More airflow to intakes

Megan370z

the MAF sensor does NOT expect anything related to any speed.

It is just a sensor that detect airflow by the mean of a heated wire.
if a wind blow too much on it , yeah that will cool down the heated wire which send a signal that is received by the ECU then adjust the AFR.

depending on the intake bent and location of the MAF sensor, yeah it might not be good at certain occasion.

__________________
Megan Journal *Click Me* ....................One Man Team Motorsport *Click Me*

SouthArk370Z

+1. The MAF measures, as its name implies, mass flow, not velocity or volume. As long as you are within the operating range of the sensor, pressure and velocity at the sensor are not important. If you increase the system pressure (eg, ram air) the velocity will actually decrease to get the same mass of air into the engine (the air is more dense so it takes less volume to get the same mass).

Sensor location can make a difference due to turbulence.

The setup in the OP is not a ram air but an "enhanced" CAI. For it to be a true ram air, it would have to have the filters enclosed and sealed within the new duct work.

__________________
Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub
Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

MJB

True. I guess a true ram air would be something like...

Attached Images

titek_dual_airduct_z33b.jpg (29.4 KB, 13 views)

__________________
09 Nismo #0483 sold. Viper or C7 next time around.

SouthArk370Z

Whatever ya call it, it's still a great idea. Thanks for sharing.

__________________
Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub
Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

synolimit

You read to far into that. At 50mph more air will be sucked in than say 10mph. i was only using speed to make it simple instead of saying increased MAF volts at higher speeds or air sucking, which people might not have gotten.

__________________
13 370z-

synolimit

Actually it will measure velocity, volume and flow of air in a way. A turbo'd car will max out MAF sensors if they are installed in to small of a diameter tube. To small, the volume of space isn't enough and the volts increase maxing out the sensor and tuning cannot be completed or compensate for the change above 5.0v. The velocity of the air filling up a small tube to fast again will max out the sensor and tuning will hault. Yes in the end its still mass flow but factors effect flow.

Density has nothing to do with ram air. It has to do with heat. Hotter air is less desnse. Ram air at ambient temp is still the same temp as ambient air in a closed space as long as heat soak is kept at bay. The amount of air molicules entering the engine will be the same. However a ram air will cause the senser to increase fuel which is we're the bogging and hesitation come from since wind is never going to be the same driving down the road, for example a semi blowing past you rocking your car.

__________________
13 370z-

Baer383

No it won't when the insurance adjustors look at cars they never look at them that close and most of them don't know what they are looking at anyway.

__________________
2013 ZL1

754 rwhp 747 rwtq

SouthArk370Z

Those variables can be derived (if you know other variables), but they're not what is being measured. Ofc, even the mass flow measurement is not direct, it is derived from heat loss.

"As long as you are within the operating range of the sensor,..."

Wrong on so many levels. To start with, pressure, volume, and temperature are interrelated. (that explanation tends to be overly technical, Google "PVT" for others). If you change any of those variables, something else has to change. If you increase the pressure (ram air) and the temperature stays the same (there will be a slight increase of temp anytime you compress a gas, but not important for this discussion), the volume has to decrease. When the volume decreases, the density goes up.

The raison d'être of ram air is to increase pressure which in turn increases density which means more O2 molecules per unit of volume.

__________________
Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub
Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

synolimit

I never said they were. Simply they effect the maf voltage and make the car run poorly. hence taking all that into consideration the MAF in a away measures them and/or effected by them. This isn't a science class, its a topic that having unwanted air blown in by out side forces will make the car run like **** since its more air than what the car is supposed to be ingesting.


You meant to say outside operating range. you cant max it out if its in the operating range!

You are not going to increase the pressure with this setup. The piping is not changing size or acting like a compressor in any way. The term ram air in this topic is just exposing the filter to outside air. Maybe you missed the word "ram air effect." I think I have to spell things out for you since I already said I'm talking to people so they understand but you clearly can't come down a level and read whats in front of you.

__________________
13 370z-

SouthArk370Z

But you need to have at least a little understanding of the science behind flow measurement to discuss it.

No. I said exactly what I meant.


If you don't mean "ram air" (with or without the "effect") then don't say "ram air." It will avoid a lot of confusion. How are ppl going to understand you if you don't say what you mean?

__________________
Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub
Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

370Zsteve

__________________
SOLD MY Z MARCH 2018 - another Core OG moves on - new ride 2019 Z Corvette Grand Sport - no mods necessary but already have eyes on HFC and intakes LOL IT NEVER ENDS.

DEpointfive0

Exactly what I was thinking

__________________
Do YOU want to know what/where I got my username from?

370Zsteve

You want butter and salt?

__________________
SOLD MY Z MARCH 2018 - another Core OG moves on - new ride 2019 Z Corvette Grand Sport - no mods necessary but already have eyes on HFC and intakes LOL IT NEVER ENDS.

SouthArk370Z

Welcome back, my friends, to the show that never ends. ... Come inside. Come inside.

__________________
Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub
Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

DEpointfive0

Bet your àss I do

__________________
Do YOU want to know what/where I got my username from?