Post FI HFCs Install/ SES or CEL Help!!

eastwest2300 · 12-27-2012, 06:35 PM

See pics!!!!

Hey fellas, I need some help, so I had my Fast Intentions Non Resonated HFCs installed about a week ago. I got a couple Service Engine Soon indicators go off. I bought a OBD2 reader.

Here are the codes, if anyone can help, or atleast point me in the right direction as to how I can fix it. I'd love you forever. I took it to the dealer, and they wanted to charge me because my car has been "modified." The mechanic did try to clear the codes, they wouldnt clear.

Any ideas?

P0031 Heater Control Circuit Low (Bank 1, Sensor 1)

P1148 --- 1. Closed Loop. 2. Closed Loop, Bank 1
Fuel Sys 1 -- OL
Fuel Sys 2 -- CL
Calc Load (%) -- 18.8
ECT (Celsius) -- 89
STFT B1 (%) -- 0.0
LTFT B1 (%) -- 0.0
STFT B2 (%) --2.3
LTFT B2 (%) -- 0.0
MAP (kPa) -- 28
Eng RPM -- 663
Veh Speed (km/h) -- 0
Spark Adv -- 9.0
IAT (Celsius) -- 38
TPS (%) --0.8
O2S B1 S2 (V) -- 0.280
STFT B1 S2 (%) -- 99.2
O2S B3 S2 (V) -- 0.280
STFT B3 S2 (%) -- 99.2
Run Time (Sec) -- 177
MIL Dis (km) -- 0
LAMBDA B1 S1 -- 1.002
O2S B1 S1 (V) -- 2.257
LAMBDA B3 S1 -- 0.996
O2S B3 S1 (V) -- 2.207
Command EVAP (%) -- 0.0
Fuel Level (%) -- 100.0
Warm_up DTC Clr -- 0
Clr Dist (km) -- 0
EVAP_VP (Pa) -- 0.0
BARO (Kpa) -- 100
CAT Te 11 (Celsius) -- 20
CAT Te 21 (Celsius) -- 20
ECU Volts (V) -- 14.240
LOAD Value (%) -- 15.7
EQ Ratio -- 0.999
Rel TPS (%) -- 0.0
TPS B (%) -- 0.8
ACC Pedal D (%) -- 0.0
ACC Pedal E (%) -- 0.0
Command TAC (%) -- 0.8
MIL Time -- 0h0m
Clr Time -- 0h0m

***Update 1 January 2013***

Cristobal09 · 12-27-2012, 06:43 PM

may want to post this in the exhaust section for more views...

Intake/Exhaust - Nissan 370Z Forum

eastwest2300 · 12-27-2012, 06:47 PM

Did triple move this? Im sure he did..

gomer_110 · 12-27-2012, 08:40 PM

Just a guess but I'm gonna have to say that your primary bank 1 O2 sensor is either bad or the wiring is messed up. Reason I say this is the P0031 code. Just can't see that popping up unless the wiring or sensor are junk.

eastwest2300 · 12-27-2012, 08:43 PM

Brother, please tell me more, what do I gotta do? what do I gotta check?

MJB · 12-27-2012, 09:34 PM

Did these codes pop up right after the install? Sensors could have been damaged during the install. You could get an Uprev tune in which they will delete the loop to the O2 sensors on the cats so you'll never get a code.

eastwest2300 · 12-27-2012, 09:39 PM

yeah man, as soon as we finished the install, turned on the car.. they came right on. I was told to stick some steel wool inside the j-bung of each cat. That unfortunately didnt clear any codes.. ughhh.

eastwest2300 · 12-27-2012, 09:40 PM

I may have to look into getting a tune. I would like to fix it without getting to that point, but I might just have to.

MJB · 12-27-2012, 09:41 PM

Does your cat have O2 sensor anti fouler extenders on them? If not, you could buy some and see if that helps.

*Edit... I just re-read your original post and realized you have FI cats, so you already have the extenders on there. Hopefully the mechanic didn't use any impact/air tools to get your cats off, as that can easily damage the sensors. I'm thinking one of the sensors is damaged and needs to be replaced.

eastwest2300 · 12-27-2012, 09:44 PM

Quote:

Originally Posted by MJB

Does your cat have O2 sensor anti fouler extenders on them? If not, you could buy some and see if that helps.

Sh!t, Im not sure what that is... damn.

eastwest2300 · 12-27-2012, 09:47 PM

I just googled it, and on another forum, a guy was saying something about those things cause fuel problems. Im not sure if thats the case with our cars, but I'd be willing to check it out, and give it a shot.

MJB · 12-27-2012, 09:49 PM

Hey OP, your FI cats already have a "J" style type of extender on there... So honestly I think one of the sensors was damaged during the install.

eastwest2300 · 12-27-2012, 09:53 PM

Quote:

Originally Posted by MJB

Does your cat have O2 sensor anti fouler extenders on them? If not, you could buy some and see if that helps.

*Edit... I just re-read your original post and realized you have FI cats, so you already have the extenders on there. Hopefully the mechanic didn't use any impact/air tools to get your cats off, as that can easily damage the sensors. I'm thinking one of the sensors is damaged and needs to be replaced.

Yeah, we did use impact wrenches. I was told theres o2 sensors obviously on the bottom of the cat, but also 2 in in the exhaust manifold, is that right? (one on each side?)

eastwest2300 · 12-27-2012, 09:54 PM

Quote:

Originally Posted by MJB

Hey OP, your FI cats already have a "J" style type of extender on there... So honestly I think one of the sensors was damaged during the install.

Brother, can you tell me what I need to replace?

MJB · 12-27-2012, 09:55 PM

Yeah, you are right on the O2 locations. I can almost guarantee that a sensor was damaged due to using impacts tools. Thats is a huge NO NO when it comes to removing the cats or exhaust manifolds! Or atleast remove the sensors first before you use impact tools

12-27-2012, 06:35 PM	#1 (permalink)
eastwest2300 A True Z Fanatic Join Date: May 2010 Location: South FL Posts: 90,987 Drives: '16QX70/'21 Supra3.0 Rep Power: 2684550	Post FI HFCs Install/ SES or CEL Help!! See pics!!!! Hey fellas, I need some help, so I had my Fast Intentions Non Resonated HFCs installed about a week ago. I got a couple Service Engine Soon indicators go off. I bought a OBD2 reader. Here are the codes, if anyone can help, or atleast point me in the right direction as to how I can fix it. I'd love you forever. I took it to the dealer, and they wanted to charge me because my car has been "modified." The mechanic did try to clear the codes, they wouldnt clear. Any ideas? P0031 Heater Control Circuit Low (Bank 1, Sensor 1) P1148 --- 1. Closed Loop. 2. Closed Loop, Bank 1 Fuel Sys 1 -- OL Fuel Sys 2 -- CL Calc Load (%) -- 18.8 ECT (Celsius) -- 89 STFT B1 (%) -- 0.0 LTFT B1 (%) -- 0.0 STFT B2 (%) --2.3 LTFT B2 (%) -- 0.0 MAP (kPa) -- 28 Eng RPM -- 663 Veh Speed (km/h) -- 0 Spark Adv -- 9.0 IAT (Celsius) -- 38 TPS (%) --0.8 O2S B1 S2 (V) -- 0.280 STFT B1 S2 (%) -- 99.2 O2S B3 S2 (V) -- 0.280 STFT B3 S2 (%) -- 99.2 Run Time (Sec) -- 177 MIL Dis (km) -- 0 LAMBDA B1 S1 -- 1.002 O2S B1 S1 (V) -- 2.257 LAMBDA B3 S1 -- 0.996 O2S B3 S1 (V) -- 2.207 Command EVAP (%) -- 0.0 Fuel Level (%) -- 100.0 Warm_up DTC Clr -- 0 Clr Dist (km) -- 0 EVAP_VP (Pa) -- 0.0 BARO (Kpa) -- 100 CAT Te 11 (Celsius) -- 20 CAT Te 21 (Celsius) -- 20 ECU Volts (V) -- 14.240 LOAD Value (%) -- 15.7 EQ Ratio -- 0.999 Rel TPS (%) -- 0.0 TPS B (%) -- 0.8 ACC Pedal D (%) -- 0.0 ACC Pedal E (%) -- 0.0 Command TAC (%) -- 0.8 MIL Time -- 0h0m Clr Time -- 0h0m *Update 1 January 2013* wheee! likes this. __________________ Infiniti QX70 & Toyota Supra 3.0 Premium Last edited by eastwest2300; 01-01-2013 at 02:21 PM.

12-27-2012, 06:43 PM	#2 (permalink)
Cristobal09 A True Z Fanatic Join Date: Nov 2011 Location: NOVA Posts: 1,430 Drives: 22 ZL1 & Explorer ST Rep Power: 3372	may want to post this in the exhaust section for more views... Intake/Exhaust - Nissan 370Z Forum __________________ 2022 Camaro ZL1 2021 Explorer ST

12-27-2012, 06:47 PM	#3 (permalink)
eastwest2300 A True Z Fanatic Join Date: May 2010 Location: South FL Posts: 90,987 Drives: '16QX70/'21 Supra3.0 Rep Power: 2684550	Did triple move this? Im sure he did.. __________________ Infiniti QX70 & Toyota Supra 3.0 Premium

12-27-2012, 08:40 PM	#4 (permalink)
gomer_110 A True Z Fanatic Join Date: Aug 2011 Location: Perrysburg, OH Posts: 17,992 Drives: '11 Nismo #528 GM Rep Power: 36941	Just a guess but I'm gonna have to say that your primary bank 1 O2 sensor is either bad or the wiring is messed up. Reason I say this is the P0031 code. Just can't see that popping up unless the wiring or sensor are junk. __________________ '11 370Z Nismo #528 Fast Intentions \| Stillen \| Motordyne \| Uprev \| CSF \| Zspeed \| Z1 Motorsports \| AST \| Swift \| SPC \| SPL \| Whiteline \| Hotchkis \| Bride \| Schroth \| Robispec \| Cusco \| Nismo \| Volk \| Forgestar \| Hoosier \| RJM '17 Titan Bone Stock

12-27-2012, 08:43 PM	#5 (permalink)
eastwest2300 A True Z Fanatic Join Date: May 2010 Location: South FL Posts: 90,987 Drives: '16QX70/'21 Supra3.0 Rep Power: 2684550	Brother, please tell me more, what do I gotta do? what do I gotta check? __________________ Infiniti QX70 & Toyota Supra 3.0 Premium

12-27-2012, 09:34 PM	#6 (permalink)
MJB A True Z Fanatic Join Date: Aug 2011 Location: Tacoma, WA Age: 41 Posts: 1,498 Drives: a POS truck Rep Power: 496	Did these codes pop up right after the install? Sensors could have been damaged during the install. You could get an Uprev tune in which they will delete the loop to the O2 sensors on the cats so you'll never get a code. __________________ 09 Nismo #0483 sold. Viper or C7 next time around.

12-27-2012, 09:39 PM	#7 (permalink)
eastwest2300 A True Z Fanatic Join Date: May 2010 Location: South FL Posts: 90,987 Drives: '16QX70/'21 Supra3.0 Rep Power: 2684550	yeah man, as soon as we finished the install, turned on the car.. they came right on. I was told to stick some steel wool inside the j-bung of each cat. That unfortunately didnt clear any codes.. ughhh. __________________ Infiniti QX70 & Toyota Supra 3.0 Premium

12-27-2012, 09:40 PM	#8 (permalink)
eastwest2300 A True Z Fanatic Join Date: May 2010 Location: South FL Posts: 90,987 Drives: '16QX70/'21 Supra3.0 Rep Power: 2684550	I may have to look into getting a tune. I would like to fix it without getting to that point, but I might just have to. __________________ Infiniti QX70 & Toyota Supra 3.0 Premium

12-27-2012, 09:41 PM	#9 (permalink)
MJB A True Z Fanatic Join Date: Aug 2011 Location: Tacoma, WA Age: 41 Posts: 1,498 Drives: a POS truck Rep Power: 496	Does your cat have O2 sensor anti fouler extenders on them? If not, you could buy some and see if that helps. Edit... I just re-read your original post and realized you have FI cats, so you already have the extenders on there. Hopefully the mechanic didn't use any impact/air tools to get your cats off, as that can easily damage the sensors. I'm thinking one of the sensors is damaged and needs to be replaced. __________________ 09 Nismo #0483 sold. Viper or C7 next time around. Last edited by MJB; 12-27-2012 at 09:46 PM.*

12-27-2012, 09:47 PM	#11 (permalink)
eastwest2300 A True Z Fanatic Join Date: May 2010 Location: South FL Posts: 90,987 Drives: '16QX70/'21 Supra3.0 Rep Power: 2684550	I just googled it, and on another forum, a guy was saying something about those things cause fuel problems. Im not sure if thats the case with our cars, but I'd be willing to check it out, and give it a shot. __________________ Infiniti QX70 & Toyota Supra 3.0 Premium

12-27-2012, 09:49 PM	#12 (permalink)
MJB A True Z Fanatic Join Date: Aug 2011 Location: Tacoma, WA Age: 41 Posts: 1,498 Drives: a POS truck Rep Power: 496	Hey OP, your FI cats already have a "J" style type of extender on there... So honestly I think one of the sensors was damaged during the install. __________________ 09 Nismo #0483 sold. Viper or C7 next time around.

12-27-2012, 09:55 PM	#15 (permalink)
MJB A True Z Fanatic Join Date: Aug 2011 Location: Tacoma, WA Age: 41 Posts: 1,498 Drives: a POS truck Rep Power: 496	Yeah, you are right on the O2 locations. I can almost guarantee that a sensor was damaged due to using impacts tools. Thats is a huge NO NO when it comes to removing the cats or exhaust manifolds! Or atleast remove the sensors first before you use impact tools yoyoPR likes this. __________________ 09 Nismo #0483 sold. Viper or C7 next time around. Last edited by MJB; 12-27-2012 at 10:16 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
External Wastegates Post Install - Possible?	DIGItonium	Forced Induction	7	05-25-2012 02:53 PM
Z1 post MAF hose install problem	USAFZDRIVER	Intake/Exhaust	16	05-03-2012 04:21 AM
Asap help with aftermarket install post	Carbon_z	Audio & Video	5	11-01-2010 09:25 PM
shop or person to install HFCs in NY?	toxik	North East Region	11	05-16-2010 06:49 PM
Stillen Headers + Berk HFCs self-install report	wstar	Intake/Exhaust	84	04-14-2009 01:09 PM