K&N Typhoon or Takeda Short Version

wildmark · 06-10-2013, 10:45 PM

I'm sure this has been asked before but I have done a search and nothing came up.
I have narrowed it down to this two, apart from the cost what are the difference between to two?

Regards

H2O_Doc · 06-10-2013, 10:50 PM

I can't speak to performance, but the Typhoon can be had on Amazon for $293. Not a bad deal.

Zoren 370 · 06-10-2013, 10:59 PM

I do have the typhoon don't have the numbers to speak off but k&n says about 14hp but of course it's a marketing thing. But as far as I'm concerned it works well with my z and looks very nice and aggressive in the engine bay with the twin filters showing.
Most people over here use/like the gen 3. Me I like the filters showing!

wildmark · 06-10-2013, 11:01 PM

Quote:

Originally Posted by H2O_Doc

I can't speak to performance, but the Typhoon can be had on Amazon for $293. Not a bad deal.

that's very good deal!

Zoren 370 · 06-10-2013, 11:11 PM

I say go for it you'll never go wrong with k&n!

wildmark · 06-10-2013, 11:20 PM

Quote:

Originally Posted by Zoren 370

I do have the typhoon don't have the numbers to speak off but k&n says about 14hp but of course it's a marketing thing. But as far as I'm concerned it works well with my z and looks very nice and aggressive in the engine bay with the twin filters showing.
Most people over here use/like the gen 3. Me I like the filters showing!

What's installation like?

XwChriswX · 06-10-2013, 11:27 PM

There are no real major differences in the two. They are both SRI's. The only difference really would be K&N uses an Oiled filter, where as the Takeda I believe uses a Dry filter.

For the price of either, an SRI for this motor is not wise for HP gains...

If you're going for PURE LOOKS, then I would also throw in the R2C intakes. I've seen them and they look really cool. Plus you have options on the pipe coating/color as well.

Gibby1113 · 06-10-2013, 11:28 PM

I've heard good things from the R2C intakes as well and they use dry filters. Check it out. Just another option

XwChriswX · 06-10-2013, 11:30 PM

Quote:

Originally Posted by wildmark

What's installation like?

Installation:

1. Remove Negative (-) Battery Terminal. Remove Strut Bar, Unplug MAF Sensors

2. Remove OEM Intake Boxes/Post MAF Tubes.

3. Remove MAF Sensors from OEM Post MAF tubes and insert into new intake pipes.

4. Piece together (loosely) new intakes and put in engine bay. Line them up. Tighten everything down once you're satisfied.

5. Follow either the K&N/Takeda installation instructions for any air shields that need to be installed.

6. Reinstall OEM Strut bar, plug in MAF sensors, reinstall Neg. battery terminal.

Thats it. Total time: <1 hour

Zoren 370 · 06-10-2013, 11:39 PM

The long tubes is definitely the way for hp gains but I'm more for the looks in th engine bay.
Install for the k&n the most is 45mins to an hour. Btw wrapped the tubes with thermal insulators like wrap it exhaust insulators. The tubes thus get hot inside the engine bay and made a huge difference once wrapped.
I wish I can post pictures.

Thank you Chris for the detailed install guide.

H2O_Doc · 06-11-2013, 07:13 AM

There is currently a Typhoon on Ebay for $200 used. Seller says 6000 mi on it. I'm. It sure I'd forego new to save $93 (oh, and his shipping is high).

Actually, I'm not sure this is a helpful post when I think about, but I hammered it out so there you have it.

H2O_Doc · 06-11-2013, 08:06 AM

I got to thinking about this post, because I'm in a mod quandary myself. This is a great place to get info and advice, but it is difficult sometimes because it spread out, sometimes contradictory, sometimes drawn from opinion and web-lore, and mod benefits reported often don't include the meta-data about what other mods might have been done before and how that might affect actual results.

It sometimes strikes me that there is some good data mining that could be done here (maybe data mining isn't the best phrase right now). It might be worth looking at mods by part/manufacturer and reporting actual test results (best) or other less rigorous results (not as good, but useful).

Too bad we don't have an intern.

XwChriswX · 06-11-2013, 04:07 PM

Quote:

Originally Posted by H2O_Doc

I got to thinking about this post, because I'm in a mod quandary myself. This is a great place to get info and advice, but it is difficult sometimes because it spread out, sometimes contradictory, sometimes drawn from opinion and web-lore, and mod benefits reported often don't include the meta-data about what other mods might have been done before and how that might affect actual results.

It sometimes strikes me that there is some good data mining that could be done here (maybe data mining isn't the best phrase right now). It might be worth looking at mods by part/manufacturer and reporting actual test results (best) or other less rigorous results (not as good, but useful).

Too bad we don't have an intern.

It has often been documented and quantified that SRI's are not the way to go for the (overheating) VHR motor. CAI's are sadly the way to get power out of this motors intake side.

H2O_Doc · 06-11-2013, 04:52 PM

Quote:

Originally Posted by XwChriswX

It has often been documented and quantified that SRI's are not the way to go for the (overheating) VHR motor. CAI's are sadly the way to get power out of this motors intake side.

Understood, thanks for the clarification. The scientist in me thinks it would be interesting to keep statistics on gains from the common mods. Especially interesting because there are more thank few folks that get dyno numbers. Could be a fun data set to play with.

tjlazer · 06-11-2013, 06:37 PM

the gains on the CAI vs HAI is only on the top end anyways. Only issue is the hot engine bay that can heat soak the intakes and rob HP on launches. But when cruising its all good. I dynoed the Typhoons and got ~6rwhp gains on them. I like the easy install and not modding the car to install them.

06-10-2013, 10:45 PM	#1 (permalink)
wildmark Base Member Join Date: Oct 2011 Location: Tampa, Florida Posts: 217 Drives: Chevy SS, FX50S Rep Power: 14	K&N Typhoon or Takeda Short Version I'm sure this has been asked before but I have done a search and nothing came up. I have narrowed it down to this two, apart from the cost what are the difference between to two? Regards

06-10-2013, 11:27 PM	#7 (permalink)
XwChriswX WFLYIDNNE Join Date: Jul 2009 Location: In The Fastlane Posts: 50,648 Drives: 02 GDB WRX Rep Power: 452	There are no real major differences in the two. They are both SRI's. The only difference really would be K&N uses an Oiled filter, where as the Takeda I believe uses a Dry filter. For the price of either, an SRI for this motor is not wise for HP gains... If you're going for PURE LOOKS, then I would also throw in the R2C intakes. I've seen them and they look really cool. Plus you have options on the pipe coating/color as well. __________________ Bonnie - Stage 2, Audio build coming this fall! R.I.P. Abby 3/29/10 - 3/30/14

06-10-2013, 11:28 PM	#8 (permalink)
Gibby1113 Enthusiast Member Join Date: Nov 2012 Location: On open empty highways Posts: 366 Drives: 40th anniversary Rep Power: 12	I've heard good things from the R2C intakes as well and they use dry filters. Check it out. Just another option XwChriswX likes this. __________________ 40th anniversary #450/1000 \| Takeda Attack CAI \| Ark DTS exhaust \| to be continued...

06-10-2013, 11:39 PM	#10 (permalink)
Zoren 370 A True Z Fanatic Join Date: Mar 2012 Location: FL Posts: 11,018 Drives: 11 Nissan 370 M6 Rep Power: 1913653	The long tubes is definitely the way for hp gains but I'm more for the looks in th engine bay. Install for the k&n the most is 45mins to an hour. Btw wrapped the tubes with thermal insulators like wrap it exhaust insulators. The tubes thus get hot inside the engine bay and made a huge difference once wrapped. I wish I can post pictures. Thank you Chris for the detailed install guide. XwChriswX and Gibby1113 like this. Last edited by Zoren 370; 06-10-2013 at 11:42 PM.

06-11-2013, 06:37 PM	#15 (permalink)
tjlazer A True Z Fanatic Join Date: Dec 2009 Location: Tacoma Age: 52 Posts: 2,496 Drives: Z34, R35 Rep Power: 19	the gains on the CAI vs HAI is only on the top end anyways. Only issue is the hot engine bay that can heat soak the intakes and rob HP on launches. But when cruising its all good. I dynoed the Typhoons and got ~6rwhp gains on them. I like the easy install and not modding the car to install them. __________________ 2009 370Z Monterey Blue,Nismo Conversion,RE-11's, K&N Typhoon intakes,Blue Kickplates,Homelink,FI 18" CBE,ERZ HFCs,Hotchkis sways, Swift Spec-R, EVO-R Highwing, UPREV

06-10-2013, 10:50 PM	#2 (permalink)
H2O_Doc A True Z Fanatic Join Date: Apr 2013 Location: Northern VA Posts: 1,083 Drives: '14 370Z, '12 4Runr Rep Power: 14	I can't speak to performance, but the Typhoon can be had on Amazon for $293. Not a bad deal.

06-10-2013, 10:59 PM	#3 (permalink)
Zoren 370 A True Z Fanatic Join Date: Mar 2012 Location: FL Posts: 11,018 Drives: 11 Nissan 370 M6 Rep Power: 1913653	I do have the typhoon don't have the numbers to speak off but k&n says about 14hp but of course it's a marketing thing. But as far as I'm concerned it works well with my z and looks very nice and aggressive in the engine bay with the twin filters showing. Most people over here use/like the gen 3. Me I like the filters showing!

06-10-2013, 11:11 PM	#5 (permalink)
Zoren 370 A True Z Fanatic Join Date: Mar 2012 Location: FL Posts: 11,018 Drives: 11 Nissan 370 M6 Rep Power: 1913653	I say go for it you'll never go wrong with k&n!

06-11-2013, 07:13 AM	#11 (permalink)
H2O_Doc A True Z Fanatic Join Date: Apr 2013 Location: Northern VA Posts: 1,083 Drives: '14 370Z, '12 4Runr Rep Power: 14	There is currently a Typhoon on Ebay for $200 used. Seller says 6000 mi on it. I'm. It sure I'd forego new to save $93 (oh, and his shipping is high). Actually, I'm not sure this is a helpful post when I think about, but I hammered it out so there you have it.

06-11-2013, 08:06 AM	#12 (permalink)
H2O_Doc A True Z Fanatic Join Date: Apr 2013 Location: Northern VA Posts: 1,083 Drives: '14 370Z, '12 4Runr Rep Power: 14	I got to thinking about this post, because I'm in a mod quandary myself. This is a great place to get info and advice, but it is difficult sometimes because it spread out, sometimes contradictory, sometimes drawn from opinion and web-lore, and mod benefits reported often don't include the meta-data about what other mods might have been done before and how that might affect actual results. It sometimes strikes me that there is some good data mining that could be done here (maybe data mining isn't the best phrase right now). It might be worth looking at mods by part/manufacturer and reporting actual test results (best) or other less rigorous results (not as good, but useful). Too bad we don't have an intern.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Takeda Short Ram Intakes!	Upcoming Z	Parts for sale (Private Classifieds)	29	03-19-2013 08:38 PM
[FOR SALE] Injen CAI & Takeda Short Ram	dblock6180	Parts for sale (Private Classifieds)	2	06-09-2012 12:37 PM
[FOR SALE] K&N Typhoon Short Ram Intake	Bonezzzy	Parts for sale (Private Classifieds)	5	03-26-2012 07:36 AM
Takeda Short Ram intakes	toxik	North East Region	0	05-14-2011 12:28 AM
K&N Typhoon Short Ram Dual Intake Worth it ?	hedly	Intake/Exhaust	4	04-19-2011 01:31 PM