GTM Performance Engineering: GTR Manifold Conversion

V8Killer · 09-11-2013, 02:09 PM

Just got off the phone with Mike. It is going to be a long time till we see anything.

Alstann · 09-11-2013, 02:26 PM

Quote:

Originally Posted by V8Killer

Just got off the phone with Mike. It is going to be a long time till we see anything.

Any way you can narrow that down?

Chuck33079 · 09-11-2013, 02:28 PM

Quote:

Originally Posted by Alstann

Any way you can narrow that down?

$5 says after the MHI kits start to get shipped out.

G37sHKS · 09-11-2013, 02:30 PM

Quote:

Originally Posted by V8Killer

Just got off the phone with Mike. It is going to be a long time till we see anything.

tell us something we dont know

V8Killer · 09-11-2013, 02:47 PM

The reason I called was b/c I was under the impression this kit was available but apparently it is not. I was actually calling to make the purchase as I need the lower plenum so I could ship it out to get my direct port nitrous project started. I was informed that only 2 prototypes are available. No time was given. I asked about the strut brace. They haven't even started on it.

NickD · 09-11-2013, 03:01 PM

G37sHKS · 09-11-2013, 03:14 PM

I was looking to get GTR conversion before fine tune and get the strut brace later when they release it Im even interested in it before dyno results beacuse i dont care about dyno graphs but looks like we wont see anything till all MHI kit are shipped.

I might get my interest back to Doran racing manifold or whoever makes one first to eliminate this stock plastic manifold

1cleanZ · 09-11-2013, 04:16 PM

Quote:

Originally Posted by V8Killer

The reason I called was b/c I was under the impression this kit was available but apparently it is not. I was actually calling to make the purchase as I need the lower plenum so I could ship it out to get my direct port nitrous project started. I was informed that only 2 prototypes are available. No time was given. I asked about the strut brace. They haven't even started on it.

yeeeah, sounds about right about how things are going there right now. We'll see if the MHI kit is ever finished...

brucelidat · 09-11-2013, 04:39 PM

Wow, they started this thread waaay too early then and they even have it listed with a price too, damn. Not expecting any updates until 2014 now...

Kingbaby · 09-11-2013, 06:05 PM

continue to save

tturbo370z · 09-28-2013, 01:10 AM

I hope it shouldn't be much Longer as one of the cars they have been working on is mine

I can say from the mock up of the piping they are doing on the car it's going to be sexy.

Kingbaby · 09-28-2013, 06:24 AM

nice man...after they mock up that last intake pipe i'd ask them for it to polish/wrinkle paint it...

moar

V8Killer · 09-28-2013, 07:02 AM

Quote:

Originally Posted by tturbo370z

I hope it shouldn't be much Longer as one of the cars they have been working on is mine

I can say from the mock up of the piping they are doing on the car it's going to be sexy.

You got a rough estimate on when you will get your car back?

tturbo370z · 09-28-2013, 09:46 AM

Quote:

Originally Posted by Kingbaby

nice man...after they mock up that last intake pipe i'd ask them for it to polish/wrinkle paint it...

moar

It will be going to polish once it's all put together nicely. I'm not wanting to do anything that will delay the already long wait such as thermal costing etc although I would like to

DIGItonium · 09-28-2013, 12:13 PM

I think thermal coating is less labor intensive than polishing. I had mine powdercoated black.

09-11-2013, 02:09 PM	#121 (permalink)
V8Killer A True Z Fanatic Join Date: Feb 2011 Location: Newport, NC Posts: 1,127 Drives: It Hard Till It Pops Rep Power: 16	Just got off the phone with Mike. It is going to be a long time till we see anything. G37sHKS likes this. __________________ "Punch" Too much to list and a baby shot of nitrous....

09-11-2013, 02:47 PM	#125 (permalink)
V8Killer A True Z Fanatic Join Date: Feb 2011 Location: Newport, NC Posts: 1,127 Drives: It Hard Till It Pops Rep Power: 16	The reason I called was b/c I was under the impression this kit was available but apparently it is not. I was actually calling to make the purchase as I need the lower plenum so I could ship it out to get my direct port nitrous project started. I was informed that only 2 prototypes are available. No time was given. I asked about the strut brace. They haven't even started on it. __________________ "Punch" Too much to list and a baby shot of nitrous....

09-11-2013, 03:01 PM	#126 (permalink)
NickD A True Z Fanatic Join Date: Mar 2012 Location: Babylon, NY Posts: 1,321 Drives: 10 Z34 Touring Vert Rep Power: 15	__________________ 2010 370z Touring Roadster Monterey Blue My Z Photo Library

09-11-2013, 03:14 PM	#127 (permalink)
G37sHKS A True Z Fanatic Join Date: Feb 2010 Location: Dubai Posts: 1,183 Drives: 09 G37S Coupe 7AT Rep Power: 20	I was looking to get GTR conversion before fine tune and get the strut brace later when they release it Im even interested in it before dyno results beacuse i dont care about dyno graphs but looks like we wont see anything till all MHI kit are shipped. I might get my interest back to Doran racing manifold or whoever makes one first to eliminate this stock plastic manifold SPOHN likes this. __________________ G37 BUILD UNDER CONSTRUCTION Last edited by G37sHKS; 09-11-2013 at 03:20 PM.

09-11-2013, 04:39 PM	#129 (permalink)
brucelidat A True Z Fanatic Join Date: Jun 2011 Location: temple city, ca Posts: 2,432 Drives: 2011 370z 7AT GM Sp Rep Power: 31	Wow, they started this thread waaay too early then and they even have it listed with a price too, damn. Not expecting any updates until 2014 now... Megan370z likes this. __________________ Works Emotion CR Ultimate - FI CBE w/ 18" resonators - Ecutek - eibach sways - Quaife - FI LTH w/race cats - kw v3 - spl - Topgunz SC - 488whp 398trq

09-28-2013, 12:13 PM	#135 (permalink)
DIGItonium A True Z Fanatic Join Date: Jan 2009 Location: Kansas Posts: 3,800 Drives: 09 Z34-TT 6MT Rep Power: 42	I think thermal coating is less labor intensive than polishing. I had mine powdercoated black. Staples and tturbo370z like this. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GT-R intake manifold conversion progress?	NewYorkJon34	Intake/Exhaust	57	04-11-2014 09:57 AM
GTM Performance Engineering:PROJECT: VQ42VHR S/C	SAM@GTM	Forced Induction	32	06-02-2012 12:38 AM
Motordyne Engineering M370 Manifold	worldfamousz	Intake/Exhaust	14	10-20-2010 03:14 AM
GTR conversion manifold?	1slow370	Intake/Exhaust	16	07-06-2010 03:09 PM
GTM Performance Engineering & Forged Performance	azn370z	Forced Induction	59	04-14-2010 01:07 AM