Fast Intentions heat cycle question

bldg636 · 02-15-2013, 09:54 AM

So i installed my Fast Intentions cat back system yesterday and I read that it says you should do two full heat cycles before driving regularly. I started the car and let it heat up to 180 degree oil temp, then cool down completely. I did this twice. Am i good to go and romp on the throttle now or is there more break in that needs to be done to ensure nothing breaks? Thanks in advance for the help!

jpritche · 02-15-2013, 09:59 AM

You're fine. I did a heat cycle...kinda. Drove it over 600 miles in 2 days just to keep hearing it

The Quality of the FI exhaust is top notch. If I was fine, You will be fine.

F.I. Inc. · 02-15-2013, 11:08 AM

You are good to go. I put that break in note in the instructions more as a precautionary measure. By breaking it in per the instructions, you are prolonging the life of the internals in the resonators, mufflers and tips.

If you have any questions at all, please do not hesitate to call me directly.

Thank you, Tony

DEpointfive0 · 02-15-2013, 01:04 PM

Quote:

Originally Posted by bldg636

So i installed my Fast Intentions cat back system yesterday and I read that it says you should do two full heat cycles before driving regularly. I started the car and let it heat up to 180 degree oil temp, then cool down completely. I did this twice. Am i good to go and romp on the throttle now or is there more break in that needs to be done to ensure nothing breaks? Thanks in advance for the help!

Holy shít, how long did that take?!?!?!

SS_Firehawk · 02-15-2013, 01:24 PM

Every time I see Tony Sniper a F.I. thread, I get more and more inclined to sell my $hit and buy his.

DEpointfive0 · 02-15-2013, 01:35 PM

Quote:

Originally Posted by SS_Firehawk

Every time I see Tony Sniper a F.I. thread, I get more and more inclined to sell my $hit and buy his.

Lol, I'll lowball you for your current setup

bldg636 · 02-15-2013, 01:54 PM

It took about 10-15 mins but i wasn't idling . . . i was lightly revving up to 1500 or so . .

Tony - Thanks for chiming in . . . your customer support is second to none. Anyone thinking about buying any FI products should do so with confidence. Tony's products and service are the best i've seen in the industry!

BTW . . . exhaust sounds sick! I never take my car out in the rain, and I took it to work today even though it's pouring outside just to hear more of that sweet FI exhaust growl!

SS_Firehawk · 02-15-2013, 02:10 PM

Quote:

Originally Posted by DEpointfive0

Lol, I'll lowball you for your current setup

Haha. I have the HFC and resonator for the Y pipe. Rest of course Tanabe. Spent $2,000 + shipping for all of it. PM me if you are serious lol. It may take some time before you actually get it. I'll start at 25% off.

DEpointfive0 · 02-15-2013, 03:07 PM

Quote:

Originally Posted by SS_Firehawk

Haha. I have the HFC and resonator for the Y pipe. Rest of course Tanabe. Spent $2,000 + shipping for all of it. PM me if you are serious lol. It may take some time before you actually get it. I'll start at 25% off.

I said lowball, like I'll pay 25%, LOL

I'll stop being off topic!
Tony provides amazing service

SS_Firehawk · 02-15-2013, 03:40 PM

ROFL, Well played.

Kabestro · 02-16-2013, 03:46 PM

I've searched and haven't found anything yet, is there a video or DIY for the F.I. HFC install? I'm pulling the trigger on HFC and CBE and want to install myself.

F.I. Inc. · 02-16-2013, 04:38 PM

Quote:

Originally Posted by Kabestro

I've searched and haven't found anything yet, is there a video or DIY for the F.I. HFC install? I'm pulling the trigger on HFC and CBE and want to install myself.

No video that I know of on the HFC, just the CBE. I am sure you are looking for something comparable to the "Speedy's Garage" install video. Our installation instructions will walk you through it.

Also, I know that I have a new pm from you. I am glad that you are ready to move forward. I will get back to you shortly.

Thanks, Tony

TripleBlkZ · 02-16-2013, 04:41 PM

Hey Tony, just curious what are you lead times atm? 18' res CF.

F.I. Inc. · 02-16-2013, 04:44 PM

Quote:

Originally Posted by TripleBlkZ

Hey Tony, just curious what are you lead times atm? 18' res CF.

I am still quoting about 11-13 weeks, but right now we are running more like 9-11 out. If you have any questions or would like to place an order, please do not hesitate to call me directly.

Thanks, Tony

TripleBlkZ · 02-16-2013, 04:50 PM

Quote:

Originally Posted by F.I. Inc.

I am still quoting about 11-13 weeks, but right now we are running more like 9-11 out. If you have any questions or would like to place an order, please do not hesitate to call me directly.

Thanks, Tony

Thanks man, just trying to figure out when to order. Would have done it by now but dropped a bunch of coin on a trip to Maui in April.

02-15-2013, 09:54 AM	#1 (permalink)
bldg636 Base Member Join Date: Sep 2012 Location: Florida Posts: 141 Drives: Nissan 370z Rep Power: 13	Fast Intentions heat cycle question So i installed my Fast Intentions cat back system yesterday and I read that it says you should do two full heat cycles before driving regularly. I started the car and let it heat up to 180 degree oil temp, then cool down completely. I did this twice. Am i good to go and romp on the throttle now or is there more break in that needs to be done to ensure nothing breaks? Thanks in advance for the help! __________________ Ross '11 370z Just getting started . . .

02-15-2013, 11:08 AM	#3 (permalink)
F.I. Inc. The370Z.com Sponsor Join Date: Feb 2009 Location: Simi Valley, CA Posts: 2,989 Drives: 2010 GT-R/2007 F-250 Rep Power: 685	You are good to go. I put that break in note in the instructions more as a precautionary measure. By breaking it in per the instructions, you are prolonging the life of the internals in the resonators, mufflers and tips. If you have any questions at all, please do not hesitate to call me directly. Thank you, Tony __________________ *Follow us on Facebook: Fast Intentions Inc.* Phone: (805) 522-FAST (3278) Email: tony@fastintentions.com www.fastintentions.com "FUELED BY PASSION" Last edited by F.I. Inc.; 02-15-2013 at 02:10 PM.

02-15-2013, 01:24 PM	#5 (permalink)
SS_Firehawk Premium Member Join Date: Oct 2011 Location: Tampa Posts: 4,142 Drives: 13' Magma Red Nismo Rep Power: 7335	Every time I see Tony Sniper a F.I. thread, I get more and more inclined to sell my $hit and buy his. __________________ Old Car:GTM TSC'd 550whp / 410lbft tq @ 11.88PSI New Car: Under Construction

02-15-2013, 01:54 PM	#7 (permalink)
bldg636 Base Member Join Date: Sep 2012 Location: Florida Posts: 141 Drives: Nissan 370z Rep Power: 13	It took about 10-15 mins but i wasn't idling . . . i was lightly revving up to 1500 or so . . Tony - Thanks for chiming in . . . your customer support is second to none. Anyone thinking about buying any FI products should do so with confidence. Tony's products and service are the best i've seen in the industry! BTW . . . exhaust sounds sick! I never take my car out in the rain, and I took it to work today even though it's pouring outside just to hear more of that sweet FI exhaust growl! DEpointfive0 likes this. __________________ Ross '11 370z Just getting started . . .

02-15-2013, 03:40 PM	#10 (permalink)
SS_Firehawk Premium Member Join Date: Oct 2011 Location: Tampa Posts: 4,142 Drives: 13' Magma Red Nismo Rep Power: 7335	ROFL, Well played. __________________ Old Car:GTM TSC'd 550whp / 410lbft tq @ 11.88PSI New Car: Under Construction

02-15-2013, 09:59 AM	#2 (permalink)
jpritche A True Z Fanatic Join Date: Oct 2010 Location: Cartersville, Ga Age: 32 Posts: 2,570 Drives: '15 RR, '14 IS250 Rep Power: 31	You're fine. I did a heat cycle...kinda. Drove it over 600 miles in 2 days just to keep hearing it The Quality of the FI exhaust is top notch. If I was fine, You will be fine.

02-16-2013, 03:46 PM	#11 (permalink)
Kabestro Enthusiast Member Join Date: Aug 2012 Location: Puerto Rico Posts: 331 Drives: 13 Nissan 370Z MR M6 Rep Power: 40	I've searched and haven't found anything yet, is there a video or DIY for the F.I. HFC install? I'm pulling the trigger on HFC and CBE and want to install myself.

02-16-2013, 04:41 PM	#13 (permalink)
TripleBlkZ Enthusiast Member Join Date: May 2010 Location: Kelowna, BC Posts: 333 Drives: 2014 QX50 Rep Power: 15	Hey Tony, just curious what are you lead times atm? 18' res CF.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help! Fast Intentions exhaust install question	KevinB	DIY Section (Do-It-Yourself)	4	01-18-2012 12:16 PM
Fast Intentions CB question	Kensi	Intake/Exhaust	27	08-17-2011 03:39 PM
Question For DEALERS About Allocation Cycle	Bonzo	Nissan 370Z Pricing / Ordering Discussions	2	06-28-2011 12:38 PM
Installing Fast Intentions exhaust question	Mark Gomez	Intake/Exhaust	11	05-05-2011 10:13 PM
Fast Intentions Exhuast question ??	VQHRZED	Australia/New Zealand	20	03-19-2010 10:01 PM