Hey Z1. ETA on those headers?

SPOHN · 04-03-2013, 03:28 PM

Quote:

Originally Posted by Sh0velMan

Man shorties must be way way easier.

We had three people doing the longtubes, didn't change much. It's a long and grueling task that you have to take very slowly if you don't want to muck everything up.

I assume. Only thing I know about the LTH is the extended O2 that takes time. But shorties are just bolt up and attach test pipes. No clearance issues. Mmmmm. Now that I picture it i can see how bolting up the LT would be a pain. Especially the bottom bolts and bolts in the rear being the pipes are long and most likely in the way.

Sh0velMan · 04-03-2013, 03:38 PM

Quote:

Originally Posted by SPOHN

I assume. Only thing I know about the LTH is the extended O2 that takes time. But shorties are just bolt up and attach test pipes. No clearance issues. Mmmmm. Now that I picture it i can see how bolting up the LT would be a pain. Especially the bottom bolts and bolts in the rear being the pipes are long and most likely in the way.

Exactly.

Add in to it that they're ceramic coated and you're warned over and over to touch the coating as little as possible and to even try to install it while it's inside a damned plastic bag... Yeah.

And I actually have to take mine off so I can wrap them and put them back on to get my under hood temps under control.

Going to be awful, since I don't have a lift this time.

MJB · 04-03-2013, 06:30 PM

Z1 just posted up dyno results of a 350z Nismo with the soon to be released Z1 headers and full bolt ons making 322WHP.... pretty impressive.

Tomei Z33 ExPreme TI Catback Exhaust @ Z1 Motorsports - YouTube

Yutnaka · 04-03-2013, 10:25 PM

Quote:

Originally Posted by MJB

Z1 just posted up dyno results of a 350z Nismo with the soon to be released Z1 headers and full bolt ons making 322WHP.... pretty impressive.

Tomei Z33 ExPreme TI Catback Exhaust @ Z1 Motorsports - YouTube

I saw that today on Zatlanta...it's ridiculous how Z1 is able make that much power. I cant wait for the headers and some other non-engine work that might give us more power.

AlexRaymond19 · 04-04-2013, 06:24 AM

Results as promised

Wonka2581 · 04-04-2013, 07:08 AM

Any dates yet?

ZBro16 · 04-04-2013, 02:40 PM

Where is Tomei on the 370Z stuff anyway? I like that exhaust on the 350. /threadjack

MD-370z · 04-20-2013, 03:57 PM

any updates?

Z_Enthusiast · 04-21-2013, 01:06 PM

I've got money burning a hole in my pocket!
I'm trying to hold out for these....

diddy535 · 04-21-2013, 01:15 PM

Quote:

Originally Posted by ZBro16

Where is Tomei on the 370Z stuff anyway? I like that exhaust on the 350. /threadjack

I wonder of the 350 headers would be good on the 370.. The momentums were for the 350 after all...

Jus · 04-23-2013, 11:22 AM

With the amount of ppl interested in these headers, Z1 should have a group buy for when they're released

SPOHN · 04-23-2013, 11:53 AM

Quote:

Originally Posted by diddy535

I wonder of the 350 headers would be good on the 370.. The momentums were for the 350 after all...

Not understanding? The Momentum headers from the 350 work on our 370. That's current what I'm running. And the numbers are just as great. That's what this whole thread is originally about. Plus I heard the Z1 headers will be out soon enough. So there coming. You guys have to understand business along with finding a good manufacture to work with to help Z1 produce such a great product. This mod just blew up overnight with short supply. Just know Z1 will provide a great product that's trouble free.

Sh0velMan · 04-23-2013, 12:22 PM

Quote:

Originally Posted by SPOHN

Not understanding? The Momentum headers from the 350 work on our 370. That's current what I'm running. And the numbers are just as great. That's what this whole thread is originally about. Plus I heard the Z1 headers will be out soon enough. So there coming. You guys have to understand business along with finding a good manufacture to work with to help Z1 produce such a great product. This mod just blew up overnight with short supply. Just know Z1 will provide a great product that's trouble free.

I think he meant to say "I wonder if other 350 headers would work".

To that point, I think the Momentums were very oversized for the engine they were originally designed for, and have a very nice collector design, so I'd be pretty surprised if other 35DE headers get any gains. A lot of them will absolutely fit (I tested some DE long tubes, fit fine with only minor adjustment to a heat shield needed), but they were awful, performance wise.

diddy535 · 04-23-2013, 05:58 PM

Quote:

Originally Posted by Sh0velMan

I think he meant to say "I wonder if other 350 headers would work".

To that point, I think the Momentums were very oversized for the engine they were originally designed for, and have a very nice collector design, so I'd be pretty surprised if other 35DE headers get any gains. A lot of them will absolutely fit (I tested some DE long tubes, fit fine with only minor adjustment to a heat shield needed), but they were awful, performance wise.

That is what I meant to say thanks for clarifying - type like crap on these smartphones. Was curious if other 350 headers could work but you answered that too, much appreciated!

AlexRaymond19 · 04-24-2013, 06:17 AM

Quote:

Originally Posted by Sh0velMan

I think he meant to say "I wonder if other 350 headers would work".

To that point, I think the Momentums were very oversized for the engine they were originally designed for, and have a very nice collector design, so I'd be pretty surprised if other 35DE headers get any gains. A lot of them will absolutely fit (I tested some DE long tubes, fit fine with only minor adjustment to a heat shield needed), but they were awful, performance wise.

I don't think they are very oversized. They were designed specifically for use in their turbo kit. But you are right, with no turbo they are pretty large

04-03-2013, 06:30 PM	#48 (permalink)
MJB A True Z Fanatic Join Date: Aug 2011 Location: Tacoma, WA Age: 41 Posts: 1,498 Drives: a POS truck Rep Power: 496	Z1 just posted up dyno results of a 350z Nismo with the soon to be released Z1 headers and full bolt ons making 322WHP.... pretty impressive. Tomei Z33 ExPreme TI Catback Exhaust @ Z1 Motorsports - YouTube 2sl0w likes this. __________________ 09 Nismo #0483 sold. Viper or C7 next time around.

04-04-2013, 06:24 AM	#50 (permalink)
AlexRaymond19 Track Member Join Date: Jun 2011 Location: Maine Posts: 771 Drives: 2010 Nissan 370z Rep Power: 15	Results as promised __________________ 2010 370Z Touring MT \| Stillen \| Motordyne \| Momentum\| Z1 \| Fast Intentions \| Advant Garde \| RE11 \| Swift \| SPC \| Quaife \| Whiteline \| Evo R \| 322RWHP 259ft-lb Mustang

04-04-2013, 07:08 AM	#51 (permalink)
Wonka2581 A True Z Fanatic Join Date: Nov 2012 Location: Chattanooga, TN Posts: 3,083 Drives: MY WIFE CRAZY.... Rep Power: 2612	Any dates yet? Z_Enthusiast likes this. __________________ "I have nothing to offer but blood, toil, tears and sweat""Winston Churchill"

04-04-2013, 02:40 PM	#52 (permalink)
ZBro16 Enthusiast Member Join Date: Nov 2011 Location: Huntsville, AL Posts: 370 Drives: A Z. Rep Power: 14	Where is Tomei on the 370Z stuff anyway? I like that exhaust on the 350. /threadjack edub370 likes this.

04-20-2013, 03:57 PM	#53 (permalink)
MD-370z Base Member Join Date: Apr 2009 Location: canada Posts: 137 Drives: 370z,MB, sport, m6, Rep Power: 16	any updates? Z_Enthusiast likes this.

04-21-2013, 01:06 PM	#54 (permalink)
Z_Enthusiast Base Member Join Date: Nov 2012 Location: Memphis, TN Posts: 49 Drives: 09' 370Z Silver 6MT Rep Power: 13	I've got money burning a hole in my pocket! I'm trying to hold out for these....

04-23-2013, 11:22 AM	#56 (permalink)
Jus Base Member Join Date: Oct 2012 Location: Canada Posts: 188 Drives: 40th 370z Rep Power: 13	With the amount of ppl interested in these headers, Z1 should have a group buy for when they're released

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
AMS Headers	SPOHN	Intake/Exhaust	24	12-20-2012 01:16 AM
Install Video/Sound Clip: FI headers/cat-back/HFC...yes headers AND HFC.	M.Bonanni	Intake/Exhaust	30	08-07-2012 11:07 AM
[WTB] Headers	Dwv2005	Parts for sale (Private Classifieds)	3	02-29-2012 08:17 PM
headers	Ricardo2.0	Wanted	0	01-24-2012 01:37 AM
Headers	Paladinjc	Intake/Exhaust	12	04-08-2011 06:36 PM