why is nobody running these headers??

edub370 · 02-23-2013, 10:17 AM

Quote:

Originally Posted by N0SL3N

Where do you see 5 holes? I see 3 on the flange to the cat and 8 to the block.

I was referring to the large holes on the flange that connects to the block. But now that i can see a lil better than my phone was allowing, i see they are just open places between each header

Sh0velMan · 02-23-2013, 10:43 AM

Quote:

Originally Posted by SPOHN

Wanne bet? I'd do some more research here. Momentum headers have been blowing everyone out of the water. You must be comparing to the other crappy headers out there.

Chris, they haven't been blowing longtubes out of the water... Every other shorty, definitely.

No one has done a direct comparison to the PPE stepped headers, but the results have been comparable, sort of. My 326-330whp is with the PPEs on an OEM exhaust system... We'll see what they do with the fast intentions exhaust in May.

7419sundat · 02-23-2013, 10:56 AM

First mod: PPE Headers... +35WHP

Look up that thread. They seem to be on par if not better.

SPOHN · 02-23-2013, 12:06 PM

Quote:

Originally Posted by Sh0velMan

Chris, they haven't been blowing longtubes out of the water... Every other shorty, definitely.

No one has done a direct comparison to the PPE stepped headers, but the results have been comparable, sort of. My 326-330whp is with the PPEs on an OEM exhaust system... We'll see what they do with the fast intentions exhaust in May.

Cost to HP

chrischhorn · 02-23-2013, 12:29 PM

Quote:

Originally Posted by SPOHN

Wanne bet? I'd do some more research here. Momentum headers have been blowing everyone out of the water. You must be comparing to the other crappy headers out there.

Spohn....I understand that but as seeing as they aren't readily available, I don't count them so yes, as you determined I am comparing it to the other shorty headers out there. I mean look at my sig.....I'm running momentum headers

SPOHN · 02-23-2013, 12:36 PM

Doug@PTUNING · 02-26-2013, 11:41 AM

Quote:

Originally Posted by 7419sundat

First mod: PPE Headers... +35WHP

Look up that thread. They seem to be on par if not better.

That a good power gain.

Sh0velMan · 02-26-2013, 11:44 AM

Quote:

Originally Posted by SPOHN

Cost to HP

Didn't those momentum headers cost you around 800 plus TPs?

Even if they were 600 plus TP's, you're still damned close to the cost of the PPE's.

And you can't really get momentums if you don't already have them so... yeah.

If it works, it works. That's what I say.

AlexRaymond19 · 02-26-2013, 01:31 PM

Quote:

Originally Posted by Sh0velMan

Chris, they haven't been blowing longtubes out of the water... Every other shorty, definitely.

No one has done a direct comparison to the PPE stepped headers, but the results have been comparable, sort of. My 326-330whp is with the PPEs on an OEM exhaust system... We'll see what they do with the fast intentions exhaust in May.

Sure there is...

Z1 Motorsports: 326rwhp with Stock exhaust

AlexRaymond19 · 02-26-2013, 01:36 PM

Quote:

Originally Posted by Sh0velMan

Didn't those momentum headers cost you around 800 plus TPs?

Even if they were 600 plus TP's, you're still damned close to the cost of the PPE's.

And you can't really get momentums if you don't already have them so... yeah.

If it works, it works. That's what I say.

I paid like 500 for my headers, and brand new test pipes at Z1 were 140. I thought PPE LTH were over 1k? Even if they were 600, plus tps, its still cheaper. Keep in mind the use the old DE 350 style test pipe/cat and is much cheaper than the 370 counterpart

diddy535 · 02-26-2013, 01:40 PM

500 for your headers? Where'd you get that deal they were 800 through z1 I'd love to get that deal

AlexRaymond19 · 02-26-2013, 01:55 PM

Z1 ran out of them. So i had to do some searching... ;-) Got them used

SS_Firehawk · 02-26-2013, 02:14 PM

I bought my PPE's with black ceramic coating used (but never used) for $750... shipped.

chrischhorn · 02-26-2013, 02:30 PM

Quote:

Originally Posted by diddy535

500 for your headers? Where'd you get that deal they were 800 through z1 I'd love to get that deal

I got my Momentum headers for $450 from an army guy here on the island. He sold his G35 and bought a G37 sedan. I told him they would fit but he just wanted a nice car instead of a race car lol.

Sh0velMan · 02-26-2013, 03:03 PM

Quote:

Originally Posted by AlexRaymond19

Sure there is...

Z1 Motorsports: 326rwhp with Stock exhaust

I don't see in that thread where they tested a car with PPE Longtubes and then put momentums + TP's and tested again?

02-23-2013, 12:36 PM	#21 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 46 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	__________________

02-26-2013, 01:40 PM	#26 (permalink)
diddy535 Track Member Join Date: Feb 2012 Location: St. Louis, MO Posts: 789 Drives: '09 370Z RAE 6MT Rep Power: 14	500 for your headers? Where'd you get that deal they were 800 through z1 I'd love to get that deal __________________ ( Click to show/hide ) http://www.the370z.com/members-370z-...ys-thread.html

02-26-2013, 01:55 PM	#27 (permalink)
AlexRaymond19 Track Member Join Date: Jun 2011 Location: Maine Posts: 771 Drives: 2010 Nissan 370z Rep Power: 15	Z1 ran out of them. So i had to do some searching... ;-) Got them used __________________ 2010 370Z Touring MT \| Stillen \| Motordyne \| Momentum\| Z1 \| Fast Intentions \| Advant Garde \| RE11 \| Swift \| SPC \| Quaife \| Whiteline \| Evo R \| 322RWHP 259ft-lb Mustang

02-26-2013, 02:14 PM	#28 (permalink)
SS_Firehawk Premium Member Join Date: Oct 2011 Location: Tampa Posts: 4,142 Drives: 13' Magma Red Nismo Rep Power: 7335	I bought my PPE's with black ceramic coating used (but never used) for $750... shipped. __________________ Old Car:GTM TSC'd 550whp / 410lbft tq @ 11.88PSI New Car: Under Construction

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Install Video/Sound Clip: FI headers/cat-back/HFC...yes headers AND HFC.	M.Bonanni	Intake/Exhaust	30	08-07-2012 11:07 AM
What nitrous kit u running	Nissan370	Forced Induction	1	10-06-2011 12:23 PM
Running Rich?	onzedge	Engine & Drivetrain	13	04-09-2011 04:47 PM
I think my oil is running a little hot..	mrsleepy1225	Engine & Drivetrain	18	10-09-2010 02:18 PM
Running Berk Test pipes...which headers should I go with?	bill2k	Engine & Drivetrain	3	08-15-2010 04:49 PM

02-23-2013, 10:56 AM	#18 (permalink)
7419sundat Base Member Join Date: Aug 2011 Location: colorado Posts: 145 Drives: 09 370z Gtm TT 2 Rep Power: 14	First mod: PPE Headers... +35WHP Look up that thread. They seem to be on par if not better.