Review: AAM Competition Cold Air Intakes S-Line/R-Line

juld0zer · 02-06-2014, 07:23 AM

since it's sold as a "cold air intake", OP do you have access to an OBD2 scanner that can display live intake air temperatures?

i have some baseline data for both the stock airboxes with cool air ducts vs the Stillen G3 which in my experience reduced IAT by 1*c in similar conditions. Although small, the reduction is enough to qualify it as a CAI, relative to the baseline - ie stock intakes.

My Stillen G3 install took about 6hrs. most of it was tidying up the install and getting stuff to fit. The 2 bolts you had to replace with zip ties, i had to replace the left hand side one with a zip tie. by nature of the Stillen's sloppy fit, i did not have to replace the RHS bolt

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NEW! AAM Competition 370z S-LINE/R-LINE Cold Air Intakes	Sales@AAMComp	Exhaust/Intake	12	12-09-2015 12:29 PM
NEW! AAM Competition 370z S-LINE/R-LINE Cold Air Intakes	Sales@AAMComp	Intake/Exhaust	15	02-06-2014 07:59 AM
AAM Competition S-LINE/R-LINE Intakes... teaser :D	Sales@AAMComp	Intake/Exhaust	36	06-08-2013 12:36 PM
AAM Competition S-LINE/R-LINE Cold Air Intakes -- Need local z owner :)	Sales@AAMComp	Mid-Atlantic Region	13	05-21-2013 05:58 PM
AAM Competition S-LINE Midpipe GROUP BUY	Sales@AAMComp	Group Buys	48	03-06-2013 11:30 AM

02-06-2014, 07:23 AM	#1 (permalink)
juld0zer Enthusiast Member Join Date: Nov 2012 Location: Sydney Posts: 428 Drives: 11 Nissan 370Z MB M6 Rep Power: 139	since it's sold as a "cold air intake", OP do you have access to an OBD2 scanner that can display live intake air temperatures? i have some baseline data for both the stock airboxes with cool air ducts vs the Stillen G3 which in my experience reduced IAT by 1*c in similar conditions. Although small, the reduction is enough to qualify it as a CAI, relative to the baseline - ie stock intakes. My Stillen G3 install took about 6hrs. most of it was tidying up the install and getting stuff to fit. The 2 bolts you had to replace with zip ties, i had to replace the left hand side one with a zip tie. by nature of the Stillen's sloppy fit, i did not have to replace the RHS bolt