Intake Air Temperatures

Modshack · 04-02-2010, 07:17 PM

Quote:

Originally Posted by KEVTEX

This morning when the car was first started, after sitting all night, the IAT was 5 degrees higher than the ambient reading. I would like to know if others have noticed this same temperature difference upon startup or whether my sensors are out of calibration by 5 degrees. One would expect the temperatures would have stabilized overnight to the point where they read the same.

They do not match exactly...

Modshack · 04-02-2010, 07:31 PM

Quote:

Originally Posted by JvKintheUSA

No, this one. This is the view from underneath the car looking to the left. The bright spot is the fang opening and the flap can be seen to the left of it (if you click the image you can vaguely see the inscription "ET" on it).

Still not understanding what you mean here...That's just the side of the bumper molding...
Here's a shot with the bumper off and one of my hose flanges mounted over the fang opening..

ZPirate · 04-04-2010, 01:26 PM

Steve and I installed my Modshack custom intakes today. Steve was able to powdercoat the intake cans to match PG. They turned out great! Steve was also able to machine the MAF tubes out of aluminum. Those turned out nice too. And the Cobb intake tubes look much cleaner than stock. They fit perfectly as well.

I still need to install my painted engine covers to match the Modshack custom intakes. I'll try to install them, take some pictures and post them up later.

Aluminum MAF Holder with OEM MAF installed

Intake Installation

Driver's side

Passenger side

Full intake without strut bar reinstalled

With strut bar reinstalled

Zsteve · 04-04-2010, 01:33 PM

can you feel any gains? Modshack if your MAF is to lean out the car, would I see any gains from it since I have the Cobb tune? Also would the cobb tube and your MAF fit with stock boxes?

ZPirate · 04-04-2010, 01:42 PM

Quote:

Originally Posted by Zsteve

can you feel any gains? Modshack if your MAF is to lean out the car, would I see any gains from it since I have the Cobb tune? Also would the cobb tube and your MAF fit with stock boxes?

I haven't really had a chance to go out and drive the car yet. I basically just drove home from Modshacks. The car runs great though with the intakes and they make a nice sound when you get on it.

BTW the Cobb tubes will fit on the car with the OEM MAF and intake boxes. They basically replace the OEM hoses between the MAF and the throttle body.

ZforMe · 04-04-2010, 01:59 PM

Looks Great!

Modshack, any plans to make a kit to sell to fellow forum members? I may be interested in your Maf's and intake cans (black would be my color preference)?

Thanks,

ZPirate · 04-04-2010, 02:11 PM

Quote:

Originally Posted by ZforMe

Looks Great!

Modshack, any plans to make a kit to sell to fellow forum members? I may be interested in your Maf's and intake cans (black would be my color preference)?

Thanks,

Thanks! I'm really happy with the way it turned out.

ZPirate · 04-04-2010, 04:51 PM

Here are some pictures of the intakes with my painted engine covers and ZeeToyz engine caps.

theDreamer · 04-04-2010, 04:53 PM

Where did you get those Z caps?

ZPirate · 04-04-2010, 05:01 PM

ZeeToyz. They just came out with the 370Z caps. I have the 350Z caps on my 350Z. Call and ask for Terry if you are interested. They have them in red, blue and chrome.

Zeetoyz Inc. - Nissan 350Z, Ring Kits, Engines, Cold Air Intake

96bigbody · 04-04-2010, 06:00 PM

Quote:

Originally Posted by ZforMe

Looks Great!

Modshack, any plans to make a kit to sell to fellow forum members? I may be interested in your Maf's and intake cans (black would be my color preference)?

Thanks,

You can already buy air boxes for filters and maf's too.

ZforMe · 04-04-2010, 06:16 PM

Do you have a link to the website?

Modshack · 04-04-2010, 06:31 PM

Quote:

Originally Posted by ZPirate

Here are some pictures of the intakes with my painted engine covers and ZeeToyz engine caps.

Wow...That all came together nice John!

Modshack · 04-04-2010, 06:38 PM

Quote:

Originally Posted by ZforMe

Looks Great!

Modshack, any plans to make a kit to sell to fellow forum members?

LOL...Funny, John (Zpirate) and I discussed this earlier today!
Unlikely that I will for the following reasons:

1) I am not a vendor here and doubt the revenue I could generate from the various things I could design/build would make that financially feasible .

2) I am not real confident in the general mechanical skills of the members here. This set-up took a lot of hands on and slight modifications to turn out like you see it.

3) It would not be affordable. If I were to charge what I generally do for this work it would be too expensive. I could cut my margins, but I'm not interested in working for peanuts, in addition to supporting the inevitable issues that can/will arise.

4) This crowd is Dyno driven. My designs are more to improve day to day driveablilty. A few more horsepower at 7K RPM's is not what I'm looking for, but it seems most here are.

Zpirate is a local friend. I do his airboxes, he does my wills.......:-)

ZPirate · 04-04-2010, 09:34 PM

Quote:

Originally Posted by Modshack

Wow...That all came together nice John!

It sure did Steve.

I hadn't even tried the engine covers until today.

04-04-2010, 01:26 PM	#48 (permalink)
ZPirate Track Member Join Date: Dec 2008 Location: Greenville, NC Posts: 792 Drives: 09' 370Z & 03' 350Z Rep Power: 17	Steve and I installed my Modshack custom intakes today. Steve was able to powdercoat the intake cans to match PG. They turned out great! Steve was also able to machine the MAF tubes out of aluminum. Those turned out nice too. And the Cobb intake tubes look much cleaner than stock. They fit perfectly as well. I still need to install my painted engine covers to match the Modshack custom intakes. I'll try to install them, take some pictures and post them up later. Aluminum MAF Holder with OEM MAF installed Intake Installation Driver's side Passenger side Full intake without strut bar reinstalled With strut bar reinstalled __________________ 2003 Daytona Blue 350Z Touring/Nismo 2009 Platinum Graphite 370Z Touring/Sport (Sold) 2009 BMW 135i/Dinan Stage 2 software upgrade/M3 suspension piecies/Koni Sports/ETS FMIC/Alufelgen SF-71 wheels Last edited by ZPirate; 04-04-2010 at 01:29 PM.

04-04-2010, 01:33 PM	#49 (permalink)
Zsteve A True Z Fanatic Join Date: Sep 2009 Location: TX Posts: 3,298 Drives: the 2 balled club Rep Power: 22	can you feel any gains? Modshack if your MAF is to lean out the car, would I see any gains from it since I have the Cobb tune? Also would the cobb tube and your MAF fit with stock boxes? __________________ 2010 LS3 C6 Silver coupe corvette

04-04-2010, 01:59 PM	#51 (permalink)
ZforMe Base Member Join Date: Jan 2009 Location: Memphis TN Posts: 238 Drives: 370Z Sport Auto PG Rep Power: 16	Looks Great! Modshack, any plans to make a kit to sell to fellow forum members? I may be interested in your Maf's and intake cans (black would be my color preference)? Thanks, __________________ 13.369 @ 102.73 Bone Stock. BERK HFC's installed 5/14/09 @ 1490miles, 13.212 @ 106.15. Cobb Post MAF Hoses installed 3/20/10 @ 5,043miles, future: FI exhaust with 18" res and s/s cans.

04-04-2010, 04:51 PM	#53 (permalink)
ZPirate Track Member Join Date: Dec 2008 Location: Greenville, NC Posts: 792 Drives: 09' 370Z & 03' 350Z Rep Power: 17	Here are some pictures of the intakes with my painted engine covers and ZeeToyz engine caps. __________________ 2003 Daytona Blue 350Z Touring/Nismo 2009 Platinum Graphite 370Z Touring/Sport (Sold) 2009 BMW 135i/Dinan Stage 2 software upgrade/M3 suspension piecies/Koni Sports/ETS FMIC/Alufelgen SF-71 wheels Last edited by ZPirate; 04-04-2010 at 04:53 PM.

04-04-2010, 04:53 PM	#54 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4210	Where did you get those Z caps? __________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram

04-04-2010, 05:01 PM	#55 (permalink)
ZPirate Track Member Join Date: Dec 2008 Location: Greenville, NC Posts: 792 Drives: 09' 370Z & 03' 350Z Rep Power: 17	ZeeToyz. They just came out with the 370Z caps. I have the 350Z caps on my 350Z. Call and ask for Terry if you are interested. They have them in red, blue and chrome. Zeetoyz Inc. - Nissan 350Z, Ring Kits, Engines, Cold Air Intake __________________ 2003 Daytona Blue 350Z Touring/Nismo 2009 Platinum Graphite 370Z Touring/Sport (Sold) 2009 BMW 135i/Dinan Stage 2 software upgrade/M3 suspension piecies/Koni Sports/ETS FMIC/Alufelgen SF-71 wheels

04-04-2010, 06:16 PM	#57 (permalink)
ZforMe Base Member Join Date: Jan 2009 Location: Memphis TN Posts: 238 Drives: 370Z Sport Auto PG Rep Power: 16	Do you have a link to the website? __________________ 13.369 @ 102.73 Bone Stock. BERK HFC's installed 5/14/09 @ 1490miles, 13.212 @ 106.15. Cobb Post MAF Hoses installed 3/20/10 @ 5,043miles, future: FI exhaust with 18" res and s/s cans.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Intake?	AG370z	Intake/Exhaust	5	05-10-2009 09:37 PM
New Intake/Exhausts	BPAuto	Intake/Exhaust	10	03-18-2009 08:58 PM