Stillen Gen 3 Install service light issue

cg2006 · 04-17-2013, 10:10 PM

Hey everyone - I just got mine installed and I feel that the car is a bit slower now compared to when it was stock. I am also getting a service engine soon after the install. The shop told me there is some part they can put on for $95 to block the maf service engine light from coming on. Does this sound right and should my car feel slower? It definitely felt like it had more of a kick prior to the install. Any advice would be appreciated. I reviewed the pics on the first page and everything looks right btw.

Alexwallace23 · 04-17-2013, 10:32 PM

Quote:

Originally Posted by cg2006

Hey everyone - I just got mine installed and I feel that the car is a bit slower now compared to when it was stock. I am also getting a service engine soon after the install. The shop told me there is some part they can put on for $95 to block the maf service engine light from coming on. Does this sound right and should my car feel slower? It definitely felt like it had more of a kick prior to the install. Any advice would be appreciated. I reviewed the pics on the first page and everything looks right btw.

That doesn't sound right at all. If I were you I would take the tubes apart and see if one of them is blocked up. Besides this I don't know what to tell you. Try calling Stillen and see if they can help you with this issue.

gSwift · 04-18-2013, 02:20 AM

Quote:

Originally Posted by cg2006

Hey everyone - I just got mine installed and I feel that the car is a bit slower now compared to when it was stock. I am also getting a service engine soon after the install. The shop told me there is some part they can put on for $95 to block the maf service engine light from coming on. Does this sound right and should my car feel slower? It definitely felt like it had more of a kick prior to the install. Any advice would be appreciated. I reviewed the pics on the first page and everything looks right btw.

Yeah this doesn't sound right at all. Double check all your connections and vacuum lines. But I definitely wouldn't pay 95 to block the service light from coming on when you should be able to fix it for free. Good luck though and keep us posted.

cg2006 · 04-18-2013, 03:20 AM

Quote:

Originally Posted by gSwift

Yeah this doesn't sound right at all. Double check all your connections and vacuum lines. But I definitely wouldn't pay 95 to block the service light from coming on when you should be able to fix it for free. Good luck though and keep us posted.

How would you fix it for free? All the tubes were clear before install. Does the ecu need a reset to pickup the new intake? And if so, how do you do that?

Alexwallace23 · 04-18-2013, 06:30 AM

Quote:

Originally Posted by cg2006

How would you fix it for free? All the tubes were clear before install. Does the ecu need a reset to pickup the new intake? And if so, how do you do that?

Check out this link: stillen gen 3 intake install,check engine light? - MY350Z.COM Forums

This is for a 350Z but it might lead you to a solution.

cg2006 · 04-19-2013, 12:17 AM

Quote:

Originally Posted by Alexwallace23

Check out this link: stillen gen 3 intake install,check engine light? - MY350Z.COM Forums

This is for a 350Z but it might lead you to a solution.

Didn't help unfortunately.

Trips · 04-19-2013, 12:48 AM

I would make sure the maf sensors, and hoses are on correctly

Have you reset the ecu by disconnecting the negative side of the battery and reconnecting it?

roy'sz · 04-19-2013, 12:49 AM

Did you in any way shape or form touch the sensors? Could they have a oily sheen on them? What error code are you pulling??

Trips · 04-19-2013, 12:52 AM

Quote:

Originally Posted by roy'sz

Did you in any way shape or form touch the sensors? Could they have a oily sheen on them? What error code are you pulling??

Thats another possibility or that one may have been damaged during install

But without a code reader thats just being premature

cg2006 · 04-19-2013, 11:01 AM

No the sensors were not touched that I'm aware of. There's no way of resetting the ecu without unplugging the negative cable? How long do you have to unplug it for? And I have a check engine light on now. The shop told me that's bc there is too much air coming in and the computer is recognizing that as not normal.

Alexwallace23 · 04-19-2013, 12:17 PM

Quote:

Originally Posted by cg2006

No the sensors were not touched that I'm aware of. There's no way of resetting the ecu without unplugging the negative cable? How long do you have to unplug it for? And I have a check engine light on now. The shop told me that's bc there is too much air coming in and the computer is recognizing that as not normal.

CG you seem like you are very hesitant when it comes to doing anything to your car by yourself. Right now you are relying on people that somehow screwed up your install to fix your issue. You are assuming that the pipes are clear because that's probably how you handed it over to them. You are again assuming that the sensors were not touched. So far no one on this forum has agreed with what the shop is telling you. So to me it's obvious that the guys in this shop are not experienced with this setup.

Call Stillen and see if they can help you. Stillen was very helpful with me when I had concerns about this intake system. So they should be able to at least lead you in the right direction on how to fix this. If you don't want to call Stillen then go to a different shop or even try taking it to a Nissan dealership.

At the very minimum, try to find out what the CEL code is and post it on here.

cg2006 · 04-19-2013, 01:13 PM

Thanks for the tip. I will contact Stillen but can you please answer my questions above?

roy'sz · 04-19-2013, 02:37 PM

Quote:

Originally Posted by cg2006

Thanks for the tip. I will contact Stillen but can you please answer my questions above?

The answer to your question: "NO"

Alexwallace23 · 04-19-2013, 04:46 PM

Quote:

Originally Posted by cg2006

Thanks for the tip. I will contact Stillen but can you please answer my questions above?

Hey man I'm sorry you are having issues with your intake but you are not giving us the information we need to help you.

Disconnecting the negative terminal for even a split second will reset everything in the car. If you want to be sure about it then disconnect it, go drop a deuce, and then reconnect it.

I could be wrong but I don't think that will fix your issue. Try to get the CEL code so that the experienced guys on here can help you.

roy'sz · 04-19-2013, 05:23 PM

Quote:

Originally Posted by Alexwallace23

This is doing way too much if you ask me. It is very easy to take off the OEM intake by disconnecting both ends of the tube first. You have plenty of room to do this. Installing the new intake is fairly easy to do with the brace on. Just position the clamp at an angle where the brace is not blocking the screws on the clamps.

This tip will also help, alex, when you install the m370 manifold. If you can do that without taking off the upper strut brace then

04-17-2013, 10:10 PM	#1 (permalink)
cg2006 Enthusiast Member Join Date: Mar 2013 Location: NJ Posts: 269 Drives: Your Girl Wild! Rep Power: 12	Stillen Gen 3 Install service light issue Hey everyone - I just got mine installed and I feel that the car is a bit slower now compared to when it was stock. I am also getting a service engine soon after the install. The shop told me there is some part they can put on for $95 to block the maf service engine light from coming on. Does this sound right and should my car feel slower? It definitely felt like it had more of a kick prior to the install. Any advice would be appreciated. I reviewed the pics on the first page and everything looks right btw.

04-19-2013, 12:48 AM	#7 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,732 Drives: 🔰 Rep Power: 10	I would make sure the maf sensors, and hoses are on correctly Have you reset the ecu by disconnecting the negative side of the battery and reconnecting it? __________________

04-19-2013, 12:49 AM	#8 (permalink)
roy'sz A True Z Fanatic Join Date: Aug 2011 Location: palmdale, ca Posts: 1,299 Drives: 2010 nissan 370z Rep Power: 16	Did you in any way shape or form touch the sensors? Could they have a oily sheen on them? What error code are you pulling?? __________________ https://www.youtube.com/watch?v=RtvG...data_playerARK HFC'S-ARK Grip-Stillen G3-M370-UPREV-Kinetix upper control arm-WC Latheworks-Stage2 Bad@$$ Driver(318whp/268tq)-

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HELP!! service engine light on....anyone?	gabo	Intake/Exhaust	19	05-22-2015 02:47 PM
Service Engine Light Soon Light after Exhaust Install	chrislee	Intake/Exhaust	8	01-12-2013 12:18 AM
Service Engine Soon light	scottIN	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	19	12-30-2012 09:36 PM
service engine soon light help	gunner	Nissan 370Z General Discussions	15	12-19-2012 04:07 AM
Service Engine Soon light after HU install	toxik	Audio & Video	17	09-20-2010 03:31 PM

04-19-2013, 11:01 AM	#10 (permalink)
cg2006 Enthusiast Member Join Date: Mar 2013 Location: NJ Posts: 269 Drives: Your Girl Wild! Rep Power: 12	No the sensors were not touched that I'm aware of. There's no way of resetting the ecu without unplugging the negative cable? How long do you have to unplug it for? And I have a check engine light on now. The shop told me that's bc there is too much air coming in and the computer is recognizing that as not normal.

04-19-2013, 01:13 PM	#12 (permalink)
cg2006 Enthusiast Member Join Date: Mar 2013 Location: NJ Posts: 269 Drives: Your Girl Wild! Rep Power: 12	Thanks for the tip. I will contact Stillen but can you please answer my questions above?