|
Your idling high because your car is LEANING OUT, most definitely start with vacuum leaks, hoses throttle body intake manifold. Move onto sensors that read air flow, I.E Bank 1
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
11-14-2013, 01:13 PM
|
#29 (permalink) |
|
Base Member
Join Date: May 2013
Location: Orange County, NY
Posts: 77
Drives: 09 Brilliant Silver
Rep Power: 12  |
Your idling high because your car is LEANING OUT, most definitely start with vacuum leaks, hoses throttle body intake manifold. Move onto sensors that read air flow, I.E Bank 1 Air Fuel sensor and bank 2 Air/Fuel sensor. Next move to MAF's(not likely as you would throw a Air Fuel code and the air fuel sensor.
Bottom line 1)Vacuum leak 2)Sensors monitoring vacuum and air 3)Exhaust leak BEFORE A/F SENSOR 4) Fuel drop off causing car to throw more air through the chamber Check by disconnecting MAF's and seeing if idle changes or fluctuates at all that will rule out the sensors. |
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| P0300 / Engine RPM speed @ idle | Cmike2780 | Engine & Drivetrain | 20 | 11-26-2013 05:09 PM |
| Dreaded P0300 | oro | Engine & Drivetrain | 5 | 01-26-2013 04:32 PM |
| 2k Idle, 230 Oil Temp, High Rev Hang, Help! | bkaeser | Engine & Drivetrain | 12 | 04-22-2012 11:16 AM |
| High idle, rev hang, bog after alignment?? | Mandingo | Engine & Drivetrain | 13 | 10-22-2011 09:48 AM |
| Code P0300 after CBE install | ProfessorDave | Engine & Drivetrain | 10 | 10-26-2010 04:42 PM |
12Likes
Threaded Mode
