Fast Intentions exhaust is here!

ccdominic · 02-19-2012, 04:38 PM

kind of a random question, but i'll be getting my TDX in a while, and i was wondering if anyone has taken any measures to protect their exhaust from scraping. i dont live in a lower car friendly town, and i'm dropped on swifts, and i've scraped a few times on speed bumps and such. nothing serious. maybe just the very bottom of the can seeing as they're the most likely to scrap and receive the most damage.

Hermitns · 02-19-2012, 04:55 PM

Quote:

Originally Posted by F.I. Inc.

It is funny how anyone would say that. All you need to do is look at the dyno chart and you will see that there is NO LOW END TORQUE LOSS!

In your case, I am glad that you will be eventually needing new tires! Don't burn them up too fast...

Thanks, Tony

I try not to challenge anyones opinions unless I know for sure they are wrong. I have NEVER installed restrictions in my exhausts to make the car quicker/faster.

XwChriswX · 02-19-2012, 05:00 PM

Quote:

Originally Posted by Roadster4Us

Tony, I can't say enough about quality of the system, from packaging, welds, pipes, and instructions to the overall quality of the system. I have installed quite a few exhausts in my day, all laying on my back in the garage and this system was by far the easiest to install. Thanks for a great high quality system.

Looks good Roadster.

Are those ramps for lowered cars, how much did they set you back if you don't mind me asking? I need a set bad!

Hermitns · 02-19-2012, 05:01 PM

Quote:

Originally Posted by anthonyy

dat graph

I've never really looked closely but that is a nice flat torque curve.

XwChriswX · 02-19-2012, 05:03 PM

Quote:

Originally Posted by Hermitns

I've never really looked closely but that is a nice flat torque curve line.

Fixed.

jpritche · 02-19-2012, 05:09 PM

Quote:

Originally Posted by XwChriswX

Fixed.

I see what you did there

Hermitns · 02-19-2012, 05:37 PM

Quote:

Originally Posted by XwChriswX

Fixed.

I was mulling over a few different replies but it's probably like Leonard arguing with Sheldon. I'll just take my medicine to preempt the swelling of hemorrhoidal tissue.

Roadster4Us · 02-19-2012, 05:37 PM

Quote:

Originally Posted by XwChriswX

Looks good Roadster.

Are those ramps for lowered cars, how much did they set you back if you don't mind me asking? I need a set bad!

They are race ramps along with rollups in the back. They aren't cheap though. Around 300 for the fronts and around a 100 for the rears. Was a nice Christmas gift from the wife.
Race Ramps - Car Ramps and Trailer Ramps.

XBarbarian · 02-19-2012, 07:03 PM

looks awesome Roadster4us!!! w00t!

I noticed you had Nismo CBE listed.. so you had that..but went to FI now? See a bump in sound quality and power?

Has anyone ever been hassled about Warranty with CBE installed?

XwChriswX · 02-19-2012, 07:23 PM

Quote:

Originally Posted by Hermitns

I was mulling over a few different replies but it's probably like Leonard arguing with Sheldon. I'll just take my medicine to preempt the swelling of hemorrhoidal tissue.

Quote:

Originally Posted by Roadster4Us

They are race ramps along with rollups in the back. They aren't cheap though. Around 300 for the fronts and around a 100 for the rears. Was a nice Christmas gift from the wife.
Race Ramps - Car Ramps and Trailer Ramps.

Yeah they do look good, gonna have to add that to the list of things I want for holidays.

Quote:

Originally Posted by XBarbarian

looks awesome Roadster4us!!! w00t!

I noticed you had Nismo CBE listed.. so you had that..but went to FI now? See a bump in sound quality and power?

Has anyone ever been hassled about Warranty with CBE installed?

As long as the issue can't be directly related to the CBE, it shouldn't have any effect on your warranty. Now say if in the midst of installing test pipes, you mess up the threading on your o2 sensor and you take it in to get checked out, they would say you messed it up and that specific part won't be covered under warranty. But if a steering linkage fails, they can't blame that on your CBE install. If they did, I'd just

at them.

F.I. Inc. · 02-19-2012, 07:29 PM

Quote:

Originally Posted by Roadster4Us

Tony, I can't say enough about quality of the system, from packaging, welds, pipes, and instructions to the overall quality of the system. I have installed quite a few exhausts in my day, all laying on my back in the garage and this system was by far the easiest to install. Thanks for a great high quality system.

Thanks man! We are glad that you are enjoying the exhaust! As always your business is greatly appreciated.

Please do not hesitate to call me if you have any questions.

Thanks, Tony

XwChriswX · 02-19-2012, 07:31 PM

Tony, I sent you a reply to your PM. Since you need to be reminded to check for mine!

Roadster4Us · 02-19-2012, 08:02 PM

Quote:

Originally Posted by XBarbarian

looks awesome Roadster4us!!! w00t!

I noticed you had Nismo CBE listed.. so you had that..but went to FI now? See a bump in sound quality and power?

Has anyone ever been hassled about Warranty with CBE installed?

Sound is very different, a much louder growl which is what I wanted. Haven't driven it yet as it started snowing here in Northern VA.

I would never worry about a CBE and warranty, and I am careful with that

Speedy · 02-19-2012, 08:19 PM

Quote:

Originally Posted by Roadster4Us

They are race ramps along with rollups in the back. They aren't cheap though. Around 300 for the fronts and around a 100 for the rears. Was a nice Christmas gift from the wife.
Race Ramps - Car Ramps and Trailer Ramps.

Sorry for semi off topic, but I'll throw in another recommendation for the race ramps. I have them and used them Thursday to help install the splash shields on my Z. Work great. Get the ones that separate to give more working room under the car. Not cheap but WORTH IT.

I have the 56" RR-56-2 ones.

Now I just need to find a pinch weld adapter for the low profile jack.

F.I. Inc. · 02-19-2012, 08:46 PM

Quote:

Originally Posted by Speedy

Sorry for semi off topic, but I'll throw in another recommendation for the race ramps. I have them and used them Thursday to help install the splash shields on my Z. Work great. Get the ones that separate to give more working room under the car. Not cheap but WORTH IT.

I have the 56" RR-56-2 ones.

Now I just need to find a pinch weld adapter for the low profile jack.

I saw these ramps at SEMA last year, they were great. They had a bunch of different sizes for all types of applications!

Tony

02-19-2012, 07:03 PM	#7554 (permalink)
XBarbarian Base Member Join Date: Feb 2012 Location: Tampa Bay, FL Posts: 77 Drives: 12 Nissan 370Z BL AT Rep Power: 14	looks awesome Roadster4us!!! w00t! I noticed you had Nismo CBE listed.. so you had that..but went to FI now? See a bump in sound quality and power? Has anyone ever been hassled about Warranty with CBE installed? __________________ 2012 370Z Touring-Sport-Nav Magnetic Black - 7AT F.I. SS 18" CBE Last edited by XBarbarian; 02-19-2012 at 07:18 PM.

02-19-2012, 07:31 PM	#7557 (permalink)
XwChriswX WFLYIDNNE Join Date: Jul 2009 Location: In The Fastlane Posts: 50,648 Drives: 02 GDB WRX Rep Power: 452	Tony, I sent you a reply to your PM. Since you need to be reminded to check for mine! __________________ Bonnie - Stage 2, Audio build coming this fall! R.I.P. Abby 3/29/10 - 3/30/14

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fast girls, Fast cars, One wild ride- Sports Illustrated Swimsuit 2009	Venomous01	Nissan 370Z Photos / Spyshots / Video / Media Gallery	5	01-25-2013 09:27 AM
the Fast and the....	arcticreaver	The Lounge (Off Topic)	1	05-04-2009 04:48 PM
Fast girls, Fast cars, One wild ride- Sports Illustrated Swimsuit 2009	zero	Nissan 370Z Photos / Spyshots / Video / Media Gallery	33	02-26-2009 09:14 PM
Fast Intentions needs prototype!!!	F.I. Inc.	Intake/Exhaust	28	02-16-2009 06:35 AM

02-19-2012, 04:38 PM	#7546 (permalink)
ccdominic Track Member Join Date: Jul 2011 Location: Corpus Christi, TX Posts: 615 Drives: Built LS1/T56 RX7 FD Rep Power: 15	kind of a random question, but i'll be getting my TDX in a while, and i was wondering if anyone has taken any measures to protect their exhaust from scraping. i dont live in a lower car friendly town, and i'm dropped on swifts, and i've scraped a few times on speed bumps and such. nothing serious. maybe just the very bottom of the can seeing as they're the most likely to scrap and receive the most damage.