Fast Intentions exhaust is here!

XwChriswX · 01-07-2012, 02:28 PM

Quote:

Originally Posted by 2004YZFR1

Do yo need to do aECU reset after you install the exhaust?

It's not absolutely omg mandatory, but it will help. Your best bet is to get a tune once you're done with all the performance mods you want to do. It will give you better results than just an ECU reset.

roplusbee · 01-07-2012, 06:29 PM

I am sure that the ECU would learn corrections without being reset, but it gives a fresh start so that it doesn't take as long (considering you have a lot of miles on your car).

Ages · 01-07-2012, 07:45 PM

F I installed today took 4 hrs with hand tools. Sounds amazing , already have 120 miles on it!!!!

mrcoolguyface · 01-07-2012, 07:55 PM

Quote:

Originally Posted by edub370

hah this looks identical to my 600 i had (swapped to 1000rr color scheme after 50mph low side)

man i miss that thing, but she had to go to get the z..

Nicest looking 600 I ever saw lol. I wasn't so lucky with mine. 150Mph collision on the turnpike with a cab who wanted to be in my lane.

Sent from my DROID BIONIC using Tapatalk

kevr6 · 01-07-2012, 08:40 PM

Quote:

Originally Posted by Ages

F I installed today took 4 hrs with hand tools. Sounds amazing , already have 120 miles on it!!!!

4 hours? Why so long. Took me 35 minutes.

F.I. Inc. · 01-11-2012, 12:01 AM

Quote:

Originally Posted by 2004YZFR1

Do yo need to do aECU reset after you install the exhaust?

You do not need to do a re tune after the exhaust is installed! I have only seen a re tune absolutely necessary with the Stillen Gen III intakes along with our long tube headers and exhaust.

Most other combinations it is not required!

Thanks, Tony

bernardio · 01-11-2012, 04:04 PM

Found the CBE on my doorstep when I got home from work yesterday. The packaging looks super sturdy!! I'm hoping to have time this weekend to do the install.. fingers crossed! Thanks Tony!!

TerribleONE · 01-11-2012, 04:08 PM

Post up some pictures when your done!!

mrcoolguyface · 01-12-2012, 03:16 PM

Hey all,
I currently have the K&N typhoons installed, along with F.I. CBE non res, and non res test pipes. Do you think I would benefit from a custom tune? Or do I even need one?

XwChriswX · 01-12-2012, 03:22 PM

Quote:

Originally Posted by mrcoolguyface

Hey all,
I currently have the K&N typhoons installed, along with F.I. CBE non res, and non res test pipes. Do you think I would benefit from a custom tune? Or do I even need one?

A tune after any mod will help. You may not see a massive boost in power, but it will help your engine run smoother and last longer due to having the fuel maps tuned to the amount of airflow you are increasing now.

XwChriswX · 01-12-2012, 03:23 PM

Tony, any update on my situation?

F.I. Inc. · 01-12-2012, 03:23 PM

Quote:

Originally Posted by mrcoolguyface

Hey all,
I currently have the K&N typhoons installed, along with F.I. CBE non res, and non res test pipes. Do you think I would benefit from a custom tune? Or do I even need one?

Is it necessary, no! Can you benefit from it, yes! You will get the A/F optimal, gain a little more power and more low end torque. You will notice the increase the most in the torque department.

Thanks, Tony

mrcoolguyface · 01-12-2012, 03:39 PM

OK so if one has no idea where a shop is to assist in a "custom tune"... How would I go about locating one? I googled speedshop, tune shop, and everything else I could think of, to no avail LOL... Tony, I replied to the PM as well...

XwChriswX · 01-12-2012, 03:41 PM

Quote:

Originally Posted by mrcoolguyface

OK so if one has no idea where a shop is to assist in a "custom tune"... How would I go about locating one? I googled speedshop, tune shop, and everything else I could think of, to no avail LOL...

The software they'll be using is called Uprev, so you can look for a licensed Uprev tuner in your area. You may need to go out of state... Check the local vendors that are here on the forum... I know NY has a few if you can make the drive. Usually will be a full day for dyno and driving and tuning.

mrcoolguyface · 01-12-2012, 04:54 PM

Quote:

Originally Posted by XwChriswX

The software they'll be using is called Uprev, so you can look for a licensed Uprev tuner in your area. You may need to go out of state... Check the local vendors that are here on the forum... I know NY has a few if you can make the drive. Usually will be a full day for dyno and driving and tuning.

Thanks Chris!

01-07-2012, 06:29 PM	#7127 (permalink)
roplusbee A True Z Fanatic Join Date: Dec 2009 Location: Killeen, TX Posts: 2,360 Drives: 2007 350Z NISMO Rep Power: 23	I am sure that the ECU would learn corrections without being reset, but it gives a fresh start so that it doesn't take as long (considering you have a lot of miles on your car). __________________ 2007 350Z NISMO #0618: Zerolift \| UPREV \| F.I. \| Greddy \| Competition Clutch \| Injector Dynamics \| Aeromotive \| Pioneer \| JL

01-07-2012, 07:45 PM	#7128 (permalink)
Ages Base Member Join Date: Oct 2011 Location: MA Posts: 184 Drives: 11 370Z SP MT Gunmet Rep Power: 14	F I installed today took 4 hrs with hand tools. Sounds amazing , already have 120 miles on it!!!! __________________ F.I.CBE\|F.I.HFC\|20/25mm Z1 Spacers\|CS TypeN Wing(cf)\|CS Diffuser (cf)\|EvoR Fangs(cf)\|EvoR Type2 Front Lip\|Evor Side Blades\|Stillen Gen3\|JDM Fog\|

01-11-2012, 04:04 PM	#7132 (permalink)
bernardio Base Member Join Date: Oct 2011 Location: San Ramon, CA Posts: 45 Drives: 11 370z PW T SP M6 Rep Power: 14	Found the CBE on my doorstep when I got home from work yesterday. The packaging looks super sturdy!! I'm hoping to have time this weekend to do the install.. fingers crossed! Thanks Tony!! __________________ - Bernard *2011 370Z Pearl White Touring Sport 6MT* My Gallery and Build Journal

01-11-2012, 04:08 PM	#7133 (permalink)
TerribleONE A True Z Fanatic Join Date: Jan 2009 Location: Socal Posts: 10,203 Drives: WOT Rep Power: 5850	Post up some pictures when your done!! __________________ 638WHP 541WTQ @ 13.5PSI Build thread

01-12-2012, 03:16 PM	#7134 (permalink)
mrcoolguyface Track Member Join Date: Sep 2011 Location: Philadelphia Posts: 553 Drives: 15 Nissan 370Z GM M6 Rep Power: 15	Custom tune? Hey all, I currently have the K&N typhoons installed, along with F.I. CBE non res, and non res test pipes. Do you think I would benefit from a custom tune? Or do I even need one? __________________ [B] [PROJECT VERONIKA][Sport][K&N-Typhoons][Matte black vinyl roof wrap][MODSHACK inspired custom phone mount][GTR Red button] [F.I. CBE][F.I. NR-TP]

01-12-2012, 03:23 PM	#7136 (permalink)
XwChriswX WFLYIDNNE Join Date: Jul 2009 Location: In The Fastlane Posts: 50,648 Drives: 02 GDB WRX Rep Power: 452	Tony, any update on my situation? __________________ Bonnie - Stage 2, Audio build coming this fall! R.I.P. Abby 3/29/10 - 3/30/14

01-12-2012, 03:39 PM	#7138 (permalink)
mrcoolguyface Track Member Join Date: Sep 2011 Location: Philadelphia Posts: 553 Drives: 15 Nissan 370Z GM M6 Rep Power: 15	OK so if one has no idea where a shop is to assist in a "custom tune"... How would I go about locating one? I googled speedshop, tune shop, and everything else I could think of, to no avail LOL... Tony, I replied to the PM as well... __________________ [B] [PROJECT VERONIKA][Sport][K&N-Typhoons][Matte black vinyl roof wrap][MODSHACK inspired custom phone mount][GTR Red button] [F.I. CBE][F.I. NR-TP]

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fast girls, Fast cars, One wild ride- Sports Illustrated Swimsuit 2009	Venomous01	Nissan 370Z Photos / Spyshots / Video / Media Gallery	5	01-25-2013 10:27 AM
the Fast and the....	arcticreaver	The Lounge (Off Topic)	1	05-04-2009 05:48 PM
Fast girls, Fast cars, One wild ride- Sports Illustrated Swimsuit 2009	zero	Nissan 370Z Photos / Spyshots / Video / Media Gallery	33	02-26-2009 10:14 PM
Fast Intentions needs prototype!!!	F.I. Inc.	Intake/Exhaust	28	02-16-2009 07:35 AM