Short ram intake install help?

Diversion · 07-03-2009, 05:41 PM

Do you have to remove the bumper to even install short rams because i've removed everything from the stock airbox on the left side and something is still holding it in place and I don't see the last bolt..

semtex · 07-03-2009, 05:43 PM

No. The airboxes come out without removing the front fascia. Just take a breather, go back and take your time looking at it. You'll figure it out.

Modshack · 07-03-2009, 05:44 PM

Quote:

Originally Posted by Diversion

Do you have to remove the bumper to even install short rams because i've removed everything from the stock airbox on the left side and something is still holding it in place and I don't see the last bolt..

It should just lift out if you've removed the visible bolts. It does slot into the Pass through fitting (that seal it to the Radiator wall). Just give it a yank. There are Rubber fittings at the bottom that the stock box fits into. Give it a pull..

Diversion · 07-03-2009, 11:52 PM

Whew! Thanks guys.. I figured it out, they lift straight up after that one bolt is out

Installed Status Elite intakes, check..

ZforMe · 07-04-2009, 12:51 AM

Pics?

Diversion · 07-04-2009, 05:42 PM

Pics coming soon, i'm a little busy prepping for tonight's festivities..

Happy 4th!

07-03-2009, 05:41 PM	#1 (permalink)
Diversion Enthusiast Member Join Date: Apr 2009 Location: Jacksonville, Florida Posts: 393 Drives: 09 370Z Silver/Persi Rep Power: 284	Short ram intake install help? Do you have to remove the bumper to even install short rams because i've removed everything from the stock airbox on the left side and something is still holding it in place and I don't see the last bolt..

07-03-2009, 05:43 PM	#2 (permalink)
semtex A True Z Fanatic Join Date: Jan 2009 Location: Behind enemy lines Age: 54 Posts: 5,995 Drives: People to drink Rep Power: 32	No. The airboxes come out without removing the front fascia. Just take a breather, go back and take your time looking at it. You'll figure it out. __________________ "There are no small accidents on this circuit." -- Ayrton Senna 316.8whp & 248 ft/lbs (Dyno Dynamics) \| 319whp & 256 ft/lbs (DynoJet) (04/23/10) Stillen G3 CAI, CBE, Pulley / F.I. LTH / GTSpec Ladder Brace / Setrab Oil Cooler / UpRev-tuned by Forged Perf.

07-04-2009, 12:51 AM	#5 (permalink)
ZforMe Base Member Join Date: Jan 2009 Location: Memphis TN Posts: 238 Drives: 370Z Sport Auto PG Rep Power: 16	Pics? __________________ 13.369 @ 102.73 Bone Stock. BERK HFC's installed 5/14/09 @ 1490miles, 13.212 @ 106.15. Cobb Post MAF Hoses installed 3/20/10 @ 5,043miles, future: FI exhaust with 18" res and s/s cans.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My turn w/ the Short Shifter install, here is the knob I used!	kevr6	Exterior & Interior	29	05-18-2010 07:00 PM
NEW from AMPLIFIED:TAKEDA/AFE SHORT RAM INTAKE for NISSAN 370z	LOU@AMPLIFIED	Exhaust/Intake	72	08-11-2009 09:11 AM

07-03-2009, 11:52 PM	#4 (permalink)
Diversion Enthusiast Member Join Date: Apr 2009 Location: Jacksonville, Florida Posts: 393 Drives: 09 370Z Silver/Persi Rep Power: 284	Whew! Thanks guys.. I figured it out, they lift straight up after that one bolt is out Installed Status Elite intakes, check..

07-04-2009, 05:42 PM	#6 (permalink)
Diversion Enthusiast Member Join Date: Apr 2009 Location: Jacksonville, Florida Posts: 393 Drives: 09 370Z Silver/Persi Rep Power: 284	Pics coming soon, i'm a little busy prepping for tonight's festivities.. Happy 4th!