Fast Intentions exhaust is here!

bigdog1250 · 10-21-2011, 12:48 AM

For those of you who've done the install at home (without a lift), how easy is the entire process? Or if you know of a good build journal that documents it, i'd appreciate a link to it. Thanks!

alejo · 10-21-2011, 02:24 PM

Just got done installing my FI CBE SS w/ 18".. what can i say? I love it!!!! installation took me 1 hr 20 including removing the stock one. WOW Tony and Fast Intentions, you guys are awesome, the product is so perfect, everyone at the shop was like "wow that looks good" or "who makes that" or " thats sounds awesome"...... so on and so on... nothing but good things. Thanks again Tony!!!!!!!!

Exhaust sounds Sooooooo DEEP!!! I love it, and it is only loud when I open it up and not when I'm cruising which is what I was worried about.

Two questions though. 1) when i got home i realized that the right muffler is sticking in more than the drivers side one did any else have this issue?
2) should i reset the ECU (disc the battery for 5 min)?

XwChriswX · 10-21-2011, 06:37 PM

Quote:

Originally Posted by alejo

Just got done installing my FI CBE SS w/ 18".. what can i say? I love it!!!! installation took me 1 hr 20 including removing the stock one. WOW Tony and Fast Intentions, you guys are awesome, the product is so perfect, everyone at the shop was like "wow that looks good" or "who makes that" or " thats sounds awesome"...... so on and so on... nothing but good things. Thanks again Tony!!!!!!!!

Exhaust sounds Sooooooo DEEP!!! I love it, and it is only loud when I open it up and not when I'm cruising which is what I was worried about.

Two questions though. 1) when i got home i realized that the right muffler is sticking in more than the drivers side one did any else have this issue?
2) should i reset the ECU (disc the battery for 5 min)?

1. If you have any left over gaskets for the rear muffler section, try adding them to the left muffler tip to bring it out a little bit more. If you need more, Tony has no problem shipping you some.

With having a 100% in house fabricated exhaust, its hard sometimes to get everything to match up exactly.

2. Yes, absolutely. Disconnect and let sit for a minute or two. Then reconnect, crank and let it sit and idle for about 15 minutes. That will let the ECU relearn the new flow. Then take it out for a good 15-30 minutes of careful driving. No funny business. Then after that you can take it for some hard pulls.

QVu · 10-21-2011, 07:19 PM

Finally pulled the trigger!!! FI CBE SS w/ 18" You will be mine soon enough!!!
Tony is such a helpful guy! With all the positive feedback I had to get one! The Nismo exhaust just wasn't cuttin it!

CC_370z · 10-21-2011, 09:46 PM

Quote:

Originally Posted by QVu

Finally pulled the trigger!!! FI CBE SS w/ 18" You will be mine soon enough!!!
Tony is such a helpful guy! With all the positive feedback I had to get one! The Nismo exhaust just wasn't cuttin it!

Ya Tony is awesome, he doesn't mind answering my question every time I call him.

F.I. Inc. · 10-21-2011, 09:56 PM

Quote:

Originally Posted by QVu

Finally pulled the trigger!!! FI CBE SS w/ 18" You will be mine soon enough!!!
Tony is such a helpful guy! With all the positive feedback I had to get one! The Nismo exhaust just wasn't cuttin it!

We appreciate your business. Glad to have you on our side!

Call me if you have any questions. If we don't talk I will see you on your install date...

Thanks, Tony

m4a1mustang · 10-21-2011, 10:05 PM

Quote:

Originally Posted by bigdog1250

For those of you who've done the install at home (without a lift), how easy is the entire process? Or if you know of a good build journal that documents it, i'd appreciate a link to it. Thanks!

Its not bad, just take your time. I lifted the rear of the car and did the install that way. It makes the cat bolts a little difficult to get to but it's doable.

Glokwork · 10-23-2011, 01:28 AM

Tried to have a little fun tonight and finally get the exhaust on vid but got cut short by security

XwChriswX · 10-23-2011, 01:36 AM

Quote:

Originally Posted by Glokwork

Tried to have a little fun tonight and finally get the exhaust on vid but got cut short by security

Yeah, that will happen if you do it in an enclosed public space...

brucelidat · 10-23-2011, 01:49 PM

so i was gone on vacation for a week. what number are we up to now for people who have had theirs shipped?

F.I. Inc. · 10-23-2011, 03:02 PM

Quote:

Originally Posted by brucelidat

so i was gone on vacation for a week. what number are we up to now for people who have had theirs shipped?

We have shipped up to #388 and sold up to #417.

_CEO_ · 10-23-2011, 05:26 PM

Quote:

Originally Posted by bigdog1250

For those of you who've done the install at home (without a lift), how easy is the entire process? Or if you know of a good build journal that documents it, i'd appreciate a link to it. Thanks!

It took me about 3 and a half hours by myself but could have been easily done in and hour and a half. I jacked up the rear. Just about every other time i crawled under my car I forgot the correct wrench or forgot to bring the bolts or something stupid.

Just read the directions, prepared with the right tools and take your time.

Having a seconds person would have helped a lot. Especially to hand your tools when your under the car.

brucelidat · 10-23-2011, 06:56 PM

Quote:

Originally Posted by F.I. Inc.

We have shipped up to #388 and sold up to #417.

Nice, won't be long now for #398

FPenvy · 10-24-2011, 01:20 PM

Quote:

Originally Posted by XwChriswX

1. If you have any left over gaskets for the rear muffler section, try adding them to the left muffler tip to bring it out a little bit more. If you need more, Tony has no problem shipping you some.

With having a 100% in house fabricated exhaust, its hard sometimes to get everything to match up exactly.

2. Yes, absolutely. Disconnect and let sit for a minute or two. Then reconnect, crank and let it sit and idle for about 15 minutes. That will let the ECU relearn the new flow. Then take it out for a good 15-30 minutes of careful driving. No funny business. Then after that you can take it for some hard pulls.

sooo is it bad if someone was to install the exhaust, reset the ECU, then not be very careful for the first 15-30 minutes? lol

XwChriswX · 10-24-2011, 06:52 PM

Quote:

Originally Posted by FPenvy

sooo is it bad if someone was to install the exhaust, reset the ECU, then not be very careful for the first 15-30 minutes? lol

It's not 'bad'... but just helps with the learning curve lol.

It's kinda like saying to a 3rd grader, okay, score a 1600 on your SAT or we'll cut your legs off...

10-21-2011, 12:48 AM	#6661 (permalink)
bigdog1250 Track Member Join Date: Nov 2008 Location: San Francisco Posts: 846 Drives: 991.2 GT3 Rep Power: 18	For those of you who've done the install at home (without a lift), how easy is the entire process? Or if you know of a good build journal that documents it, i'd appreciate a link to it. Thanks! __________________ 350z / 40th 370z / C6 Z06 / BMW M4 / V10 R8 / C7 Grand Spot / 997.1 GT3 / S2K / Camaro ZL1 / 718 GTS / 991.2 GT3

10-23-2011, 01:28 AM	#6668 (permalink)
Glokwork A True Z Fanatic Join Date: Jun 2011 Location: Roanoke, VA Posts: 2,657 Drives: 11 370Z MB 6MT Rep Power: 22	Tried to have a little fun tonight and finally get the exhaust on vid but got cut short by security __________________ Precision Turbo Tial Turbosmart Fast Intentions Seibon Prosport Advan AD08R HKS Hipermax IV Nismo Evo-R PW:JDM UpRev Pioneer Escort Volk CE28N Top Mount Single Turbo 551whp/482wtq@10psi

10-23-2011, 01:49 PM	#6670 (permalink)
brucelidat A True Z Fanatic Join Date: Jun 2011 Location: temple city, ca Posts: 2,432 Drives: 2011 370z 7AT GM Sp Rep Power: 31	so i was gone on vacation for a week. what number are we up to now for people who have had theirs shipped? __________________ Works Emotion CR Ultimate - FI CBE w/ 18" resonators - Ecutek - eibach sways - Quaife - FI LTH w/race cats - kw v3 - spl - Topgunz SC - 488whp 398trq

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fast girls, Fast cars, One wild ride- Sports Illustrated Swimsuit 2009	Venomous01	Nissan 370Z Photos / Spyshots / Video / Media Gallery	5	01-25-2013 10:27 AM
the Fast and the....	arcticreaver	The Lounge (Off Topic)	1	05-04-2009 05:48 PM
Fast girls, Fast cars, One wild ride- Sports Illustrated Swimsuit 2009	zero	Nissan 370Z Photos / Spyshots / Video / Media Gallery	33	02-26-2009 10:14 PM
Fast Intentions needs prototype!!!	F.I. Inc.	Intake/Exhaust	28	02-16-2009 07:35 AM

10-21-2011, 02:24 PM	#6662 (permalink)
alejo Base Member Join Date: May 2010 Location: Pensacola, FL Posts: 107 Drives: 10 T/S,NAV,MT, 08 R6 Rep Power: 15	Just got done installing my FI CBE SS w/ 18".. what can i say? I love it!!!! installation took me 1 hr 20 including removing the stock one. WOW Tony and Fast Intentions, you guys are awesome, the product is so perfect, everyone at the shop was like "wow that looks good" or "who makes that" or " thats sounds awesome"...... so on and so on... nothing but good things. Thanks again Tony!!!!!!!! Exhaust sounds Sooooooo DEEP!!! I love it, and it is only loud when I open it up and not when I'm cruising which is what I was worried about. Two questions though. 1) when i got home i realized that the right muffler is sticking in more than the drivers side one did any else have this issue? 2) should i reset the ECU (disc the battery for 5 min)?

10-21-2011, 07:19 PM	#6664 (permalink)
QVu Base Member Join Date: Sep 2010 Location: Ventura County, CA Posts: 74 Drives: 2010 Nismo 370z #637 Rep Power: 15	Finally pulled the trigger!!! FI CBE SS w/ 18" You will be mine soon enough!!! Tony is such a helpful guy! With all the positive feedback I had to get one! The Nismo exhaust just wasn't cuttin it!