Help me guys! I'm panicking

MJB · 02-16-2013, 09:11 PM

Quote:

Originally Posted by FairladyZ

What's causing the tip to discolor?

Oh I see, the uneven ness of the inside pipe

I read somewhere that metal polisher like Brasso can cause burnt exhaust tips to discolor. Not sure how much truth there is to that....

And the unevenness can be adjusted. Mine came the same way, takes an allen wrench and about 5 minutes to fix.

sparky · 02-16-2013, 10:23 PM

Just get them to send you a new tip for free, take it to a muffler shop and have them cut a bit of the inner pipe off and install the new tip. Costing you more but it should be reasonable and it's problem solved in one day.

theART · 02-17-2013, 05:41 AM

vinyl wrap it in desired color, problem solved.

sparky · 02-17-2013, 12:21 PM

Um I think that might melt? The discoloration is from heat right.

vancouverite · 02-17-2013, 03:38 PM

Quote:

Originally Posted by MJB

I read somewhere that metal polisher like Brasso can cause burnt exhaust tips to discolor. Not sure how much truth there is to that....

And the unevenness can be adjusted. Mine came the same way, takes an allen wrench and about 5 minutes to fix.

The discoloration happened on Day 1(actually on my way home after getting installation).The uneveness of inner tip is the result of adjustment of the outer tip(I will get nothing from adjusting tip since the inner tip is not adjustable). Ark said I will be getting for the return will be not even too, so I said I see every dts exhaust pictures online are even. I don't know if it's BS, but they said it was even at first but recently produced ones are all uneven. I'm just gonna ask for the refund or at least return without shipping cost on Monday.

chrischhorn · 02-17-2013, 04:21 PM

If it makes you feel any better.......After I installed my stillen HFC's with the CNT exhaust, the mid pipe bracket was rubbing on the driveshaft......Thats a design flaw and something I had to worry about lol. Me and a friend actually just sawed off the upper bracket to get it out of the way.....

sparky · 02-17-2013, 06:20 PM

Makes me glad I waited and went Fast Intentions, the fitment was perfect.

DEpointfive0 · 02-17-2013, 06:26 PM

Quote:

Originally Posted by vancouverite

The discoloration happened on Day 1(actually on my way home after getting installation).The uneveness of inner tip is the result of adjustment of the outer tip(I will get nothing from adjusting tip since the inner tip is not adjustable). Ark said I will be getting for the return will be not even too, so I said I see every dts exhaust pictures online are even. I don't know if it's BS, but they said it was even at first but recently produced ones are all uneven. I'm just gonna ask for the refund or at least return without shipping cost on Monday.

They should cover 100% of the return cost

Thing is... IT'S AN EXHAUST
Call them and tell them to pay for you going to an exhaust shop to have the inner and outer tips adjusted
It can't be more than $100, and it'll be 100% to the tee perfect and you can have it adjusted higher, lower, and sticking out more or less

Streetlife · 02-18-2013, 03:01 PM

Quote:

Originally Posted by UNKNOWN_370

Ark has had a long history of beyond acceptable, uneven exhausts for our cars.

Get a refund... Ark quality is in aesthetics, not fit...
Fast Intentions
AAM
Berk
CNT
etc

All are better examples of a quality exhaust for the money.

Pricier HQ exhausts
Amuse
meisterschaft
HKS
etc

I agree, Tanabe is my favorite, Amuse second , can't be beat for the overall package. For me it's always been JDM when it comes to an exhaust.

JollyGoodChap · 02-18-2013, 03:04 PM

Sucks man, hope everything works out!

jaycz · 02-18-2013, 08:55 PM

Quote:

Originally Posted by Streetlife

I agree, Tanabe is my favorite, Amuse second , can't be beat for the overall package. For me it's always been JDM when it comes to an exhaust.

Tanabe is one quality exhaust which is much overlooked on this forum. Fit and finish is spot on. I put one on and never looked back.

tu_clean · 02-19-2013, 02:02 AM

Sorry to hear about the issues here op. Im sure Ark will chime in and take care of this for you.

vancouverite · 02-19-2013, 03:08 AM

I actually called them today. I was gonna get a refund but it is too much of a haasle, so I just asked them to send me a new muffler. I will probably be getting a new one in 10 days.

Fearless_Z · 02-19-2013, 03:25 AM

I have the same problem with the passenger side muffler hanging a tad bit lower than the drivers side on my Grip V2. Theres no way to fix that huh? :/

Streetlife · 02-19-2013, 10:36 AM

Quote:

Originally Posted by jaycz

Tanabe is one quality exhaust which is much overlooked on this forum. Fit and finish is spot on. I put one on and never looked back.

Hands down it's the best. I knew how serious Tanabe was when i researched their R&D process, packing material,sus304 grade stainless steel, finish, tips, sound, etc.. I chose them over Amuse and would do it again for the 370Z. Good luck OP, hope everything works out well for you dealing with Ark on this issue.

02-16-2013, 10:23 PM	#32 (permalink)
sparky Track Member Join Date: Jul 2011 Location: Vancouver, BC Posts: 642 Drives: 12 370Z GM AT Rep Power: 15	Just get them to send you a new tip for free, take it to a muffler shop and have them cut a bit of the inner pipe off and install the new tip. Costing you more but it should be reasonable and it's problem solved in one day. __________________ 2012 370Z GM 7AT/JWM LEDs / 3M clear bra / 35% tint / GTR start button / FI CBE SS 18" RES / Momo shift knob / K & N Typhoon / Z1 hood struts / H&R 20mm f/r / illuminated kickplates

02-17-2013, 12:21 PM	#34 (permalink)
sparky Track Member Join Date: Jul 2011 Location: Vancouver, BC Posts: 642 Drives: 12 370Z GM AT Rep Power: 15	Um I think that might melt? The discoloration is from heat right. __________________ 2012 370Z GM 7AT/JWM LEDs / 3M clear bra / 35% tint / GTR start button / FI CBE SS 18" RES / Momo shift knob / K & N Typhoon / Z1 hood struts / H&R 20mm f/r / illuminated kickplates

02-17-2013, 04:21 PM	#36 (permalink)
chrischhorn A True Z Fanatic Join Date: Jan 2012 Location: Mililani, HI Posts: 1,566 Drives: 2014 Juke Nismo RS Rep Power: 16	If it makes you feel any better.......After I installed my stillen HFC's with the CNT exhaust, the mid pipe bracket was rubbing on the driveshaft......Thats a design flaw and something I had to worry about lol. Me and a friend actually just sawed off the upper bracket to get it out of the way..... DEpointfive0 likes this. __________________ R.I.P. 8/01/13 1SlowZ One day I'll have another....

02-17-2013, 06:20 PM	#37 (permalink)
sparky Track Member Join Date: Jul 2011 Location: Vancouver, BC Posts: 642 Drives: 12 370Z GM AT Rep Power: 15	Makes me glad I waited and went Fast Intentions, the fitment was perfect. PaulZ370 likes this. __________________ 2012 370Z GM 7AT/JWM LEDs / 3M clear bra / 35% tint / GTR start button / FI CBE SS 18" RES / Momo shift knob / K & N Typhoon / Z1 hood struts / H&R 20mm f/r / illuminated kickplates

02-19-2013, 02:02 AM	#42 (permalink)
tu_clean Track Member Join Date: Dec 2008 Location: Norcal Posts: 527 Drives: 10' Nismo 370z Rep Power: 18	Sorry to hear about the issues here op. Im sure Ark will chime in and take care of this for you. __________________ SSR http://www.ssr-wheels.com/ Tanabe http://www.tanabe-usa.com/ ARK http://www.arkperformance.com/ TOYO Tires http://toyotires.com/

02-17-2013, 05:41 AM	#33 (permalink)
theART Base Member Join Date: Feb 2009 Location: BC Posts: 163 Drives: To Drive Rep Power: 7822	vinyl wrap it in desired color, problem solved.

02-18-2013, 03:04 PM	#40 (permalink)
JollyGoodChap Enthusiast Member Join Date: Aug 2010 Location: Lust Angeles Posts: 328 Drives: Z34 Rep Power: 15	Sucks man, hope everything works out!

02-19-2013, 03:08 AM	#43 (permalink)
vancouverite Base Member Join Date: Feb 2013 Location: Toronto Posts: 24 Drives: 16 F82 M4 Rep Power: 12	I actually called them today. I was gonna get a refund but it is too much of a haasle, so I just asked them to send me a new muffler. I will probably be getting a new one in 10 days.

02-19-2013, 03:25 AM	#44 (permalink)
Fearless_Z Base Member Join Date: Sep 2012 Location: Center Point, LA Posts: 208 Drives: 2014 Nissan Z Nismo Rep Power: 13	I have the same problem with the passenger side muffler hanging a tad bit lower than the drivers side on my Grip V2. Theres no way to fix that huh? :/

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Guys ! Guys! Let is have a z team !!	JohnYu	South East Region	13	01-03-2013 02:14 PM
Some Z guys don't respect other Z guys	wdkwang	Nissan 370Z General Discussions	157	07-22-2011 06:25 PM
Hey Guys!	Mythic	New Nismo 370Z Owner	13	08-26-2010 06:46 AM
hi guys new here	samurai jack	New 370Z Owner	14	04-05-2010 09:27 PM
Guys, guys, I found a new Z!	nuTinmuch	The Lounge (Off Topic)	10	03-14-2010 10:11 PM