Post FI HFCs Install/ SES or CEL Help!!

eastwest2300 · 01-07-2013, 06:17 PM

I just got the new sensor today in the mail, and tomorrow I have off, so hopefully, I'll get it in. Im crossing my fingers on this one. I need this to work.

roy'sz · 01-07-2013, 07:03 PM

Let us know bro!

eastwest2300 · 01-07-2013, 07:33 PM

Will do man, dude, please say a prayer for me.

eastwest2300 · 01-08-2013, 12:24 PM

UPDATE!!!!!!

All right fellas, today is my last day on vacation, I got the new sensor last night in the mail.

So I started about 10am, the bad sensor was already out, I got the passenger side of the car up on jacks, I initially started under the vehicle, using my hand, attempting to put the new sensor in the socket of the exhaust manifold. It wasnt working.

I then went from the engine down. After about 30 minutes of that. I worked it into place to where it was semi tight, I then used the o2 socket to tighten it a little bit further, long story short, I used the socket and a ratchet to lock it into place. (During this entire time, and last night before I went to bed, I prayed and prayed on this)

I got it in there pretty tight, connected the harness. Put the air tube, air box, and brace back into place, I let her run for a good 30 minutes. I then drove her a good 7 miles, I got on it a couple times.

I got home, I connected the OBD2 scanner, I cleared the code, the SES/CEL immediately went off, and DID NOT come back on.

So, do you guys think this is it? The end?

Sh0velMan · 01-08-2013, 12:35 PM

Quote:

Originally Posted by eastwest2300

UPDATE!!!!!!

All right fellas, today is my last day on vacation, I got the new sensor last night in the mail.

So I started about 10am, the bad sensor was already out, I got the passenger side of the car up on jacks, I initially started under the vehicle, using my hand, attempting to put the new sensor in the socket of the exhaust manifold. It wasnt working.

I then went from the engine down. After about 30 minutes of that. I worked it into place to where it was semi tight, I then used the o2 socket to tighten it a little bit further, long story short, I used the socket and a ratchet to lock it into place. (During this entire time, and last night before I went to bed, I prayed and prayed on this)

I got it in there pretty tight, connected the harness. Put the air tube, air box, and brace back into place, I let her run for a good 30 minutes. I then drove her a good 7 miles, I got on it a couple times.

I got home, I connected the OBD2 scanner, I cleared the code, the SES/CEL immediately went off, and DID NOT come back on.

So, do you guys think this is it? The end?

Drive it a coupe more times with a good 30 minute break between them to be sure, but I would bet dollars to donuts you're good.

Impacts and hammers break sensors, that's all there is to it.

Glad you're up and running again, error free!

eastwest2300 · 01-08-2013, 12:44 PM

Quote:

Originally Posted by Sh0velMan

Drive it a coupe more times with a good 30 minute break between them to be sure, but I would bet dollars to donuts you're good.

Impacts and hammers break sensors, that's all there is to it.

Glad you're up and running again, error free!

Thank you sooo much man. Brother, trust me, now I know and my guys that worked on my car know next time.

roy'sz · 01-08-2013, 01:38 PM

I would say you are good to go. I would be moderate with your driving conditions, meanong don hot rod it too much but be firm and consistent I. Driving characeristics.

eastwest2300 · 01-08-2013, 02:02 PM

Quote:

Originally Posted by roy'sz

I would say you are good to go. I would be moderate with your driving conditions, meanong don hot rod it too much but be firm and consistent I. Driving characeristics.

Roger that, will do man, thank you!

MyKindaGuise · 01-08-2013, 02:45 PM

I think youre good to go homie

get 50 miles on it doing city and highway and thats pretty much a full cycle if it doesnt come back your good as gold!

eastwest2300 · 01-08-2013, 02:54 PM

All right brother, we'll find out this weekend, there's gonna be a pretty big meet up in Columbia, you should totally come down.. you and pat.

eastwest2300 · 01-08-2013, 02:54 PM

From my house, to Columbia, will be over 50 miles round trip. Thanks Cody.

MyKindaGuise · 01-08-2013, 03:06 PM

Quote:

Originally Posted by eastwest2300

All right brother, we'll find out this weekend, there's gonna be a pretty big meet up in Columbia, you should totally come down.. you and pat.

hm...I do already have the Z detailed and sexy. This is tempting. send me the location. The miata should be turbo'ed again so that should be ready to spank anyone looking to have fun haha.

eastwest2300 · 01-08-2013, 03:36 PM

hahaha, I'll send find the address, dude, seriously come out, if you wanna come up friday night, and crash at my place, its cool. You and Pat.

eastwest2300 · 01-08-2013, 03:38 PM

The Target Parking Lot (you cant miss all the cars), right across from the Famous Dave's, in Columbia.

6201 Columbia Crossing Circle, Columbia, MD

Right off I-95, I believe its route 100.

MyKindaGuise · 01-08-2013, 04:18 PM

Sweet thanks dudddddddeeeee

01-07-2013, 06:17 PM	#136 (permalink)
eastwest2300 A True Z Fanatic Join Date: May 2010 Location: South FL Posts: 90,974 Drives: '16QX70/'21 Supra3.0 Rep Power: 2684550	I just got the new sensor today in the mail, and tomorrow I have off, so hopefully, I'll get it in. Im crossing my fingers on this one. I need this to work. __________________ Infiniti QX70 & Toyota Supra 3.0 Premium

01-07-2013, 07:33 PM	#138 (permalink)
eastwest2300 A True Z Fanatic Join Date: May 2010 Location: South FL Posts: 90,974 Drives: '16QX70/'21 Supra3.0 Rep Power: 2684550	Will do man, dude, please say a prayer for me. roy'sz and jlo370z like this. __________________ Infiniti QX70 & Toyota Supra 3.0 Premium

01-08-2013, 12:24 PM	#139 (permalink)
eastwest2300 A True Z Fanatic Join Date: May 2010 Location: South FL Posts: 90,974 Drives: '16QX70/'21 Supra3.0 Rep Power: 2684550	UPDATE!!!!!! All right fellas, today is my last day on vacation, I got the new sensor last night in the mail. So I started about 10am, the bad sensor was already out, I got the passenger side of the car up on jacks, I initially started under the vehicle, using my hand, attempting to put the new sensor in the socket of the exhaust manifold. It wasnt working. I then went from the engine down. After about 30 minutes of that. I worked it into place to where it was semi tight, I then used the o2 socket to tighten it a little bit further, long story short, I used the socket and a ratchet to lock it into place. (During this entire time, and last night before I went to bed, I prayed and prayed on this) I got it in there pretty tight, connected the harness. Put the air tube, air box, and brace back into place, I let her run for a good 30 minutes. I then drove her a good 7 miles, I got on it a couple times. I got home, I connected the OBD2 scanner, I cleared the code, the SES/CEL immediately went off, and DID NOT come back on. So, do you guys think this is it? The end? __________________ Infiniti QX70 & Toyota Supra 3.0 Premium

01-08-2013, 02:45 PM	#144 (permalink)
MyKindaGuise A True Z Fanatic Join Date: Feb 2012 Location: Pennsylvania Posts: 2,029 Drives: 11' 370z Sprt M6 Rep Power: 19	I think youre good to go homie get 50 miles on it doing city and highway and thats pretty much a full cycle if it doesnt come back your good as gold! __________________ \|445whp398tq\| \|BW S259 Turbo\|3" Downpipe\Exhaust\|ID1000\|AeroMotive\|Tial\|EcuTek\|BC BR\|S0-4\|MaffFab\| MKGs-Single-Turbo

01-08-2013, 02:54 PM	#145 (permalink)
eastwest2300 A True Z Fanatic Join Date: May 2010 Location: South FL Posts: 90,974 Drives: '16QX70/'21 Supra3.0 Rep Power: 2684550	All right brother, we'll find out this weekend, there's gonna be a pretty big meet up in Columbia, you should totally come down.. you and pat. __________________ Infiniti QX70 & Toyota Supra 3.0 Premium

01-07-2013, 07:03 PM	#137 (permalink)
roy'sz A True Z Fanatic Join Date: Aug 2011 Location: palmdale, ca Posts: 1,299 Drives: 2010 nissan 370z Rep Power: 16	Let us know bro!

01-08-2013, 01:38 PM	#142 (permalink)
roy'sz A True Z Fanatic Join Date: Aug 2011 Location: palmdale, ca Posts: 1,299 Drives: 2010 nissan 370z Rep Power: 16	I would say you are good to go. I would be moderate with your driving conditions, meanong don hot rod it too much but be firm and consistent I. Driving characeristics.

01-08-2013, 02:54 PM	#146 (permalink)
eastwest2300 A True Z Fanatic Join Date: May 2010 Location: South FL Posts: 90,974 Drives: '16QX70/'21 Supra3.0 Rep Power: 2684550	From my house, to Columbia, will be over 50 miles round trip. Thanks Cody. MyKindaGuise likes this. __________________ Infiniti QX70 & Toyota Supra 3.0 Premium

01-08-2013, 03:36 PM	#148 (permalink)
eastwest2300 A True Z Fanatic Join Date: May 2010 Location: South FL Posts: 90,974 Drives: '16QX70/'21 Supra3.0 Rep Power: 2684550	hahaha, I'll send find the address, dude, seriously come out, if you wanna come up friday night, and crash at my place, its cool. You and Pat. __________________ Infiniti QX70 & Toyota Supra 3.0 Premium

01-08-2013, 03:38 PM	#149 (permalink)
eastwest2300 A True Z Fanatic Join Date: May 2010 Location: South FL Posts: 90,974 Drives: '16QX70/'21 Supra3.0 Rep Power: 2684550	The Target Parking Lot (you cant miss all the cars), right across from the Famous Dave's, in Columbia. 6201 Columbia Crossing Circle, Columbia, MD Right off I-95, I believe its route 100. __________________ Infiniti QX70 & Toyota Supra 3.0 Premium

01-08-2013, 04:18 PM	#150 (permalink)
MyKindaGuise A True Z Fanatic Join Date: Feb 2012 Location: Pennsylvania Posts: 2,029 Drives: 11' 370z Sprt M6 Rep Power: 19	Sweet thanks dudddddddeeeee __________________ \|445whp398tq\| \|BW S259 Turbo\|3" Downpipe\Exhaust\|ID1000\|AeroMotive\|Tial\|EcuTek\|BC BR\|S0-4\|MaffFab\| MKGs-Single-Turbo

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
External Wastegates Post Install - Possible?	DIGItonium	Forced Induction	7	05-25-2012 02:53 PM
Z1 post MAF hose install problem	USAFZDRIVER	Intake/Exhaust	16	05-03-2012 04:21 AM
Asap help with aftermarket install post	Carbon_z	Audio & Video	5	11-01-2010 09:25 PM
shop or person to install HFCs in NY?	toxik	North East Region	11	05-16-2010 06:49 PM
Stillen Headers + Berk HFCs self-install report	wstar	Intake/Exhaust	84	04-14-2009 01:09 PM