Hey Z1. ETA on those headers?

NismoZ70 · 07-21-2013, 03:46 PM

Really considering these headers with their HFC's and the FI 18" CBE. Would love to just have the FI LTH'S and CBE but knowing my luck I would get caught for emissions here in IL. Hopefully with this set-up I would be relatively close to what the performance gains would be with the FI LTH'S and CBE.

Joepro · 07-23-2013, 12:49 AM

Got back from vacation to work today, car is still on the lift but the headers are on, just waiting for the o2s, supposed to be here tomorrow. I wish I would have done side by side photos of these, cannot believe the horrible design of the oe headers, the pipes are flattened in places and the collectors are so restrictive IMO, just wow, tubular but total fail...

XwChriswX · 07-23-2013, 12:52 AM

Quote:

Originally Posted by Joepro

Got back from vacation to work today, car is still on the lift but the headers are on, just waiting for the o2s, supposed to be here tomorrow. I wish I would have done side by side photos of these, cannot believe the horrible design of the oe headers, the pipes are flattened in places and the collectors is so restrictive IMO, just wow, tubular but total fail...

Joe, when you get a chance, if it's not too much to ask could you forward me the total cost of your install. I'm looking at these as an option in the future, and I'm trying to look at labor costs along with purchase costs.

Joepro · 07-23-2013, 01:17 AM

I paid a tech at work under the table, motors guide pays about 7 hours for the job, most shops depending on labor rate will be between 600-800 unless they do not know what they are getting into, I asked him today if he would be willing to do more sets for anyone local and he has no issue with it, he is a young guy with a mod addiction as well, but he is a honda guy

HOWEVER he has one of the cleanest and tasteful civics you will ever see...He is a training master tech in the honda PACT program, one of few young people that are not a total f5^k up these days...I applaud him for it, thus why I trusted him to do it. He did it for $250 bucks(he though 300 would have been fair, but I got the co worker discount), word of the wise, prepare for o2 sensors, the thread ripped right off them and there is only 20k on my car, ans he soaked them in blaster overnight and used some heat, no one in the shop was expecting that, myself included, we pull sensors out of high mileage honda exhausts all day long.

SS_Firehawk · 07-23-2013, 01:36 AM

Quote:

Originally Posted by Joepro

I paid a tech at work under the table, motors guide pays about 7 hours for the job, most shops depending on labor rate will be between 600-800 unless they do not know what they are getting into, I asked him today if he would be willing to do more sets for anyone local and he has no issue with it, he is a young guy with a mod addiction as well, but he is a honda guy

HOWEVER he has one of the cleanest and tasteful civics you will ever see...He is a training master tech in the honda PACT program, one of few young people that are not a total f5^k up these days...I applaud him for it, thus why I trusted him to do it. He did it for $250 bucks(he though 300 would have been fair, but I got the co worker discount), word of the wise, prepare for o2 sensors, the thread ripped right off them and there is only 20k on my car, ans he soaked them in blaster overnight and used some heat, no one in the shop was expecting that, myself included, we pull sensors out of high mileage honda exhausts all day long.

I mentioned it in my review of my long tubes a while back that there is a chance they won't make it. $300 is waaaaaay cheap.

XwChriswX · 07-23-2013, 01:38 AM

Quote:

Originally Posted by Joepro

I paid a tech at work under the table, motors guide pays about 7 hours for the job, most shops depending on labor rate will be between 600-800 unless they do not know what they are getting into, I asked him today if he would be willing to do more sets for anyone local and he has no issue with it, he is a young guy with a mod addiction as well, but he is a honda guy

HOWEVER he has one of the cleanest and tasteful civics you will ever see...He is a training master tech in the honda PACT program, one of few young people that are not a total f5^k up these days...I applaud him for it, thus why I trusted him to do it. He did it for $250 bucks(he though 300 would have been fair, but I got the co worker discount), word of the wise, prepare for o2 sensors, the thread ripped right off them and there is only 20k on my car, ans he soaked them in blaster overnight and used some heat, no one in the shop was expecting that, myself included, we pull sensors out of high mileage honda exhausts all day long.

Thats understandable. I wonder if the fact that mine have already been pulled from the OEM headers and put into long tubes will make them easier to remove...

Eighties Meta · 07-23-2013, 01:58 AM

I am so disappointed that it'll be awhile for mine being installed along with the aam test pipes and a retune. I will relocate to tx on the 27th so I so as quickly as I can get em installed it will be done

Sent from my GT-N8013 using Tapatalk 2

UFreefer · 07-23-2013, 02:35 PM

Quote:

Originally Posted by Joepro

I paid a tech at work under the table, motors guide pays about 7 hours for the job, most shops depending on labor rate will be between 600-800 unless they do not know what they are getting into, I asked him today if he would be willing to do more sets for anyone local and he has no issue with it, he is a young guy with a mod addiction as well, but he is a honda guy

HOWEVER he has one of the cleanest and tasteful civics you will ever see...He is a training master tech in the honda PACT program, one of few young people that are not a total f5^k up these days...I applaud him for it, thus why I trusted him to do it. He did it for $250 bucks(he though 300 would have been fair, but I got the co worker discount), word of the wise, prepare for o2 sensors, the thread ripped right off them and there is only 20k on my car, ans he soaked them in blaster overnight and used some heat, no one in the shop was expecting that, myself included, we pull sensors out of high mileage honda exhausts all day long.

The thread bungs ripped off both of my OEM manifolds too....what a joke. They are basically just spot welded on.

Rusty · 07-23-2013, 02:47 PM

Give you guys a tip when installing the O2 sensors. Use lots of nickel anti-seize on the threads of the sensor. BUT keep the stuff off of the sensor section.

Joepro · 07-24-2013, 12:46 PM

The new ones came with anti sieze on it, image that. The new sound of this car about 3k is

I want to eventually get soem art pipes to take care of the rasp from the test pipes at about 2500, but I just wanted the car back on the road.

Joepro · 07-25-2013, 11:56 AM

First mod I have done that I can say there is a "noticable" power bump, this car pulls hard up top now, really hard. I threw z1 test pipes on there just to get the car on the road, but I ordered up some ART pipes, the rasp at 2500 rpm is nasty, cannot wait to get tuned. With a tune I can tell you from my experience we are in newer mustang 5.0 gt territory(know a guy with exhaust/intake/reflash) should hit the track with him next week.

Sh0velMan · 07-25-2013, 12:01 PM

Quote:

Originally Posted by Joepro

First mod I have done that I can say there is a "noticable" power bump, this car pulls hard up top now, really hard. I threw z1 test pipes on there just to get the car on the road, but I ordered up some ART pipes, the rasp at 2500 rpm is nasty, cannot wait to get tuned. With a tune I can tell you from my experience we are in newer mustang 5.0 gt territory(know a guy with exhaust/intake/reflash) should hit the track with him next week.

Be sure you get 350Z DE art pipes...

KB2 · 07-25-2013, 12:29 PM

so...these will only fit,with 350z hfc's and test pipes? so my berk hfcs wouldnt work..

chuckie311 · 07-25-2013, 01:16 PM

thats is correct..the Berk HFC will not work untill they change the flange type

KB2 · 07-25-2013, 01:58 PM

Alright thanks. Just wanted to be totally clear on that.

now,im not a master with headers...but wouldnt it still be better to just get long tube headers? Or are these just that much better?

07-23-2013, 12:49 AM	#242 (permalink)
Joepro A True Z Fanatic Join Date: Aug 2012 Location: Athens ohio Posts: 1,213 Drives: Company car Rep Power: 34	Got back from vacation to work today, car is still on the lift but the headers are on, just waiting for the o2s, supposed to be here tomorrow. I wish I would have done side by side photos of these, cannot believe the horrible design of the oe headers, the pipes are flattened in places and the collectors are so restrictive IMO, just wow, tubular but total fail... XwChriswX likes this. __________________ Swift\|Koni\|SPC\| FI CBE\|Z1\|Stillen\|Sbend\|Zspeed\|R/T Tuned\|523 whp\|458 tq\|10.5 psi\|SOLD Joepro's Journal\|Joepro's Boosted Performance Build \|Pittsburgh-Western-Pa-Ohio-Wv-Group Last edited by Joepro; 07-23-2013 at 12:53 AM.

07-23-2013, 01:17 AM	#244 (permalink)
Joepro A True Z Fanatic Join Date: Aug 2012 Location: Athens ohio Posts: 1,213 Drives: Company car Rep Power: 34	I paid a tech at work under the table, motors guide pays about 7 hours for the job, most shops depending on labor rate will be between 600-800 unless they do not know what they are getting into, I asked him today if he would be willing to do more sets for anyone local and he has no issue with it, he is a young guy with a mod addiction as well, but he is a honda guy HOWEVER he has one of the cleanest and tasteful civics you will ever see...He is a training master tech in the honda PACT program, one of few young people that are not a total f5^k up these days...I applaud him for it, thus why I trusted him to do it. He did it for $250 bucks(he though 300 would have been fair, but I got the co worker discount), word of the wise, prepare for o2 sensors, the thread ripped right off them and there is only 20k on my car, ans he soaked them in blaster overnight and used some heat, no one in the shop was expecting that, myself included, we pull sensors out of high mileage honda exhausts all day long. __________________ Swift\|Koni\|SPC\| FI CBE\|Z1\|Stillen\|Sbend\|Zspeed\|R/T Tuned\|523 whp\|458 tq\|10.5 psi\|SOLD Joepro's Journal\|Joepro's Boosted Performance Build \|Pittsburgh-Western-Pa-Ohio-Wv-Group Last edited by Joepro; 07-23-2013 at 01:19 AM.

07-23-2013, 01:58 AM	#247 (permalink)
Eighties Meta Enthusiast Member Join Date: Aug 2012 Location: Pasadena, MD Age: 54 Posts: 344 Drives: 09 370z 7AT no-sport Rep Power: 13	I am so disappointed that it'll be awhile for mine being installed along with the aam test pipes and a retune. I will relocate to tx on the 27th so I so as quickly as I can get em installed it will be done Sent from my GT-N8013 using Tapatalk 2 __________________ 2009 370z Touring 7AT/AAM 2.5 true dual exhaust/AAM DE test pipes/z1 vqde35 headers/AAM cold air intake (R-line)/Motordyne M370/Quaife LSD/z1 brake upgd pkg/Swift Spec-R springs/WhiteLine Front&Rear sway bars with endlinks

07-23-2013, 02:47 PM	#249 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,220 Drives: 2011 Nismo GM 6M Rep Power: 2684438	Give you guys a tip when installing the O2 sensors. Use lots of nickel anti-seize on the threads of the sensor. BUT keep the stuff off of the sensor section. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

07-24-2013, 12:46 PM	#250 (permalink)
Joepro A True Z Fanatic Join Date: Aug 2012 Location: Athens ohio Posts: 1,213 Drives: Company car Rep Power: 34	The new ones came with anti sieze on it, image that. The new sound of this car about 3k is I want to eventually get soem art pipes to take care of the rasp from the test pipes at about 2500, but I just wanted the car back on the road. __________________ Swift\|Koni\|SPC\| FI CBE\|Z1\|Stillen\|Sbend\|Zspeed\|R/T Tuned\|523 whp\|458 tq\|10.5 psi\|SOLD Joepro's Journal\|Joepro's Boosted Performance Build \|Pittsburgh-Western-Pa-Ohio-Wv-Group

07-21-2013, 03:46 PM	#241 (permalink)
NismoZ70 Enthusiast Member Join Date: May 2013 Location: IL Posts: 317 Drives: 2015 Subaru STI LE Rep Power: 12	Really considering these headers with their HFC's and the FI 18" CBE. Would love to just have the FI LTH'S and CBE but knowing my luck I would get caught for emissions here in IL. Hopefully with this set-up I would be relatively close to what the performance gains would be with the FI LTH'S and CBE.

07-25-2013, 11:56 AM	#251 (permalink)
Joepro A True Z Fanatic Join Date: Aug 2012 Location: Athens ohio Posts: 1,213 Drives: Company car Rep Power: 34	First mod I have done that I can say there is a "noticable" power bump, this car pulls hard up top now, really hard. I threw z1 test pipes on there just to get the car on the road, but I ordered up some ART pipes, the rasp at 2500 rpm is nasty, cannot wait to get tuned. With a tune I can tell you from my experience we are in newer mustang 5.0 gt territory(know a guy with exhaust/intake/reflash) should hit the track with him next week. 370Z JT likes this. __________________ Swift\|Koni\|SPC\| FI CBE\|Z1\|Stillen\|Sbend\|Zspeed\|R/T Tuned\|523 whp\|458 tq\|10.5 psi\|SOLD Joepro's Journal\|Joepro's Boosted Performance Build \|Pittsburgh-Western-Pa-Ohio-Wv-Group

07-25-2013, 12:29 PM	#253 (permalink)
KB2 Base Member Join Date: Apr 2010 Location: Illinois Posts: 243 Drives: 370z Rep Power: 15	so...these will only fit,with 350z hfc's and test pipes? so my berk hfcs wouldnt work..

07-25-2013, 01:16 PM	#254 (permalink)
chuckie311 Enthusiast Member Join Date: Jul 2012 Location: las vegas Posts: 313 Drives: Q50/G37 Rep Power: 13	thats is correct..the Berk HFC will not work untill they change the flange type

07-25-2013, 01:58 PM	#255 (permalink)
KB2 Base Member Join Date: Apr 2010 Location: Illinois Posts: 243 Drives: 370z Rep Power: 15	Alright thanks. Just wanted to be totally clear on that. now,im not a master with headers...but wouldnt it still be better to just get long tube headers? Or are these just that much better?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
AMS Headers	SPOHN	Intake/Exhaust	24	12-20-2012 01:16 AM
Install Video/Sound Clip: FI headers/cat-back/HFC...yes headers AND HFC.	M.Bonanni	Intake/Exhaust	30	08-07-2012 11:07 AM
[WTB] Headers	Dwv2005	Parts for sale (Private Classifieds)	3	02-29-2012 08:17 PM
headers	Ricardo2.0	Wanted	0	01-24-2012 01:37 AM
Headers	Paladinjc	Intake/Exhaust	12	04-08-2011 06:36 PM