New 370Z, time for intake/exhaust

edub370 · 01-16-2013, 05:30 PM

Quote:

Originally Posted by Gibby1113

And I also recommend the motordyne intake manifold, I've heard great things about it and that it makes the intake sound better.

ftfy

EZT · 01-16-2013, 05:43 PM

R2C intakes are a good choice if you don't want to remove the bumper.

Dan@RAD · 01-16-2013, 06:26 PM

Congrats on the car! Exhaust is very much a personal preference since everyone has a different opinion of what sounds good. What are your plans with the car? If you plan on going forced induction down the road, then I would plan for the proper size exhaust now so you don't have to do it again.

As far as intakes, we usually recommend the Injen intakes as we have found that they perform extremely well. And if you don't feel like ripping the front bumper off, you're more than welcome to drive up and we'll do it for you.

red6spd · 01-16-2013, 09:59 PM

Quote:

Originally Posted by Gibby1113

The F.I. Cbe is awesome and for the cai I recommend the k&n. You won't have to remove the bumper to clean it. And I also recommend the motordyne intake manifold, I've heard great things about it and that it makes the exhaust sound better. Hope you enjoy the Z!

KandN makes a CAI for the 370?

Romulus1 · 01-16-2013, 10:26 PM

I was thinking the same thing about K&N!

Worth the drive to RAD. Great people there

Gibby1113 · 01-16-2013, 10:50 PM

Quote:

Originally Posted by red6spd

KandN makes a CAI for the 370?

They sure do. I'm getting them on my Z soon.

sparky · 01-18-2013, 12:36 AM

I have the K and N HAI and FI exhaust and I like it, heat soak be dammed.

red6spd · 01-18-2013, 08:18 AM

Quote:

Originally Posted by Gibby1113

They sure do. I'm getting them on my Z soon.

LOL. They can call that a CAI as much as they want but its not. A CAI is a intake the positions its filters outside the engine bay not blocks the heat with some plastic.

sparky · 01-18-2013, 11:31 PM

Quote:

Originally Posted by red6spd

LOL. They can call that a CAI as much as they want but its not. A CAI is a intake the positions its filters outside the engine bay not blocks the heat with some plastic.

Hence my acronym HAI.

Romulus1 · 01-19-2013, 07:29 PM

Quote:

Originally Posted by sparky

Hence my acronym HAI.

I see what you did there

roy'sz · 01-19-2013, 08:47 PM

Believe it or not when it is 81 outside my stock air inlet temp is 84. How would that change with the stillen gen 3 compared to jwt or k and n? Aldo we have coolant hoses hooked up to the throttle body which increases the air temp.

red6spd · 01-20-2013, 12:25 PM

Quote:

Originally Posted by sparky

Hence my acronym HAI.

My comment was not towards you.

red6spd · 01-20-2013, 12:26 PM

Quote:

Originally Posted by roy'sz

Believe it or not when it is 81 outside my stock air inlet temp is 84. How would that change with the stillen gen 3 compared to jwt or k and n? Aldo we have coolant hoses hooked up to the throttle body which increases the air temp.

It would change because you would know be sucking in air heat soaked from the engine. You have drop in filters that are sealed int a plastic housing which is why you probably see those temps.

01-16-2013, 06:26 PM	#18 (permalink)
Dan@RAD Base Member Join Date: Jul 2012 Location: Queens, NY Posts: 43 Drives: 99 VW Cabrio VR6 Rep Power: 13	Congrats on the car! Exhaust is very much a personal preference since everyone has a different opinion of what sounds good. What are your plans with the car? If you plan on going forced induction down the road, then I would plan for the proper size exhaust now so you don't have to do it again. As far as intakes, we usually recommend the Injen intakes as we have found that they perform extremely well. And if you don't feel like ripping the front bumper off, you're more than welcome to drive up and we'll do it for you. __________________ http://i48.tinypic.com/2h6t15w.jpg Real Auto Dynamics 516.442.7155 \| dan@realautodynamics.com www.facebook.com/RealAutoDynamics

01-16-2013, 10:26 PM	#20 (permalink)
Romulus1 Track Member Join Date: May 2011 Location: Long Island, NY Posts: 691 Drives: '11 370Z Sport 6MT Rep Power: 15	I was thinking the same thing about K&N! Worth the drive to RAD. Great people there __________________ 11 SR 370Z Sport 6MT - Sold 03 Escalade AWD - Sold 13 Silverado LTZ Z71 Crew Cab

01-18-2013, 12:36 AM	#22 (permalink)
sparky Track Member Join Date: Jul 2011 Location: Vancouver, BC Posts: 642 Drives: 12 370Z GM AT Rep Power: 15	I have the K and N HAI and FI exhaust and I like it, heat soak be dammed. __________________ 2012 370Z GM 7AT/JWM LEDs / 3M clear bra / 35% tint / GTR start button / FI CBE SS 18" RES / Momo shift knob / K & N Typhoon / Z1 hood struts / H&R 20mm f/r / illuminated kickplates

01-19-2013, 08:47 PM	#26 (permalink)
roy'sz A True Z Fanatic Join Date: Aug 2011 Location: palmdale, ca Posts: 1,299 Drives: 2010 nissan 370z Rep Power: 16	Believe it or not when it is 81 outside my stock air inlet temp is 84. How would that change with the stillen gen 3 compared to jwt or k and n? Aldo we have coolant hoses hooked up to the throttle body which increases the air temp. __________________ https://www.youtube.com/watch?v=RtvG...data_playerARK HFC'S-ARK Grip-Stillen G3-M370-UPREV-Kinetix upper control arm-WC Latheworks-Stage2 Bad@$$ Driver(318whp/268tq)-

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
370Z exhaust / air intake search	stump118	Intake/Exhaust	5	03-27-2012 09:59 AM
2010-2012 370Z AEM intake and AEM exhaust	KenAEM	Intake/Exhaust	3	08-10-2011 09:20 PM
which exhaust System and intake is best for 370Z	Dre22	Intake/Exhaust	30	04-15-2011 06:32 PM
370Z AEM cold air intake and Exhaust	KenAEM	Engine & Drivetrain	6	10-09-2009 11:51 PM

01-16-2013, 05:43 PM	#17 (permalink)
EZT Track Member Join Date: Mar 2011 Location: Gainesville Posts: 546 Drives: 09 370z Rep Power: 315	R2C intakes are a good choice if you don't want to remove the bumper.