Fast Intentions exhaust is here!

TerribleONE · 03-30-2012, 11:44 AM

Quote:

Originally Posted by Nixlimited

But also keep in mind that the mufflers also sit quite a bit lower than the stock as they extend back from the axle. This does make a difference. It can be seen easily here in my wheel-level video of the OEM v FI exhuast: Link to my review. Note the visibility of the cans below the level of the rear valence with the FI versus the stock muffler.

I am aware of that on the version 1 exhaust before they raised the cans up a little bit. I am pretty sure now that the system actually doesnt sit any lower than stock!

Nixlimited · 03-30-2012, 11:50 AM

Quote:

Originally Posted by TerribleONE

I am aware of that on the version 1 exhaust before they raised the cans up a little bit. I am pretty sure now that the system actually doesnt sit any lower than stock!

Mine is the most recent version. Just got made a few weeks ago. I think what doesn't sit lower than stock is the lowest part of the exhaust system, which are the the pipes that go below the axles. The cans, while not the lowest part, still sit much lower than the factory muffler, which is not visible from the side or back of the car really.

gomer_110 · 03-30-2012, 12:00 PM

Just got my non-res installed last night. I was grinning ear to ear the first time I started it up.

kensnismo · 03-30-2012, 01:51 PM

image.jpg just waiting for a test drive.

Huan'z · 03-31-2012, 09:46 AM

Man... When I warm up my car in the morning before go to work. My house shacking!!! I got carbon 18" CBE and res. testpipe! Love the sound of it with injen CAI!

Huck · 03-31-2012, 11:10 AM

Man all this talk is making me so happy! I can't wait to get mine, got quoted middle of June of non resonated headers and cbe. Paired with my Stillen G3's, I should see some pretty awesome gains, not to mention the sound

Sent from my iPizzle using magic and new fangled science stuff.

cabotgsxr · 03-31-2012, 11:12 AM

Im number 492 and this wait it killing me but i know it will be worth it!
Lth , 18" resinators and stainless can's.

Huan'z · 04-01-2012, 12:14 AM

Yes it's worthy!!!

Sent from my iPhone using Tapatalk

Huan Huynh.

Osiris · 04-02-2012, 04:38 PM

Finally got my FI exhaust installed. My goal was for higher volume and better exhaust note; mission accomplished!! My setup includes Stillen SC, ART Test pipes, and FI catback with 12" resonators. My "other" after market catback was considerably lower in noise volume, but the noise was not a good noise...it was just noise!! Now with the FI catback, it is louder, but in a really good way....this thing sings now!!! I find myself just wanting to drive the car now just to hear the exhaust!! With my "other" catback i never had that desire, lol.

I also noticed that the FI catback weighs less than the one i took off, another benefit!!

I have several friends that own 370's with the FI catback and i always thought it sounded great. I was worried mine wouldn't sound the same or as good being that i had a super charger, but now i'm glad i got this exhaust, sounds awesome!

Thanks Tony!

TerribleONE · 04-02-2012, 04:40 PM

Quote:

Originally Posted by Osiris

Finally got my FI exhaust installed. My goal was for higher volume and better exhaust note; mission accomplished!! My setup includes Stillen SC, ART Test pipes, and FI catback with 12" resonators. My "other" after market catback was considerably lower in noise volume, but the noise was not a good noise...it was just noise!! Now with the FI catback, it is louder, but in a really good way....this thing sings now!!! I find myself just wanting to drive the car now just to hear the exhaust!! With my "other" catback i never had that desire, lol.

I also noticed that the FI catback weighs less than the one i took off, another benefit!!

I have several friends that own 370's with the FI catback and i always thought it sounded great. I was worried mine wouldn't sound the same or as good being that i had a super charger, but now i'm glad i got this exhaust, sounds awesome!

Thanks Tony!

nice man!! puttin those "other" catbacks to shame!

3zworld · 04-02-2012, 05:03 PM

Tony...when you get a chance could you post a new list of where the builds are at ?

Osiris · 04-02-2012, 08:03 PM

Sh@t!!!! Hit exhaust on speed bump

Installed less than a week! Guess that was bound to happen, they are now the lowest hanging items on the car.

370ZilverZ · 04-02-2012, 08:24 PM

Quote:

Originally Posted by F.I. Inc.

Here is exactly how our ordering process works. This is a template that I have created and the only thing that changes is the lead time.

"When you place an order all I require is a $250 deposit. I do not charge the remaining balance until your exhaust is ready to ship. At the time the order is placed I create an actual invoice for you. Then I will email you a PDF copy of that invoice to keep on file. Now all of my exhaust systems are hand built custom right here in house. I do not keep anything in stock. I am very busy and as of right now I am 12-14 weeks out to ship your exhaust once the order is placed! This may possibly be an over estimate, but I would rather under promise & over deliver! Now the lead time does not start until the order is placed and the invoice is created. Once your exhaust is built and ships I will email you your tracking number. I know the lead time might seem like a pain but it goes quick. We take a great deal of pride in what we do! You will receive top notch customer service and quality. I also understand how far you are and how crucial it is to get he right parts the first time. I ensure you that there will be zero packaging mishaps and everything will be as you ordered it. I just hear horror stories about other companies shipping the wrong parts all of the time!

Now I understand that the lead time might really scare you away. Here is what I can promise you. If our system is truly the one you want, the wait is worth it! Please do not force yourself to settle for anything less due to a faster turnaround time.

I think that I have covered everything. If you have any more questions or would like to place an order, please do not hesitate to call me directly..."

Thank you, Tony

Quote:

Originally Posted by 3zworld

Tony...when you get a chance could you post a new list of where the builds are at ?

I hope this helps

reldas · 04-03-2012, 04:48 AM

Finally got all my stuff installed

The mods i got were:

Stillen G3 intakes
Stillen HFCs
F.I CBE 12" res

i got 293HP and 295 lb/ft of torque. i just need to get it upreved now

Dyno:

Video:

http://www.youtube.com/watch?v=EzrO2Z_Mg6I

ccdominic · 04-03-2012, 08:53 AM

Quote:

Originally Posted by reldas

Finally got all my stuff installed

The mods i got were:

Stillen G3 intakes
Stillen HFCs
F.I CBE 12" res

i got 293HP and 295 lb/ft of torque. i just need to get it upreved now

Dyno:

Video:

Nissan 370z with f.i exhaust - YouTube

03-30-2012, 12:00 PM	#8028 (permalink)
gomer_110 A True Z Fanatic Join Date: Aug 2011 Location: Perrysburg, OH Posts: 17,992 Drives: '11 Nismo #528 GM Rep Power: 36941	Just got my non-res installed last night. I was grinning ear to ear the first time I started it up. __________________ '11 370Z Nismo #528 Fast Intentions \| Stillen \| Motordyne \| Uprev \| CSF \| Zspeed \| Z1 Motorsports \| AST \| Swift \| SPC \| SPL \| Whiteline \| Hotchkis \| Bride \| Schroth \| Robispec \| Cusco \| Nismo \| Volk \| Forgestar \| Hoosier \| RJM '17 Titan Bone Stock

03-31-2012, 11:10 AM	#8031 (permalink)
Huck A True Z Fanatic Join Date: Jan 2012 Location: Cocoa, Florida Age: 42 Posts: 5,075 Drives: Pantydropper machine Rep Power: 34	Man all this talk is making me so happy! I can't wait to get mine, got quoted middle of June of non resonated headers and cbe. Paired with my Stillen G3's, I should see some pretty awesome gains, not to mention the sound Sent from my iPizzle using magic and new fangled science stuff. __________________ VLEDS \| Evo-R \| Moddiction \| CF Hood Struts \| F.I. CF CBE & LTH \| Stillen CAI \| NST Pulleys \| UpRev \| Z1 \| M7 \| Status \| Forgestar \| PSS \| Whiteline \| SPL \| SPC \| Kenwood \| Zenclosure \| Kicker \| Alpine Type R

03-31-2012, 11:12 AM	#8032 (permalink)
cabotgsxr Base Member Join Date: Jan 2012 Location: ARKANSAS Posts: 40 Drives: 2009 NISSAN 370Z Rep Power: 14	Im number 492 and this wait it killing me but i know it will be worth it! Lth , 18" resinators and stainless can's. __________________ TEIN MONOFLEX COILOVERS:WHITELINE FRONT AND REAR SWAYS AND ADJUSTABLE ENDLINKS:SPC CAMBER ARMS AND TOE BOLTS:STILLEN GEN III INTAKE:#492 F.I. CATBACK AND LTH "ON ORDER"

04-02-2012, 04:38 PM	#8034 (permalink)
Osiris A True Z Fanatic Join Date: Mar 2009 Location: http://www.cfzclub.com/ Posts: 1,524 Drives: Angry Rep Power: 20	Finally got my FI exhaust installed. My goal was for higher volume and better exhaust note; mission accomplished!! My setup includes Stillen SC, ART Test pipes, and FI catback with 12" resonators. My "other" after market catback was considerably lower in noise volume, but the noise was not a good noise...it was just noise!! Now with the FI catback, it is louder, but in a really good way....this thing sings now!!! I find myself just wanting to drive the car now just to hear the exhaust!! With my "other" catback i never had that desire, lol. I also noticed that the FI catback weighs less than the one i took off, another benefit!! I have several friends that own 370's with the FI catback and i always thought it sounded great. I was worried mine wouldn't sound the same or as good being that i had a super charger, but now i'm glad i got this exhaust, sounds awesome! Thanks Tony! __________________ ^^^^^^^^^Like our Facebook!^^^^^^^^^

04-02-2012, 08:03 PM	#8037 (permalink)
Osiris A True Z Fanatic Join Date: Mar 2009 Location: http://www.cfzclub.com/ Posts: 1,524 Drives: Angry Rep Power: 20	Sh@t!!!! Hit exhaust on speed bump Installed less than a week! Guess that was bound to happen, they are now the lowest hanging items on the car. __________________ ^^^^^^^^^Like our Facebook!^^^^^^^^^

03-30-2012, 01:51 PM	#8029 (permalink)
kensnismo Enthusiast Member Join Date: Jan 2011 Location: north tx Posts: 324 Drives: ZL-1 Rep Power: 15	image.jpg just waiting for a test drive.

03-31-2012, 09:46 AM	#8030 (permalink)
Huan'z Track Member Join Date: Apr 2010 Location: houston,texas Posts: 641 Drives: black 370z 7/AT. Rep Power: 17	Man... When I warm up my car in the morning before go to work. My house shacking!!! I got carbon 18" CBE and res. testpipe! Love the sound of it with injen CAI!

04-01-2012, 12:14 AM	#8033 (permalink)
Huan'z Track Member Join Date: Apr 2010 Location: houston,texas Posts: 641 Drives: black 370z 7/AT. Rep Power: 17	Yes it's worthy!!! Sent from my iPhone using Tapatalk Huan Huynh.

04-02-2012, 05:03 PM	#8036 (permalink)
3zworld Enthusiast Member Join Date: Feb 2012 Location: Georgia Posts: 257 Drives: '09 370z -Boosted Rep Power: 14	Tony...when you get a chance could you post a new list of where the builds are at ?

04-03-2012, 04:48 AM	#8039 (permalink)
reldas Base Member Join Date: Aug 2011 Location: Sydney Posts: 144 Drives: 09 Nissan 370z auto Rep Power: 14	Finally got all my stuff installed The mods i got were: Stillen G3 intakes Stillen HFCs F.I CBE 12" res i got 293HP and 295 lb/ft of torque. i just need to get it upreved now Dyno: Video: http://www.youtube.com/watch?v=EzrO2Z_Mg6I Last edited by reldas; 04-03-2012 at 04:55 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fast girls, Fast cars, One wild ride- Sports Illustrated Swimsuit 2009	Venomous01	Nissan 370Z Photos / Spyshots / Video / Media Gallery	5	01-25-2013 09:27 AM
the Fast and the....	arcticreaver	The Lounge (Off Topic)	1	05-04-2009 04:48 PM
Fast girls, Fast cars, One wild ride- Sports Illustrated Swimsuit 2009	zero	Nissan 370Z Photos / Spyshots / Video / Media Gallery	33	02-26-2009 09:14 PM
Fast Intentions needs prototype!!!	F.I. Inc.	Intake/Exhaust	28	02-16-2009 06:35 AM