installation cost on exhaust?

FuszNissan · 08-11-2009, 11:25 PM

If it is a Union Shop, you are okay. If non-union then it's a little high.

dyezak · 08-12-2009, 03:23 PM

10y ago when I used to work in a shop we charged $75/hr labor if you purchased the parts through us and $110/hr if you brought in parts. Accounting for inflation, I think that would be about $90/hr and $130/hr now. I haven't done this job on a 370z, but it can't be that different from the 350z. So I'd quote the following times:

Exhaust: 1hr
Swaybars: 2hr

So we are talking a total of 3hr of work, and I would have charged you $390+tax (here in TX it would come out to $422.18). Also, did you perform disposal of the old parts yourself, or did you let the shop dispose of your old parts? Cause we charged for that as well by weight, and fluids had a hazmat charge. And if you were an *** about things (anything) we would throw on a charge for all disposable items we had to use (WD-40, Loc-Tite, Sandpaper, etc).

DIGItonium · 08-12-2009, 03:53 PM

It was about $200 for HFC and CBE install. Not too shabby for something that took around 2hr...

molamann · 08-13-2009, 01:54 AM

Do shops usually frown upon bringing in my own parts? I don't mind paying a bit more and supporting local shops but they just don't seem to carry the stuff I need.

tonmed123 · 08-13-2009, 02:43 AM

Quote:

Originally Posted by m4a1mustang

What intake do you think you're going to go with? I'm about to order the Injen as soon as I hear back from another vendor with pricing.

Same here. Im gona order the black one. Im waiting on pricing too. Nice

tonmed123 · 08-13-2009, 02:53 AM

Quote:

Originally Posted by dyezak

10y ago when I used to work in a shop we charged $75/hr labor if you purchased the parts through us and $110/hr if you brought in parts. Accounting for inflation, I think that would be about $90/hr and $130/hr now. I haven't done this job on a 370z, but it can't be that different from the 350z. So I'd quote the following times:

Exhaust: 1hr
Swaybars: 2hr

So we are talking a total of 3hr of work, and I would have charged you $390+tax (here in TX it would come out to $422.18). Also, did you perform disposal of the old parts yourself, or did you let the shop dispose of your old parts? Cause we charged for that as well by weight, and fluids had a hazmat charge. And if you were an *** about things (anything) we would throw on a charge for all disposable items we had to use (WD-40, Loc-Tite, Sandpaper, etc).

I guess your right. I think it took a little longer because I screwed up and didnt give him the instructions due to some printer problems so he called Tony at F.I. and Tony
gave hime a bit of needed clarifications to make it fit perfect. I did take my own stuff back though. Maybe they included a tip in the price, I was gona bust some cash out to who ever worked on it. So I guess it was not that bad. They did after all, got the tips line up perfect. There was an issue with the first CBE's that went out that was later corrected by F.I.. We are talking mm's difference. all is well that ends well.

I opened her up yesterday @ 120mph. The exahaust sounded so SWEET!

tonmed123 · 08-13-2009, 02:55 AM

Quote:

Originally Posted by molamann

Do shops usually frown upon bringing in my own parts? I don't mind paying a bit more and supporting local shops but they just don't seem to carry the stuff I need.

Yeah I know what you mean. Next time, Im going to a shop that specializes in just Z's. We have one here in Houston called Awsome Z. Im gona take it there to get my suspension modded later.

F.I. Inc. · 08-13-2009, 03:54 PM

Quote:

Originally Posted by tonmed123

Just got my Fast Intentions exhaust system installed HFC/18 inch Resonators and CBE. Sounds so good. Deep. Just curious on how much everyone is paying to get their exhaust installed? Today I got all mentioned above and a set of swaybars installed. When it was said and gone the place charged me $525. It took longer than expected do the installation because I couldn't print out the installation instructions but even so it seems a little steep.

or

BTW so much thanks for the technical support provided by Tony at Fast Intentions on this.

Ouch,

$525.00 !!!!

I charge $80.00 per hour.

1 Hour for the front sway bar.
1/2 Hour for the back sway bar.
1.5 Hours for the HFC's
1 Hour for the Cat Back

Totaling: 4 Hours = $320.00

Now, it could be because they had part of your exhaust installed wrong because they did not have the instructions. Once he called me, I walked him through it and it fit flawless! Either way, I am glad you are enjoying it. Please do not hesitate to ask if you have any further questions...

Thanks, Tony

08-11-2009, 11:25 PM	#16 (permalink)
FuszNissan A True Z Fanatic Join Date: May 2009 Location: St. Louis Posts: 14,275 Drives: Pure Sex Rep Power: 542	If it is a Union Shop, you are okay. If non-union then it's a little high. __________________ Mods: Too Many to list! LouFuszNissan ZDAYZ 2012

08-12-2009, 03:53 PM	#18 (permalink)
DIGItonium A True Z Fanatic Join Date: Jan 2009 Location: Kansas Posts: 3,800 Drives: 09 Z34-TT 6MT Rep Power: 42	It was about $200 for HFC and CBE install. Not too shabby for something that took around 2hr... __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Cost to lease 370z?	dsblk350z	Nissan 370Z Pricing / Ordering Discussions	40	02-09-2012 12:57 PM
370Z NISMO Exhaust Installation Instructions	AK370Z	Nissan 370Z Owners Manual / Service Manuals	6	01-11-2012 08:48 AM
CF Spoiler that doesn't cost 2K+	FuszNissan	Exterior & Interior	17	10-18-2009 06:38 PM
Any one else' Z cost this much?	370Z_Girl_close	Canada	8	04-24-2009 02:23 PM
Best Gas for Performance, Mileage, Cost ?	scorpion90	Nissan 370Z General Discussions	28	03-26-2009 06:15 PM

08-12-2009, 03:23 PM	#17 (permalink)
dyezak Base Member Join Date: Dec 2008 Location: TX Posts: 26 Drives: Crossfire Rep Power: 16	10y ago when I used to work in a shop we charged $75/hr labor if you purchased the parts through us and $110/hr if you brought in parts. Accounting for inflation, I think that would be about $90/hr and $130/hr now. I haven't done this job on a 370z, but it can't be that different from the 350z. So I'd quote the following times: Exhaust: 1hr Swaybars: 2hr So we are talking a total of 3hr of work, and I would have charged you $390+tax (here in TX it would come out to $422.18). Also, did you perform disposal of the old parts yourself, or did you let the shop dispose of your old parts? Cause we charged for that as well by weight, and fluids had a hazmat charge. And if you were an *** about things (anything) we would throw on a charge for all disposable items we had to use (WD-40, Loc-Tite, Sandpaper, etc).

08-13-2009, 01:54 AM	#19 (permalink)
molamann A True Z Fanatic Join Date: Jan 2009 Location: Los Angeles Posts: 1,666 Drives: 370Z with NAVVVVV Rep Power: 284	Do shops usually frown upon bringing in my own parts? I don't mind paying a bit more and supporting local shops but they just don't seem to carry the stuff I need.