Stock cat?

Chuck33079 · 01-25-2013, 09:26 AM

I knocked out the cat on an uppipe for a Subaru I had. Worked fine. I don't see why you would have any issues. Personally, I'd get a long screwdriver or a piece of rebar and hammer it out rather than using fire. It may be easier to get a long drill bit and poke some holes in the cat material to make it break up easier. Make sure you get it all. Wear a mask. The dust is nasty stuff, and you don't want it in your lungs.

Sh0velMan · 01-25-2013, 10:54 AM

This thread makes me grin.

Many years ago I gutted the pre-cats on my VR-4. With them on the car.

I got under the car, used a half inch auger bit and a power drill. Drill drill drill, yank some crap out with long needle nose pliers, drill drill drill.

I was washing catalytic converter out of my hair and skin for days.

I wouldn't recommend that method to anyone ever hahaha.

Chuck33079 · 01-25-2013, 11:01 AM

Quote:

Originally Posted by Sh0velMan

This thread makes me grin.

Many years ago I gutted the pre-cats on my VR-4. With them on the car.

I got under the car, used a half inch auger bit and a power drill. Drill drill drill, yank some crap out with long needle nose pliers, drill drill drill.

I was washing catalytic converter out of my hair and skin for days.

I wouldn't recommend that method to anyone ever hahaha.

Wow. Doing it on the car is pretty ballsy.

Sh0velMan · 01-25-2013, 11:03 AM

Quote:

Originally Posted by Chuck33079

Wow. Doing it on the car is pretty ballsy.

They were completely rusted to the turbine flanges. I'd have to take the turbos off of the car, probably the manifolds themselves, to get them off of the car to get the bolts drilled out and blah blah blah.

I'd just done a clutch job on the damn thing that took me 3 days of hard labor to get done. I couldn't afford labor anywhere else and I knew I'd probably never get the turbos out without professional intervention.

That car was a real bitch to work on. Traverse mounted twin turbo V6's FTMFL.

Sh0velMan · 01-25-2013, 11:04 AM

Also, you should have seen the cloud that came out of the car when we started it up afterwards. Was pretty awesome.

By the time I was done, the cat housings were completely empty. Spool was much better, sound was ridiculous. (Already had a test pipe in place for the main cat, and the Borla exhaust I had was ridiculously loud)

Chuck33079 · 01-25-2013, 11:08 AM

Quote:

Originally Posted by Sh0velMan

That car was a real bitch to work on.

You're a braver soul than I to have owned a VR4. A buddy of mine had one that ran really well. When it ran.

Sh0velMan · 01-25-2013, 11:09 AM

Ain't that the truth!

I had a gen 1.5, meaning a 1993.

5 Speed super long geared tranny, forged everything in the engine (as opposed to the 91-92's with cast stuff) but still had the shitty aluminum transfer case.

I ended up cracking the transmission housing @ the transfer case. Instead of snapping the T/C like everyone else did, it cracked the transmission's case, spilling gear oil everywhere.

Then I sold it.

Chuck33079 · 01-25-2013, 11:18 AM

Quote:

Originally Posted by Sh0velMan

Then I sold it.

The happiest day of any Mitsubishi owner's life.

Mike · 01-25-2013, 08:41 PM

oh yeah, wear a respirator, or at the very least a dust mask. There are some pretty nasty heavy metals in there.

Sh0velMan · 01-25-2013, 08:43 PM

Quote:

Originally Posted by Mike

oh yeah, wear a respirator, or at the very least a dust mask. There are some pretty nasty heavy metals in there.

Quote for truth.

L33T Z34 · 07-24-2013, 03:55 AM

Quote:

Originally Posted by AlexRaymond19

Does anyone know what the smallest diameter inside the stock cats? I was wondering if the old soak them in kerosene and light them on fire until the insides crumble and fall out to make better flow would work? Just a thought...

LOL!

Did you try this? It might work if it got hot enough?? I know the red nek way around here is to remove 'em and take an acetylene torch to 'em. -Bonus points if you do it under the car w/'em still attached! Guts 'em really fast!

DEpointfive0 · 07-24-2013, 03:57 AM

Quote:

Originally Posted by L33T Z34

LOL!

Did you try this? It might work if it got hot enough?? I know the red nek way around here is to remove 'em and take an acetylene torch to 'em. -Bonus points if you do it under the car w/'em still attached! Guts 'em really fast!

No, a did long tube headers

01-25-2013, 09:26 AM	#16 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	I knocked out the cat on an uppipe for a Subaru I had. Worked fine. I don't see why you would have any issues. Personally, I'd get a long screwdriver or a piece of rebar and hammer it out rather than using fire. It may be easier to get a long drill bit and poke some holes in the cat material to make it break up easier. Make sure you get it all. Wear a mask. The dust is nasty stuff, and you don't want it in your lungs. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

01-25-2013, 10:54 AM	#17 (permalink)
Sh0velMan A True Z Fanatic Join Date: Jan 2012 Location: Dallas/Ft.Worth Posts: 3,349 Drives: Noisily. Rep Power: 20	This thread makes me grin. Many years ago I gutted the pre-cats on my VR-4. With them on the car. I got under the car, used a half inch auger bit and a power drill. Drill drill drill, yank some crap out with long needle nose pliers, drill drill drill. I was washing catalytic converter out of my hair and skin for days. I wouldn't recommend that method to anyone ever hahaha. __________________ Buy My Car! \| Build Thread

01-25-2013, 11:04 AM	#20 (permalink)
Sh0velMan A True Z Fanatic Join Date: Jan 2012 Location: Dallas/Ft.Worth Posts: 3,349 Drives: Noisily. Rep Power: 20	Also, you should have seen the cloud that came out of the car when we started it up afterwards. Was pretty awesome. By the time I was done, the cat housings were completely empty. Spool was much better, sound was ridiculous. (Already had a test pipe in place for the main cat, and the Borla exhaust I had was ridiculously loud) __________________ Buy My Car! \| Build Thread

01-25-2013, 11:09 AM	#22 (permalink)
Sh0velMan A True Z Fanatic Join Date: Jan 2012 Location: Dallas/Ft.Worth Posts: 3,349 Drives: Noisily. Rep Power: 20	Ain't that the truth! I had a gen 1.5, meaning a 1993. 5 Speed super long geared tranny, forged everything in the engine (as opposed to the 91-92's with cast stuff) but still had the shitty aluminum transfer case. I ended up cracking the transmission housing @ the transfer case. Instead of snapping the T/C like everyone else did, it cracked the transmission's case, spilling gear oil everywhere. Then I sold it. __________________ Buy My Car! \| Build Thread

01-25-2013, 08:41 PM	#24 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2186	oh yeah, wear a respirator, or at the very least a dust mask. There are some pretty nasty heavy metals in there. __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] FS SOCAL New Sports package wheels, stock exhaust, and other stock parts	FairladyZ	Parts for sale (Private Classifieds)	3	05-19-2012 09:26 PM
[WTB] WTT SoCAL: CF Spoiler for Stock SILVER & Front Bumper w/ Lip and Stash for Stock	Juan@AEperformance	Parts for sale (Private Classifieds)	6	01-10-2012 02:32 PM
Can i change my stock HID bulb on my 370z to a 6000k and keep the stock ballast?	MyYellow370z	DIY Section (Do-It-Yourself)	2	06-14-2011 11:47 PM
Swap TPMS from stock 18's to stock 19" Rays	CAN-ZED	Wheels & Tires	12	03-29-2011 08:58 AM
SSR PROFESSOR MS1 2 IN STOCK, TYPE F 3 COLORS IN STOCK from AMPLIFIED MOTORSPORT	LOU@AMPLIFIED	Tires/Wheels	33	12-04-2009 07:35 PM