GTM Performance Engineering: GTR Manifold Conversion

roplusbee · 09-28-2013, 08:26 PM

It is not far fetched to think that the donor vehicle(s) will be finished shortly. If you are waiting on "mass" production of the one off items, then you may have to have some decent patience.

V8Killer · 10-26-2013, 12:00 PM

Still no update

VQZ34nismo · 10-28-2013, 12:21 PM

Cant wait to see dyno results!!!

Chuck33079 · 10-28-2013, 12:24 PM

Quote:

Originally Posted by VQZ34nismo

Cant wait to see dyno results!!!

Sure you can. And you will.

This thing's not on the back burner anymore. It's not even on the stove at this point.

VQZ34nismo · 10-28-2013, 12:30 PM

Quote:

Originally Posted by Chuck33079

Sure you can. And you will.

This thing's not on the back burner anymore. It's not even on the stove at this point.

If I waited almost a year to get my cosworth plenum for my 350z, im sure I can wait a couple of months

Chuck33079 · 10-28-2013, 12:34 PM

Quote:

Originally Posted by VQZ34nismo

If I waited almost a year to get my cosworth plenum for my 350z, im sure I can wait a couple of months

That's the right attitude to have with these guys.

They make great stuff, but they do it on their own schedule. I wouldn't expect to see them move the ball on this one until the MHI kits start moving out the door.

SPOHN · 10-28-2013, 02:30 PM

Quote:

Originally Posted by VQZ34nismo

If I waited almost a year to get my cosworth plenum for my 350z, im sure I can wait a couple of months

Really. That Cosworth plenum took forever. The Crawford one was great also. On my 350Z I had the ever so lame Kinetix plenum and when swapping it out to the Crawford I gain 32whp on my Turbonetics kit.

Alstann · 10-28-2013, 02:32 PM

Quote:

Originally Posted by Chuck33079

Sure you can. And you will.

This thing's not on the back burner anymore. It's not even on the stove at this point.

If this plenum was a steak, it's probably back into a cow at this point.

tturbo370z · 10-28-2013, 06:26 PM

Mine should be done someday

this is the lower part of the manifold with the aquamist jets installed and big a$$ fuel rails

370Z JT · 10-28-2013, 08:38 PM

Lol at someday.

blackonorange · 10-29-2013, 04:52 AM

Well then....

elperuano · 10-29-2013, 10:26 AM

Quote:

Originally Posted by Chuck33079

Sure you can. And you will.

This thing's not on the back burner anymore. It's not even on the stove at this point.

VQZ34nismo · 10-29-2013, 11:31 AM

Quote:

Originally Posted by SPOHN

Really. That Cosworth plenum took forever. The Crawford one was great also. On my 350Z I had the ever so lame Kinetix plenum and when swapping it out to the Crawford I gain 32whp on my Turbonetics kit.

hey Spohn, im david, alex's Gallardo friend from Miami, we rode with the forged crew to zdayz last year, remember I had the small incident with my blue Z at tail of the dragon.

SPOHN · 10-29-2013, 01:29 PM

Quote:

Originally Posted by VQZ34nismo

hey Spohn, im david, alex's Gallardo friend from Miami, we rode with the forged crew to zdayz last year, remember I had the small incident with my blue Z at tail of the dragon.

Yes, I remember. How's it been going?

VQZ34nismo · 10-29-2013, 02:04 PM

Quote:

Originally Posted by SPOHN

Yes, I remember. How's it been going?

Good man, after all the headaches with the blue Z, I bought another Z 06 rev up, but I decided to change a bit and I bought the nismo, I still didn't get to install the momentum turbo kit in the 350z

09-28-2013, 08:26 PM	#136 (permalink)
roplusbee A True Z Fanatic Join Date: Dec 2009 Location: Killeen, TX Posts: 2,360 Drives: 2007 350Z NISMO Rep Power: 22	It is not far fetched to think that the donor vehicle(s) will be finished shortly. If you are waiting on "mass" production of the one off items, then you may have to have some decent patience. Dzel and tturbo370z like this. __________________ 2007 350Z NISMO #0618: Zerolift \| UPREV \| F.I. \| Greddy \| Competition Clutch \| Injector Dynamics \| Aeromotive \| Pioneer \| JL

10-26-2013, 12:00 PM	#137 (permalink)
V8Killer A True Z Fanatic Join Date: Feb 2011 Location: Newport, NC Posts: 1,127 Drives: It Hard Till It Pops Rep Power: 16	Still no update __________________ "Punch" Too much to list and a baby shot of nitrous....

10-28-2013, 08:38 PM	#145 (permalink)
370Z JT A True Z Fanatic Join Date: Jan 2010 Location: United States Posts: 2,905 Drives: 370Z PW 7AT Rep Power: 378	Lol at someday. tturbo370z likes this. __________________ Click for My Journal Top Secret \| EVO-R \| Fujimura Auto \| Shine Auto \| Seibon \| MRWorks \| Swift \| SPC \| SSR \| UpRev \| Project Kics \| NST \| Titek \| Eibach \| Nismo \| Whiteline \| Quaife \| Invidia \| Fly1 \| CF Element \| Carbon Signal

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GT-R intake manifold conversion progress?	NewYorkJon34	Intake/Exhaust	57	04-11-2014 09:57 AM
GTM Performance Engineering:PROJECT: VQ42VHR S/C	SAM@GTM	Forced Induction	32	06-02-2012 12:38 AM
Motordyne Engineering M370 Manifold	worldfamousz	Intake/Exhaust	14	10-20-2010 03:14 AM
GTR conversion manifold?	1slow370	Intake/Exhaust	16	07-06-2010 03:09 PM
GTM Performance Engineering & Forged Performance	azn370z	Forced Induction	59	04-14-2010 01:07 AM

10-28-2013, 12:21 PM	#138 (permalink)
VQZ34nismo Base Member Join Date: Oct 2013 Location: Miami Beach Posts: 145 Drives: 2010 370z Nismo Rep Power: 12	Cant wait to see dyno results!!!

10-29-2013, 04:52 AM	#146 (permalink)
blackonorange A True Z Fanatic Join Date: Jul 2011 Location: Saskatchewan Posts: 1,078 Drives: 09 370z Rep Power: 16	Well then....