my days as a teen and being under the hood with a nice 800 CFM Holley with the air filter off listening to the butterfly open and close.

As to your comment on others hearing the sound, I remember seeing people who were busy doing things in their yard stop and look when they heard the sound of me kicking it in 1st or 2nd. Even had one guy call the cops on me for speeding (when I wasn't...the sound just SOUNDED like I was speeding) in our subdivision.

370Zsteve · 03-19-2010, 08:40 AM

Am I missing something or did this 'm4a1' fella not post his second dyno chart?

m4a1mustang · 03-19-2010, 09:10 AM

Steve, the shop never followed through to email me the graph. I was less than impressed with their operation so I am not trying to go back and see if I can get it from them. If you want, I can draw you a graph this weekend, but honestly it looks exactly like all of the G3 and Injen charts out there. Minimal gains until 7k, where the stock airboxes fall off.

bejan · 03-19-2010, 11:25 AM

Rep power added! Thanks m4a1!

12-02-2009, 05:33 PM	#136 (permalink)
THMotorsports The370Z.com Sponsor Join Date: Dec 2008 Location: Chicago, IL Posts: 20,294 Drives: G37s Coupe Rep Power: 56	Thank you for the kind words! Glad everything got to you quickly, stay safe! __________________ We Now Offer BILL-ME-LATER ---Largest N/A Fortune Auto Distributor------STANCE Midwest/East Coast Distributor--- ---Suspension Guru's---

12-10-2009, 11:29 AM	#138 (permalink)
THMotorsports The370Z.com Sponsor Join Date: Dec 2008 Location: Chicago, IL Posts: 20,294 Drives: G37s Coupe Rep Power: 56	PM's replied! Thanks for the continued orders! __________________ We Now Offer BILL-ME-LATER ---Largest N/A Fortune Auto Distributor------STANCE Midwest/East Coast Distributor--- ---Suspension Guru's---

12-16-2009, 02:13 PM	#139 (permalink)
THMotorsports The370Z.com Sponsor Join Date: Dec 2008 Location: Chicago, IL Posts: 20,294 Drives: G37s Coupe Rep Power: 56	__________________ We Now Offer BILL-ME-LATER ---Largest N/A Fortune Auto Distributor------STANCE Midwest/East Coast Distributor--- ---Suspension Guru's---

01-18-2010, 11:35 AM	#141 (permalink)
spearfish25 A True Z Fanatic Join Date: Mar 2009 Location: Naples, FL Posts: 4,117 Drives: to work Rep Power: 1856	Where do these things draw their aiflow from? The one time I've pulled my front fascia, those 'pockets' on either side where the filters sit seem to be completely enclosed. My sense is the airflow in there is pretty poor and sealed off. Am I wrong? Maybe the gains would really improve with a little ducting into those compartments. __________________ 2013 Cadillac V-Wagon, RIP Z

01-18-2010, 02:37 PM	#144 (permalink)
spearfish25 A True Z Fanatic Join Date: Mar 2009 Location: Naples, FL Posts: 4,117 Drives: to work Rep Power: 1856	+1 Rep for doing my dirty work, ZForce. I'll have to look inside the fascia again but it sounds like air just flows in from the inboard sides of each of those 'pockets'. If I remember correctly, there wasn't much grime in those pockets when I pulled the fascia. I'd be reluctant to divert the fang vents that way and suddenly be blasting road grime all over those areas. __________________ 2013 Cadillac V-Wagon, RIP Z

01-03-2010, 01:37 PM	#140 (permalink)
ZForce A True Z Fanatic Join Date: Jul 2009 Location: Roseville, CA Posts: 2,359 Drives: 09 370Z Tour + Sport Rep Power: 21	Nice write up OP. Mine have been sitting in the box at the shop since Aug. Waiting on other R&D products from shop before install. Saw the black chrome on a G37 and trying to get a swap from chrome to black. I am still considering modshacks addtional air flow mod but you make some very valid points and will prolly hold off for the time being. Thanks again. Curtis

03-19-2010, 08:40 AM	#148 (permalink)
370Zsteve A True Z Fanatic Join Date: Sep 2009 Location: Gold Coast CT Posts: 10,599 Drives: 2019 Corvette G.S. Rep Power: 43	Am I missing something or did this 'm4a1' fella not post his second dyno chart? __________________ SOLD MY Z MARCH 2018 - another Core OG moves on - new ride 2019 Z Corvette Grand Sport - no mods necessary but already have eyes on HFC and intakes LOL IT NEVER ENDS.

03-19-2010, 09:10 AM	#149 (permalink)
m4a1mustang A True Z Fanatic Join Date: Feb 2009 Location: Northern VA Posts: 55,385 Drives: on two wheels Rep Power: 6962	Steve, the shop never followed through to email me the graph. I was less than impressed with their operation so I am not trying to go back and see if I can get it from them. If you want, I can draw you a graph this weekend, but honestly it looks exactly like all of the G3 and Injen charts out there. Minimal gains until 7k, where the stock airboxes fall off. __________________ - Steve Zs & Coffee - Saturdays at 10AM in Fairfax, VA and Columbia, MD (Click the banner!) LIKE us on Facebook!

03-19-2010, 11:25 AM	#150 (permalink)
bejan Base Member Join Date: Feb 2010 Location: Chatsworth, CA Posts: 70 Drives: 09 Nissan 370Z PW M6 Rep Power: 15	Rep power added! Thanks m4a1!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
STILLEN Longtube G3 Intakes. Review, Dyno and Impressions.	RCZ	Intake/Exhaust	270	06-03-2015 03:25 PM
NSFW - Funny/Weird/Gross pics&vids	xDIEGOx	The Lounge (Off Topic)	7325	11-01-2014 08:33 PM
Stillen Headers installed - Review/Pics/Vid/Dyno	semtex	Intake/Exhaust	120	06-25-2014 01:15 PM
Injen Dual Cold Air Intakes Nissan 370Z Z34 : INTENSEPOWER!	INTENSEPOWER	Exhaust/Intake	138	08-08-2011 02:34 PM
370Z Injen Dual Intakes @ The 370ZSOURCE!!!!	Michael@TheZStore	Exhaust/Intake	30	10-14-2009 03:39 PM