m370 intake manifold with oem engine cover??

vitinvictor1 · 01-08-2013, 04:30 PM

Im going to buy the motordyne m370 intake manifold but I want to know if you can still using the oem engine cover

N0SL3N · 01-08-2013, 05:21 PM

Yes it is possible but I believe a few minor modifications are needed.

It should be covered in the M370 thread

Eighties Meta · 01-08-2013, 06:37 PM

Quote:

Originally Posted by vitinvictor1

Im going to buy the motordyne m370 intake manifold but I want to know if you can still using the oem engine cover

I think so, AAM did my installation and it has the OEM engine cover still on it.

SS_Firehawk · 01-08-2013, 06:51 PM

Fits fine. No mods needed. It just has a slight curve to it now because the M370 is larger.

N0SL3N · 01-08-2013, 09:39 PM

To use the OEM cover, you have to separate the black plate from the silver plate and then use only the silver plate for the bolts.

I found this in the other thread.

SS_Firehawk · 01-08-2013, 10:06 PM

Black plate isn't attached to the silver plate, they are two distinct pieces.

vitinvictor1 · 01-09-2013, 01:07 AM

Quote:

Originally Posted by N0SL3N

To use the OEM cover, you have to separate the black plate from the silver plate and then use only the silver plate for the bolts.

I found this in the other thread.

Can you give me the link of the thread?

Boost_lee · 01-09-2013, 01:28 AM

Quote:

Originally Posted by N0SL3N

To use the OEM cover, you have to separate the black plate from the silver plate and then use only the silver plate for the bolts.

I found this in the other thread.

Quote:

Originally Posted by SS_Firehawk

Black plate isn't attached to the silver plate, they are two distinct pieces.

The optional black metal cover does bolt to the silver brace/plate underneath. Its just 4 small bolts that secure it, so its easily removable.

You can even run a the upper half OEM cover with the Motordyne black metal plate together if you'd like.

SS_Firehawk · 01-09-2013, 06:44 AM

Quote:

Originally Posted by Boost_lee

The optional black metal cover does bolt to the silver brace/plate underneath. Its just 4 small bolts that secure it, so its easily removable.

You can even run a the upper half OEM cover with the Motordyne black metal plate together if you'd like.

I know that, just stating that they aren't connected when pulling out of the box, mostly a minor and irrelevant detail. Wanted to make sure no one got confused that it's an optional cover and not something that needed to be installed. Thanks for clarifying.

Sh0velMan · 01-09-2013, 08:40 AM

Is it possible to open up the M370?

I REALLY want to see whats inside it.

cheshirecat · 01-09-2013, 01:42 PM

Quote:

Originally Posted by Sh0velMan

Is it possible to open up the M370?

I REALLY want to see whats inside it.

Take a look at a 350z stock plenum and save yourself the excitement.

Sh0velMan · 01-09-2013, 01:46 PM

Quote:

Originally Posted by cheshirecat

Take a look at a 350z stock plenum and save yourself the excitement.

They've sworn over and over that it isn't "Just an HR Manifold" and that they've made changes to it.

Sales@AAMComp · 01-09-2013, 04:42 PM

The M370 is an HR manifold from the 07-08 350z VQ35HR, Motordyne admitted to this, so when you purchase the M370 it is predrilled, for the manifold to fit onto the VQ37HR as a bolt on, it comes with all the fittings, bolts, brackets, etc.

The design of the VQ35HR intake manifold runners are slightly different than the VQ37HR's, hence the pick up in power in the low/mid range on a stock tune, and potential loss up top. That's the trade off between the two...

Can you do it yourself and save money? Sure, go right ahead, but Motordyne saved this headache for everyone and sells it as M370. It's the same thing when people ask me why our Short Tails are so expensive and peopele can go to a muffler shop and get the same thing done for half the price. I tell them, go right ahead. I'm not stopping anyone. It's the same in this instance, you pay for the convenience factor

Back on topic:
we fitted the engine cover by shaving the engine cover hole right above the "v6", the engine cover is still held on by 4 out of 5 studs which is more than enough, it doesn't rattle, move and/or won't fly off

N0SL3N · 01-10-2013, 05:33 PM

Quote:

Originally Posted by vitinvictor1

Can you give me the link of the thread?

The Motordyne M370 Intake Manifold

vitinvictor1 · 01-10-2013, 05:44 PM

Quote:

Originally Posted by N0SL3N

The Motordyne M370 Intake Manifold

Lol what page? It have like 100 pages

01-08-2013, 04:30 PM	#1 (permalink)
vitinvictor1 Base Member Join Date: Jan 2012 Location: puerto rico Age: 34 Posts: 124 Drives: 2011 nissan 370z red Rep Power: 13	m370 intake manifold with oem engine cover?? Im going to buy the motordyne m370 intake manifold but I want to know if you can still using the oem engine cover

01-08-2013, 05:21 PM	#2 (permalink)
N0SL3N Enthusiast Member Join Date: Dec 2011 Location: Toronto Posts: 376 Drives: 2009 PG 370z 6MT Rep Power: 34	Yes it is possible but I believe a few minor modifications are needed. It should be covered in the M370 thread __________________ \| Akuma \| Motordyne \| Z1 \| NST \| CNT \| Stillen \| Avant Garde \| RJM \| Performix \| Tint \| LED \| GTR \| Nissan \|

01-08-2013, 06:51 PM	#4 (permalink)
SS_Firehawk Premium Member Join Date: Oct 2011 Location: Tampa Posts: 4,142 Drives: 13' Magma Red Nismo Rep Power: 7335	Fits fine. No mods needed. It just has a slight curve to it now because the M370 is larger. vitinvictor1 likes this. __________________ Old Car:GTM TSC'd 550whp / 410lbft tq @ 11.88PSI New Car: Under Construction

01-08-2013, 09:39 PM	#5 (permalink)
N0SL3N Enthusiast Member Join Date: Dec 2011 Location: Toronto Posts: 376 Drives: 2009 PG 370z 6MT Rep Power: 34	To use the OEM cover, you have to separate the black plate from the silver plate and then use only the silver plate for the bolts. I found this in the other thread. __________________ \| Akuma \| Motordyne \| Z1 \| NST \| CNT \| Stillen \| Avant Garde \| RJM \| Performix \| Tint \| LED \| GTR \| Nissan \|

01-08-2013, 10:06 PM	#6 (permalink)
SS_Firehawk Premium Member Join Date: Oct 2011 Location: Tampa Posts: 4,142 Drives: 13' Magma Red Nismo Rep Power: 7335	Black plate isn't attached to the silver plate, they are two distinct pieces. __________________ Old Car:GTM TSC'd 550whp / 410lbft tq @ 11.88PSI New Car: Under Construction

01-09-2013, 08:40 AM	#10 (permalink)
Sh0velMan A True Z Fanatic Join Date: Jan 2012 Location: Dallas/Ft.Worth Posts: 3,349 Drives: Noisily. Rep Power: 20	Is it possible to open up the M370? I REALLY want to see whats inside it. __________________ Buy My Car! \| Build Thread

01-09-2013, 04:42 PM	#13 (permalink)
Sales@AAMComp A True Z Fanatic Join Date: Jul 2012 Location: Annapolis Junction, MD Posts: 4,079 Drives: GT-R Rep Power: 21	The M370 is an HR manifold from the 07-08 350z VQ35HR, Motordyne admitted to this, so when you purchase the M370 it is predrilled, for the manifold to fit onto the VQ37HR as a bolt on, it comes with all the fittings, bolts, brackets, etc. The design of the VQ35HR intake manifold runners are slightly different than the VQ37HR's, hence the pick up in power in the low/mid range on a stock tune, and potential loss up top. That's the trade off between the two... Can you do it yourself and save money? Sure, go right ahead, but Motordyne saved this headache for everyone and sells it as M370. It's the same thing when people ask me why our Short Tails are so expensive and peopele can go to a muffler shop and get the same thing done for half the price. I tell them, go right ahead. I'm not stopping anyone. It's the same in this instance, you pay for the convenience factor Back on topic: we fitted the engine cover by shaving the engine cover hole right above the "v6", the engine cover is still held on by 4 out of 5 studs which is more than enough, it doesn't rattle, move and/or won't fly off 2sl0w likes this. __________________ Tyler Day, Technical Sales TylerD@aamcompetition.com 301-497-9214 Direct AAM Competition \| YouTube channel \| LIKE us on Facebook! Last edited by Sales@AAMComp; 01-09-2013 at 04:44 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WTB: Motordyne M370 Intake Manifold	datboiroy	Wanted	0	10-30-2012 01:07 PM
[FOR SALE] Motordyne M370 Intake manifold	TeamMancusoSW	Parts for sale (Private Classifieds)	8	03-13-2012 07:49 PM
[FOR SALE] Motordyne M370 intake manifold.	kellyefields	Parts for sale (Private Classifieds)	18	11-10-2011 04:32 AM
[FOR SALE] Motordyne M370 Intake manifold	Mike	Parts for sale (Private Classifieds)	19	09-10-2011 08:00 AM
Motordyne intake manifold+top secret cf engine cover will they fit?	zuperman 370	Intake/Exhaust	2	09-09-2011 12:20 PM