Hey Z1. ETA on those headers?

FL 4Motion · 07-13-2013, 05:11 PM

Quote:

Originally Posted by DEpointfive0

This "trick" is killing me!!!
Are they just drilling holes out? Wtf?!?!?! Z1, we need your answer ASAP

/\ lolz, me too, can't wait to find out.

boxes arrived today, sitting in my foyer.

PS--I ran the FI lth and non res carbon fiber muffler cbe on the last nismo. I am getting old now cause the smell drove me insane even after the tune helped a bit. My old chevelle never bothered me but that was a long time ago. HFC eliminate this and are less bad for the environment win/win.

SS_Firehawk · 07-13-2013, 05:46 PM

Quote:

Originally Posted by FL 4Motion

/\ lolz, me too, can't wait to find out.

boxes arrived today, sitting in my foyer.

PS--I ran the FI lth and non res carbon fiber muffler cbe on the last nismo. I am getting old now cause the smell drove me insane even after the tune helped a bit. My old chevelle never bothered me but that was a long time ago. HFC eliminate this and are less bad for the environment win/win.

Love having my MD Y pipe n HFC for that reason

I keep long tubes and a HFC. Only downside is no "true dual" exhaust or x pipe.

Chuck33079 · 07-13-2013, 05:54 PM

Quote:

Originally Posted by SS_Firehawk

Love having my MD Y pipe n HFC for that reason

I keep long tubes and a HFC. Only downside is no "true dual" exhaust or x pipe.

Is that going to be enough flow once the superchargers are installed?

SS_Firehawk · 07-13-2013, 06:16 PM

Quote:

Originally Posted by Chuck33079

Is that going to be enough flow once the superchargers are installed?

Not 100% sure yet. The Tanabe portion actually goes down to 2.75". I do know these superchargers like a bit of back pressure to get into it's efficiency range, but I'm a bit worried about the top end restriction. If need be, I will either swap the whole thing for F.I. with the small cats or maybe just the mid back section. Idk how much these Y pipes can flow.

Chuck33079 · 07-13-2013, 06:20 PM

The Y is the part I think would be the issue. Oh well. There's always something that needs to be changed out or upgraded.

DEpointfive0 · 07-13-2013, 08:36 PM

Quote:

Originally Posted by SS_Firehawk

Not 100% sure yet. The Tanabe portion actually goes down to 2.75". I do know these superchargers like a bit of back pressure to get into it's efficiency range, but I'm a bit worried about the top end restriction. If need be, I will either swap the whole thing for F.I. with the small cats or maybe just the mid back section. Idk how much these Y pipes can flow.

I don't think S/Cs need any back pressure. They aren't turbos...

It'll probably be best to go catless and live in the 50's

SS_Firehawk · 07-13-2013, 10:04 PM

Quote:

Originally Posted by DEpointfive0

I don't think S/Cs need any back pressure. They aren't turbos...

It'll probably be best to go catless and live in the 50's

turbo's hate backpressure more. GTM was telling me the info about the SC's, but thats also speculation as well from prior experience. I just want moar

lol

MM'08_350Z · 07-13-2013, 11:26 PM

For those of you who are also going to recieve the Z1 headers on your tracking info does it say the package weights 10lbs?

brucelidat · 07-13-2013, 11:48 PM

All for you who are getting these, post some DYNOS!!

MM'08_350Z · 07-14-2013, 10:20 AM

Yes!!! DYNO!!!! Mine is going to be a bit harder to surpass but ill hope for better than my 322whp and 267wtq. BTW it's harder for me since I'm not driving a 370Z I have an 08 350Z. Other mods I'm doing to my Z are going to consist of bored out throttle bodies(2.5mm) NST pullies, Z1 Headers, and Z1 TPs on my next dyno tune.

Quote:

Originally Posted by brucelidat

All for you who are getting these, post some DYNOS!!

LukasC · 07-14-2013, 11:58 AM

Nice numbers! What's your power mods before the dyno?

MM'08_350Z · 07-14-2013, 12:12 PM

Quote:

Originally Posted by LukasC

Nice numbers! What's your power mods before the dyno?

Mods on the car on that day were stillen G3 intakes, Okada plasma coil packs, ID725cc injectors, Stillen headers, Art Pipes, Motordyne TDX V2 exhaust and Greddy 267/264 Camshafts.

Oh!! And I still want to know about Z1s intake Manifold mod!!!!

LukasC · 07-14-2013, 01:43 PM

Quote:

Originally Posted by MM'08_350Z

Mods on the car on that day were stillen G3 intakes, Okada plasma coil packs, ID725cc injectors, Stillen headers, Art Pipes, Motordyne TDX V2 exhaust and Greddy 267/264 Camshafts.

Oh!! And I still want to know about Z1s intake Manifold mod!!!!

Damn that's a lot of mods. Wait a sec ur in a 350 lol and u live in San Antonio? How come you don't go to Zsport? Here's my dyno from JMS this is with stillen g3 intakes motordyne art pipes UPREV tune and fast intentions TDX 18" resonators with carbon fiber mufflers. Before and after I got my art pipes. ImageUploadedByTapatalk1373823760.155285.jpgtop line is after the art pipes obviously. So when I get headers people can see the difference then.

MM'08_350Z · 07-14-2013, 05:15 PM

Those are some good numbers!

what is ZSport?

Quote:

Originally Posted by LukasC

Damn that's a lot of mods. Wait a sec ur in a 350 lol and u live in San Antonio? How come you don't go to Zsport? Here's my dyno from JMS this is with stillen g3 intakes motordyne art pipes UPREV tune and fast intentions TDX 18" resonators with carbon fiber mufflers. Before and after I got my art pipes. Attachment 72889top line is after the art pipes obviously. So when I get headers people can see the difference then.

Mike · 07-14-2013, 07:31 PM

Quote:

Originally Posted by MM'08_350Z

For those of you who are also going to recieve the Z1 headers on your tracking info does it say the package weights 10lbs?

wouldn't surprise me, I think they told me they cut 36 lbs compared to my stock headers.

07-13-2013, 06:20 PM	#215 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	The Y is the part I think would be the issue. Oh well. There's always something that needs to be changed out or upgraded. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

07-13-2013, 11:48 PM	#219 (permalink)
brucelidat A True Z Fanatic Join Date: Jun 2011 Location: temple city, ca Posts: 2,432 Drives: 2011 370z 7AT GM Sp Rep Power: 31	All for you who are getting these, post some DYNOS!! __________________ Works Emotion CR Ultimate - FI CBE w/ 18" resonators - Ecutek - eibach sways - Quaife - FI LTH w/race cats - kw v3 - spl - Topgunz SC - 488whp 398trq

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
AMS Headers	SPOHN	Intake/Exhaust	24	12-20-2012 01:16 AM
Install Video/Sound Clip: FI headers/cat-back/HFC...yes headers AND HFC.	M.Bonanni	Intake/Exhaust	30	08-07-2012 11:07 AM
[WTB] Headers	Dwv2005	Parts for sale (Private Classifieds)	3	02-29-2012 08:17 PM
headers	Ricardo2.0	Wanted	0	01-24-2012 01:37 AM
Headers	Paladinjc	Intake/Exhaust	12	04-08-2011 06:36 PM

07-13-2013, 11:26 PM	#218 (permalink)
MM'08_350Z Base Member Join Date: Jun 2013 Location: Laredo Posts: 36 Drives: 08 350Z CS M6 Rep Power: 12	For those of you who are also going to recieve the Z1 headers on your tracking info does it say the package weights 10lbs?

07-14-2013, 11:58 AM	#221 (permalink)
LukasC Track Member Join Date: Apr 2011 Location: San Antonio, Tx Posts: 664 Drives: 11 Stillen SC Bl M6 Rep Power: 17	Nice numbers! What's your power mods before the dyno?