Fast Intentions exhaust is here!

Darkstar87695 · 03-30-2010, 03:09 PM

Hey Tony, I talked to you close to a week ago and we discussed my leaking exhaust. If I remember correctly the last thing we spoke about was getting Midas to check and see if the flange is warped and to make sure they are using the HTS correctly. Well, I talked to them and they are insisting it is not warped but can not decide on what to do about it. One person there wants me to find a metal gasket and the other wants to use another type of sealant. Honestly I am tired of talking to them about it and am highly considering trailoring the car over 2000 miles to you so you can do it right. Anyways, the main reason I am contacting you is because I am wondering what are the damages of leaving the problem until May when I could possibly take it to you. Or should I just take it somewhere else? The exhaust isn't leaking into the car so thats not an issue.

Vegitto-kun · 03-30-2010, 03:22 PM

Quote:

Originally Posted by jamaica951

Thank you so much. Now I know what my exhaust is going to sounds like now.

. Imagine with the header combo...

now we need a shootout video

.

I always wondered. what are those holes for in the tips of the exhaust.

XwChriswX · 03-30-2010, 03:23 PM

Quote:

Originally Posted by Vegitto-kun

I always wondered. what are those holes for in the tips of the exhaust.

Thats where the lemonade is made, you're not supposed to see that...

Vegitto-kun · 03-30-2010, 04:39 PM

Quote:

Originally Posted by XwChriswX

Thats where the lemonade is made, you're not supposed to see that...

excuse me for not knowing

bejan · 03-30-2010, 05:09 PM

I've got a video of a cold start which I will post later.

m4a1mustang · 03-30-2010, 05:10 PM

Lemonade FTW.

BOLIO 671 · 03-30-2010, 08:02 PM

Quick question....which will come out louder...having 12" or 18" resonators?

m4a1mustang · 03-30-2010, 08:05 PM

Quote:

Originally Posted by BOLIO 671

Quick question....which will come out louder...having 12" or 18" resonators?

12". The smaller the resonator, the louder the exhaust.

F.I. Inc. · 03-30-2010, 09:08 PM

Quote:

Originally Posted by Darkstar87695

Hey Tony, I talked to you close to a week ago and we discussed my leaking exhaust. If I remember correctly the last thing we spoke about was getting Midas to check and see if the flange is warped and to make sure they are using the HTS correctly. Well, I talked to them and they are insisting it is not warped but can not decide on what to do about it. One person there wants me to find a metal gasket and the other wants to use another type of sealant. Honestly I am tired of talking to them about it and am highly considering trailoring the car over 2000 miles to you so you can do it right. Anyways, the main reason I am contacting you is because I am wondering what are the damages of leaving the problem until May when I could possibly take it to you. Or should I just take it somewhere else? The exhaust isn't leaking into the car so thats not an issue.

They do not know that the flanges are warped unless they actually take it off and check it. Since they apparently cannot get the silicone right, call up Bryan at Berk Technology and buy two gaskets. Either way, the pipes are going to have to come off to either put new silicone on (correctly) or install the gasket. Just make sure that you scrape all of the silicone off if you use the gasket. Call me if you need to...

Thanks, Tony

nuTinmuch · 03-30-2010, 09:32 PM

Were you able to ship 'em today?

F.I. Inc. · 03-30-2010, 09:34 PM

Quote:

Originally Posted by nuTinmuch

Were you able to ship 'em today?

Sorry bud, I got wrapped up with the headers. I have it about half way done. I will do my best to have it in the mail tomorrow or Thursday at the latest. Thank you for your continued patenice...

Tony

Xan · 03-30-2010, 09:43 PM

What is the current lead time on one?

F.I. Inc. · 03-30-2010, 09:51 PM

Quote:

Originally Posted by Xan

What is the current lead time on one?

The current wait time is 6-8 weeks. Just to give you the heads up, we do not bill you until we ship.

Thanks, Tony

Darkstar87695 · 03-30-2010, 11:07 PM

Thanks Tony

BOLIO 671 · 03-30-2010, 11:51 PM

Quote:

Originally Posted by m4a1mustang

12". The smaller the resonator, the louder the exhaust.

Thanks for the clarification

03-30-2010, 05:10 PM	#3426 (permalink)
m4a1mustang A True Z Fanatic Join Date: Feb 2009 Location: Northern VA Posts: 55,385 Drives: on two wheels Rep Power: 6962	Lemonade FTW. __________________ - Steve Zs & Coffee - Saturdays at 10AM in Fairfax, VA and Columbia, MD (Click the banner!) LIKE us on Facebook!

03-30-2010, 08:02 PM	#3427 (permalink)
BOLIO 671 A True Z Fanatic Join Date: Mar 2010 Location: GUAHAN Posts: 1,198 Drives: To & From then Back Rep Power: 3399	Quick question....which will come out louder...having 12" or 18" resonators? __________________ 2013 Nismo Z34 / FI TT #091 / IG: @lilzilla_z34

03-30-2010, 09:32 PM	#3430 (permalink)
nuTinmuch A True Z Fanatic Join Date: Dec 2009 Location: New Jersey Posts: 1,092 Drives: PG 7AT 370Z Rep Power: 17	Were you able to ship 'em today? __________________ nuTinmuch! -- Platinum Graphite 370Z -- Check out my Gallery thread here!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fast girls, Fast cars, One wild ride- Sports Illustrated Swimsuit 2009	Venomous01	Nissan 370Z Photos / Spyshots / Video / Media Gallery	5	01-25-2013 10:27 AM
the Fast and the....	arcticreaver	The Lounge (Off Topic)	1	05-04-2009 05:48 PM
Fast girls, Fast cars, One wild ride- Sports Illustrated Swimsuit 2009	zero	Nissan 370Z Photos / Spyshots / Video / Media Gallery	33	02-26-2009 10:14 PM
Fast Intentions needs prototype!!!	F.I. Inc.	Intake/Exhaust	28	02-16-2009 07:35 AM

03-30-2010, 05:09 PM	#3425 (permalink)
bejan Base Member Join Date: Feb 2010 Location: Chatsworth, CA Posts: 70 Drives: 09 Nissan 370Z PW M6 Rep Power: 15	I've got a video of a cold start which I will post later.

03-30-2010, 09:43 PM	#3432 (permalink)
Xan A True Z Fanatic Join Date: Jan 2010 Location: MA Posts:99999999999999 Posts: 3,301 Drives: 370Z 40th Aniversary Rep Power: 24	What is the current lead time on one?