does the Invidia Gemini exhaust....

RyanWest · 12-29-2012, 01:25 AM

hang lower then stock? im curious before i buy because the Z is sitting really low now....

djpathfinder · 12-29-2012, 02:45 AM

I had an Invidia Gemini exhaust on my 370Z and I don't recall it hanging significantly lower than the stock exhaust. Here's a picture showing the lowest point, which is at the rear-most joint which is just behind the rear diff.

My car was lowered by 0.75" in the front and 0.5" in the rear. Didn't have any problem with scraping. I haven't heard of other Gemini owners report of rubbing either, unlike some FI exhaust owners with lowered cars.

Red_Z · 12-29-2012, 03:22 AM

Here is mine. Not lower, but stick out a little.

Sent from my Nexus 4 using Tapatalk 2

djpathfinder · 12-29-2012, 03:45 AM

Wow, mine didn't stick out that much.

tturbo370z · 12-29-2012, 09:15 AM

Quote:

Originally Posted by djpathfinder

Wow, mine didn't stick out that much.

The tips are adjustable so if you want a little poke

6MT · 12-29-2012, 11:40 AM

Quote:

Originally Posted by Red_Z

Here is mine. Not lower, but stick out a little.

Sent from my Nexus 4 using Tapatalk 2

Nothing personal.... but that looks just horrible.

Red__Zed · 12-29-2012, 11:53 AM

Quote:

Originally Posted by 6MT

Nothing personal.... but that looks just horrible.

Excellent contribution to the thread.

OP, the exhaust sits pretty close to stock levels from what I recall.

Staples · 12-29-2012, 01:53 PM

The tips are adjustable, but if you go with the double walled titanium or stainless tips they will stick out pretty far and not give you as much movement, in or out.

Go with the single walled titanium and it will give you a lot more room for adjustment.

Red_Z · 12-29-2012, 02:16 PM

honestly is not that bad because u rarely bent all the way down to look at the exhaust. It looks just right if you look at it standing up. With the Z big round back, it comes out just enough to show the blues.

RyanWest · 12-29-2012, 03:41 PM

just making sure the mid section doesnt sit lower

Staples · 12-29-2012, 04:54 PM

Quote:

Originally Posted by RyanWest

just making sure the mid section doesnt sit lower

It pretty much sits stock, maybe a tad bit lower just because of the bigger piping. I haven't had an issue bottoming out or denting the mufflers.

batman_4 · 12-29-2012, 05:48 PM

Doesn't hang lower that stock from what i remember before the swap (difference should be small)....I'm on coils and decently low, 2.5in drop.

gplw · 01-02-2013, 09:42 AM

I've just installed the Invidia Gemini Rolled Titanium tip catback exhaust. Doesn't hang too low at all, as these pics show.

12-29-2012, 01:25 AM	#1 (permalink)
RyanWest Track Member Join Date: Jan 2012 Location: Tamp, Fl Posts: 714 Drives: 2009 Nissan Rep Power: 33	does the Invidia Gemini exhaust.... hang lower then stock? im curious before i buy because the Z is sitting really low now....

12-29-2012, 02:45 AM	#2 (permalink)
djpathfinder A True Z Fanatic Join Date: Mar 2010 Location: Edmonton, Canada Posts: 12,910 Drives: 2012 GT-R BE Rep Power: 733	I had an Invidia Gemini exhaust on my 370Z and I don't recall it hanging significantly lower than the stock exhaust. Here's a picture showing the lowest point, which is at the rear-most joint which is just behind the rear diff. My car was lowered by 0.75" in the front and 0.5" in the rear. Didn't have any problem with scraping. I haven't heard of other Gemini owners report of rubbing either, unlike some FI exhaust owners with lowered cars. __________________ 2012 GT-R Black Edition Jet Black 2010 370Z 40th Anniversary // SOLD

12-29-2012, 03:45 AM	#4 (permalink)
djpathfinder A True Z Fanatic Join Date: Mar 2010 Location: Edmonton, Canada Posts: 12,910 Drives: 2012 GT-R BE Rep Power: 733	Wow, mine didn't stick out that much. __________________ 2012 GT-R Black Edition Jet Black 2010 370Z 40th Anniversary // SOLD

12-29-2012, 01:53 PM	#8 (permalink)
Staples Track Member Join Date: Sep 2010 Location: Baltimore, MD Posts: 546 Drives: '08 Infiniti G37s Rep Power: 16	The tips are adjustable, but if you go with the double walled titanium or stainless tips they will stick out pretty far and not give you as much movement, in or out. Go with the single walled titanium and it will give you a lot more room for adjustment. __________________ '08 Infiniti G37s - Forced Induction Fed

12-29-2012, 05:48 PM	#12 (permalink)
batman_4 A True Z Fanatic Join Date: Dec 2008 Location: McAllen Tx. Posts: 1,038 Drives: '09 PW 370Z Rep Power: 368	Doesn't hang lower that stock from what i remember before the swap (difference should be small)....I'm on coils and decently low, 2.5in drop. __________________ '09 6spd. Touring: Eibach / SPC / Motordyne / Berk / Z1 / Oneighty / Mines / SSR / Stillen / CFE

12-29-2012, 03:22 AM	#3 (permalink)
Red_Z Enthusiast Member Join Date: May 2012 Location: California Posts: 332 Drives: A red Z Rep Power: 15	Here is mine. Not lower, but stick out a little. Sent from my Nexus 4 using Tapatalk 2

12-29-2012, 02:16 PM	#9 (permalink)
Red_Z Enthusiast Member Join Date: May 2012 Location: California Posts: 332 Drives: A red Z Rep Power: 15	honestly is not that bad because u rarely bent all the way down to look at the exhaust. It looks just right if you look at it standing up. With the Z big round back, it comes out just enough to show the blues.

12-29-2012, 03:41 PM	#10 (permalink)
RyanWest Track Member Join Date: Jan 2012 Location: Tamp, Fl Posts: 714 Drives: 2009 Nissan Rep Power: 33	just making sure the mid section doesnt sit lower

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Invidia Gemini Exhaust Locally	elliotty	Mid-Atlantic Region	0	12-07-2012 08:46 AM
[FOR SALE] Invidia Gemini catback exhaust	PhantomZ	Parts for sale (Private Classifieds)	1	01-26-2012 09:31 PM
[FOR SALE] Invidia Gemini Exhaust	tyler20c	Parts for sale (Private Classifieds)	5	08-18-2011 03:05 AM
[FOR SALE] Invidia Gemini Exhaust/ Pickup Only	kevr6	Parts for sale (Private Classifieds)	40	07-24-2011 12:12 PM
FS: Invidia Gemini Exhaust	I Run L.A.	Parts for sale (Private Classifieds)	23	03-13-2011 04:57 PM