My 3" Exhaust Project (Test Pipe Hissing Solved)

nklear · 04-22-2013, 12:04 PM

Well here it is....

The Famous test pipe hissing sound is completely gone. 2.5" exhaust didn't let out the carbon monoxide fast enough and generated the hissing sound. Going with 3" exhaust eliminated a lot of back pressure therefore completely eliminating the hissing sound.

Next month is the famous Fast Intentions Twin Turbo setup.

I've been work with my exhaust shop for over 5 years now. If you decide to jump on a project like this, definitely source the mufflers/flex pipes yourself. Flex pipes were purchased from Amazon, Mufflers were purchased from a local manufacturer. 3" exhaust is a very tight fit, find a good and reputable shop to do the work.

I'll post up a sound clip sometime this week.

Sh0velMan · 04-22-2013, 12:12 PM

Are those Spin Tech mufflers???????????????

MUST HAVE SOUND CLIP

FPenvy · 04-22-2013, 12:15 PM

any idea on what the performance of the 3" vs 2.5" on the N/A set up is yet?

MyKindaGuise · 04-22-2013, 12:19 PM

Quote:

Originally Posted by FPenvy

any idea on what the performance of the 3" vs 2.5" on the N/A set up is yet?

It would probably lose power at that point. That's too much flow and not enough back pressure. I actually just redid my exhaust FP. its up in the MA thread. No hiss on mine and no obnoxious rasp on decel. Just longtube headers and stock muffler delete.

FPenvy · 04-22-2013, 12:25 PM

Quote:

Originally Posted by MyKindaGuise

It would probably lose power at that point. That's too much flow and not enough back pressure. I actually just redid my exhaust FP. its up in the MA thread. No hiss on mine and no obnoxious rasp on decel. Just longtube headers and stock muffler delete.

link?

soooo no mufflers and any resonators? sounds like without mufflers you'd end up with some rasp but i could be wrong.

nklear · 04-22-2013, 12:47 PM

Quote:

Originally Posted by Sh0velMan

Are those Spin Tech mufflers???????????????

MUST HAVE SOUND CLIP

Yes Sir! I run that **** on all my cars. hahaha

I will post a sound click this week.

MyKindaGuise · 04-22-2013, 12:48 PM

Quote:

Originally Posted by FPenvy

link?

soooo no mufflers and any resonators? sounds like without mufflers you'd end up with some rasp but i could be wrong.

Well it is raspier than usual on accel just none on decal which I had terrible amounts of that with the ark+FI combo.

Ill post the video hang on

EDIT

370Z Cold Start. LOUD! - YouTube

https://www.youtube.com/watch?v=itY2...gdata_playerMy

2.5" LTH's and 2.25" stock exhaust with custom short tails.

Its atleast 25% louder over the ARK+FI combo

nklear · 04-22-2013, 12:49 PM

Quote:

Originally Posted by FPenvy

any idea on what the performance of the 3" vs 2.5" on the N/A set up is yet?

100% there is a power loss do to lack of back pressure. (probably power loss from 0 to 4000rpms, maybe a power gain from 4000 to 7500rpms)

FPenvy · 04-22-2013, 01:35 PM

Quote:

Originally Posted by MyKindaGuise

Well it is raspier than usual on accel just none on decal which I had terrible amounts of that with the ark+FI combo.

Ill post the video hang on

EDIT

370Z Cold Start. LOUD! - YouTube

https://www.youtube.com/watch?v=itY2...gdata_playerMy

2.5" LTH's and 2.25" stock exhaust with custom short tails.

Its atleast 25% louder over the ARK+FI combo

soooo you're saying that my non-res TP and CBE set up will be super loud when i make my own short tails? lol

MyKindaGuise · 04-22-2013, 02:10 PM

Quote:

Originally Posted by FPenvy

soooo you're saying that my non-res TP and CBE set up will be super loud when i make my own short tails? lol

It certainly will haha.

SS_Firehawk · 04-22-2013, 02:43 PM

Quote:

Originally Posted by MyKindaGuise

It would probably lose power at that point. That's too much flow and not enough back pressure. I actually just redid my exhaust FP. its up in the MA thread. No hiss on mine and no obnoxious rasp on decel. Just longtube headers and stock muffler delete.

Relieving back-pressure will always increase power, but at the expense of low end. The power loss being felt is most likely the loss in velocity of the exhaust gasses at low rpm. The returns in top end of course diminish the larger you go. Hence why dual 2.5" recommended, 2.75 max on a NA car, heck maybe even on supercharged Z's too.

N0SL3N · 04-22-2013, 03:27 PM

You should use mandrel bending to reduce the restriction in the corners.

Dzel · 04-22-2013, 03:36 PM

2.75 all day! I'll be doing a review later this week on my Beluga CBE. As of right now I have CNT resonated TP's with the 2 end resonators deleted off of my stock exhaust. Very loud especially at a cold start. I'll run sound clips of before and after.

Sh0velMan · 04-25-2013, 10:04 AM

Sound clip???

Dzel · 04-25-2013, 11:36 AM

Lol I meant a vid.

04-22-2013, 12:04 PM	#1 (permalink)
nklear Base Member Join Date: Dec 2012 Location: Los Angeles Posts: 192 Drives: 13 Nissan 370z TT M6 Rep Power: 13	My 3" Exhaust Project (Test Pipe Hissing Solved) Well here it is.... The Famous test pipe hissing sound is completely gone. 2.5" exhaust didn't let out the carbon monoxide fast enough and generated the hissing sound. Going with 3" exhaust eliminated a lot of back pressure therefore completely eliminating the hissing sound. Next month is the famous Fast Intentions Twin Turbo setup. I've been work with my exhaust shop for over 5 years now. If you decide to jump on a project like this, definitely source the mufflers/flex pipes yourself. Flex pipes were purchased from Amazon, Mufflers were purchased from a local manufacturer. 3" exhaust is a very tight fit, find a good and reputable shop to do the work. I'll post up a sound clip sometime this week.

04-22-2013, 12:12 PM	#2 (permalink)
Sh0velMan A True Z Fanatic Join Date: Jan 2012 Location: Dallas/Ft.Worth Posts: 3,349 Drives: Noisily. Rep Power: 20	Are those Spin Tech mufflers??????????????? MUST HAVE SOUND CLIP __________________ Buy My Car! \| Build Thread

04-22-2013, 03:27 PM	#12 (permalink)
N0SL3N Enthusiast Member Join Date: Dec 2011 Location: Toronto Posts: 376 Drives: 2009 PG 370z 6MT Rep Power: 35	You should use mandrel bending to reduce the restriction in the corners. __________________ \| Akuma \| Motordyne \| Z1 \| NST \| CNT \| Stillen \| Avant Garde \| RJM \| Performix \| Tint \| LED \| GTR \| Nissan \|

04-22-2013, 03:36 PM	#13 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 23	2.75 all day! I'll be doing a review later this week on my Beluga CBE. As of right now I have CNT resonated TP's with the 2 end resonators deleted off of my stock exhaust. Very loud especially at a cold start. I'll run sound clips of before and after. __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

04-25-2013, 10:04 AM	#14 (permalink)
Sh0velMan A True Z Fanatic Join Date: Jan 2012 Location: Dallas/Ft.Worth Posts: 3,349 Drives: Noisily. Rep Power: 20	Sound clip??? __________________ Buy My Car! \| Build Thread

04-25-2013, 11:36 AM	#15 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 23	Lol I meant a vid. __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
exhaust/test pipe installer in southern maine	iron1mike	Intake/Exhaust	3	04-14-2012 10:29 PM
MXP-Performance Exhaust and Test Pipe	GetYourWheels	Exhaust/Intake	27	10-12-2011 11:05 AM
Before / After Dyno - Weldina Exhaust, Custom 2.5" X-Pipe, Test Pipes	'10Anamoly	Intake/Exhaust	19	03-01-2011 09:38 AM
Meisterschaft Exhaust + F.I Test Pipe	holmanyu	Intake/Exhaust	41	12-12-2010 11:33 AM
Test pipe with stock exhaust	jnaut	Intake/Exhaust	1	04-12-2010 12:23 AM