Post FI HFCs Install/ SES or CEL Help!!

roy'sz · 01-01-2013, 06:48 PM

Quote:

Originally Posted by MyKindaGuise

The padding could be the reason for this issue though..if the padding isn't installed as normal and extra heat is flowing up around the AFR sensor it could have been periodically wearing down the wires. We will keep everyone up to date. I am still not convinced these "vibrations" are the cause. I had zero trouble doing my header and cat removal. Also if vibrations like that can damage the o2's and afrs like that then I am truly surprised we don't see more of this from people who daily drive. Hell if you hit a pot hole on the highway the vibration from that is 10 fold of that of an impact.

I think they are...here is why. With your theory with the pot hole take into consideration that there is a "SUSPENSION" on the car and that the engine,trans have neoprene rubber mounts that minimilize the amount of vibration through the chassis. The impact gun that you used put out a harder pounding sensation then any pothole on the road will. case in point put a 6in extension on your gun and hold it as it impacts. then put it on the lug nut with your hand on the frame of the car and it is 2 different sensations. That is just my humble opinion....hope it makes sense.

roy'sz · 01-01-2013, 06:49 PM

Quote:

Originally Posted by eastwest2300

Hey Cody, I think Im gonna pull the o2 sensor out and have a look at it, and also look at the wires too just ensure everything's fine. I'll also clean around the area where the sensor physically plugs into.

how about you swap them from left to right and reset the ecu. If it follows then you have successfully narrowed it down?

eastwest2300 · 01-01-2013, 08:25 PM

Roy, you're saying swap them passenger side to driver's side? (I just woke up from the best power nap EVER...oh man, I feel soo damn refreshed, I needed it)

roy'sz · 01-01-2013, 08:30 PM

yes, if you swap them it and reset the ecu it should carry over from one side to the other. Process of elimination.

hope this helps

eastwest2300 · 01-01-2013, 08:49 PM

Quote:

Originally Posted by roy'sz

yes, if you swap them it and reset the ecu it should carry over from one side to the other. Process of elimination.

hope this helps

Yeah that makes sense, thanks bro.

roy'sz · 01-01-2013, 08:50 PM

No prob....let us know wassup asap.

eastwest2300 · 01-01-2013, 09:03 PM

I will bro, I will. Sh!t, no one wants this problem fixed faster than I do.. haha.

MJB · 01-05-2013, 11:33 AM

Updates?

roy'sz · 01-05-2013, 04:15 PM

So.....what happened?

eastwest2300 · 01-07-2013, 12:55 PM

Quote:

Originally Posted by MJB

Updates?

Hey fellas, sorry it took me a minute to respond, been kinda busy. All right so here's the deal..

Ok soo after a good two days of trying to get that fvcking o2 sensor off, I took it to a shop that I had dealt with before that deals with exhaust systems. The mechanic and the owner loved my Z, and I let them drive it, they were like holy sh!t your car's fast..

So I told them what was going on, and that all I needed was for them to remove the o2 sensor. I'd pay them to remove it, We put the car on the lift, and it took a good hour after torching it 6 or 7 times, it FINALLY came off. They actually did it for free, and wanted to put my Z on their website.

BUT, the o2 sensor that I ordered, the company sent me the wrong one, so I'm actually waiting for a new one in the mail, I should have it by Thursday at the latest.

So my Z pretty much sounds like a Chopper, without one of the o2 sensors in.

Sh0velMan · 01-07-2013, 01:34 PM

Quote:

Originally Posted by eastwest2300

Hey fellas, sorry it took me a minute to respond, been kinda busy. All right so here's the deal..

Ok soo after a good two days of trying to get that fvcking o2 sensor off, I took it to a shop that I had dealt with before that deals with exhaust systems. The mechanic and the owner loved my Z, and I let them drive it, they were like holy sh!t your car's fast..

So I told them what was going on, and that all I needed was for them to remove the o2 sensor. I'd pay them to remove it, We put the car on the lift, and it took a good hour after torching it 6 or 7 times, it FINALLY came off. They actually did it for free, and wanted to put my Z on their website.

BUT, the o2 sensor that I ordered, the company sent me the wrong one, so I'm actually waiting for a new one in the mail, I should have it by Thursday at the latest.

So my Z pretty much sounds like a Chopper, without one of the o2 sensors in.

Mother of God, don't drive it with an empty bung!

Especially the one on the header, that's begging for damage to your exhaust valves and an engine fire!

eastwest2300 · 01-07-2013, 01:39 PM

Quote:

Originally Posted by Sh0velMan

Mother of God, don't drive it with an empty bung!

Especially the one on the header, that's begging for damage to your exhaust valves and an engine fire!

Thanks bro, I didnt know, it was only about a mile and a half.

roy'sz · 01-07-2013, 02:27 PM

Not to go off topic my wifes altima had the afr, O2 sensor , and ecv go out. Total damage was $1100. Hope this helps moral wise :-)

eastwest2300 · 01-07-2013, 05:00 PM

Quote:

Originally Posted by roy'sz

Not to go off topic my wifes altima had the afr, O2 sensor , and ecv go out. Total damage was $1100. Hope this helps moral wise :-)

Do you think this is what happened in my case?

roy'sz · 01-07-2013, 05:58 PM

It could be....you should be able to tell when you get that sensor.

01-01-2013, 08:25 PM	#123 (permalink)
eastwest2300 A True Z Fanatic Join Date: May 2010 Location: South FL Posts: 90,972 Drives: '16QX70/'21 Supra3.0 Rep Power: 2684550	Roy, you're saying swap them passenger side to driver's side? (I just woke up from the best power nap EVER...oh man, I feel soo damn refreshed, I needed it) __________________ Infiniti QX70 & Toyota Supra 3.0 Premium

01-01-2013, 09:03 PM	#127 (permalink)
eastwest2300 A True Z Fanatic Join Date: May 2010 Location: South FL Posts: 90,972 Drives: '16QX70/'21 Supra3.0 Rep Power: 2684550	I will bro, I will. Sh!t, no one wants this problem fixed faster than I do.. haha. __________________ Infiniti QX70 & Toyota Supra 3.0 Premium

01-05-2013, 11:33 AM	#128 (permalink)
MJB A True Z Fanatic Join Date: Aug 2011 Location: Tacoma, WA Age: 41 Posts: 1,498 Drives: a POS truck Rep Power: 496	Updates? __________________ 09 Nismo #0483 sold. Viper or C7 next time around.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
External Wastegates Post Install - Possible?	DIGItonium	Forced Induction	7	05-25-2012 02:53 PM
Z1 post MAF hose install problem	USAFZDRIVER	Intake/Exhaust	16	05-03-2012 04:21 AM
Asap help with aftermarket install post	Carbon_z	Audio & Video	5	11-01-2010 09:25 PM
shop or person to install HFCs in NY?	toxik	North East Region	11	05-16-2010 06:49 PM
Stillen Headers + Berk HFCs self-install report	wstar	Intake/Exhaust	84	04-14-2009 01:09 PM

01-01-2013, 08:30 PM	#124 (permalink)
roy'sz A True Z Fanatic Join Date: Aug 2011 Location: palmdale, ca Posts: 1,299 Drives: 2010 nissan 370z Rep Power: 16	yes, if you swap them it and reset the ecu it should carry over from one side to the other. Process of elimination. hope this helps

01-01-2013, 08:50 PM	#126 (permalink)
roy'sz A True Z Fanatic Join Date: Aug 2011 Location: palmdale, ca Posts: 1,299 Drives: 2010 nissan 370z Rep Power: 16	No prob....let us know wassup asap.

01-05-2013, 04:15 PM	#129 (permalink)
roy'sz A True Z Fanatic Join Date: Aug 2011 Location: palmdale, ca Posts: 1,299 Drives: 2010 nissan 370z Rep Power: 16	So.....what happened?

01-07-2013, 02:27 PM	#133 (permalink)
roy'sz A True Z Fanatic Join Date: Aug 2011 Location: palmdale, ca Posts: 1,299 Drives: 2010 nissan 370z Rep Power: 16	Not to go off topic my wifes altima had the afr, O2 sensor , and ecv go out. Total damage was $1100. Hope this helps moral wise :-)

01-07-2013, 05:58 PM	#135 (permalink)
roy'sz A True Z Fanatic Join Date: Aug 2011 Location: palmdale, ca Posts: 1,299 Drives: 2010 nissan 370z Rep Power: 16	It could be....you should be able to tell when you get that sensor.