Fast Intentions exhaust is here!

Methodical4u · 08-11-2011, 01:10 AM

Yeah, it does indeed sound very good! Is it 91 octane out there where you are?

XwChriswX · 08-11-2011, 02:03 AM

Quote:

Originally Posted by Methodical4u

35 seems like it's very good for that set-up IMO anyway. With some G3's and pulleys you might get a fair amount more.

I would think that the LTH's and the CBE would be REALLY loud lol. 18" resonators i'm guessing? and yeah I will check out the vids thanks!

Yeah, I have the NST pulleys, just waiting on the belt for the install, then looking to get some Stillens, or maybe the Takeda's if they get them out soon enough... We shall see, then a Tune!

Quote:

Originally Posted by Methodical4u

Yeah, it does indeed sound very good! Is it 91 octane out there where you are?

Yeah, 91 here but I put in the STP Octane Booster, so hopefully that gives me another point or two

V8Killer · 08-11-2011, 07:27 AM

Quote:

Originally Posted by XwChriswX

Yeah, I have the NST pulleys, just waiting on the belt for the install, then looking to get some Stillens, or maybe the Takeda's if they get them out soon enough... We shall see, then a Tune!

Yeah, 91 here but I put in the STP Octane Booster, so hopefully that gives me another point or two

Ya LOL don't waste your money on those things they are such a scam.

birdmanx1 · 08-11-2011, 08:07 AM

Quote:

Originally Posted by V8Killer

Ya LOL don't waste your money on those things they are such a scam.

What things? NST pulleys or Octane Booster or intake?

Ron · 08-11-2011, 09:12 AM

^ I agree

mtaxelson · 08-11-2011, 12:10 PM

everyones getting a little crazy lately...yikes...

F.I. Inc. · 08-11-2011, 01:28 PM

Just to chime in while I have a minute or two.

The change is not a design change. All we did in the build process is raise the front of the mufflers about 3/8". It is hardly even noticeable to the eye and will not fit the car any differently. It gives just a tad more ground clearance. About the last 50 systems that have shipped have had this change.

Now I need to get back to work and keep building everyones system. We are plugging away and I should have an update within the next few days.

Everyones patience is greatly appreciated as always...

Thank you, Tony

tjlazer · 08-11-2011, 01:36 PM

I can imagine if they announced the change right away, all preorders would of wanted the new design. LOL Oh well I could care less, I only scraped once and it was my fault for taking the speed bump at an angle...

Methodical4u · 08-11-2011, 02:09 PM

I think most know that they will likely scrape at some point, especially if lowered. This is why i'll never do it... I like the look, but not all of the headaches that it comes with. I'm lucky to be small enough that I can change my oil without even jacking the car up now

Footloose301 · 08-11-2011, 02:13 PM

I HAD A DREAM!

...that Fast Intentions was able to produce exhaust systems faster

...Exhausts were able to be shipped that same day!

...and the people with less patience, such as myself, would stop being stubborn and just order the exhaust already

Methodical4u · 08-11-2011, 02:43 PM

Quote:

Originally Posted by Footloose301

I HAD A DREAM!

...that Fast Intentions was able to produce exhaust systems faster

...Exhausts were able to be shipped that same day!

...and the people with less patience, such as myself, would stop being stubborn and just order the exhaust already

Order it then! lol Oh and on a side note... I have an Asian Fiancee

XwChriswX · 08-11-2011, 06:15 PM

Quote:

Originally Posted by Footloose301

I HAD A DREAM!

...that Fast Intentions was able to produce exhaust systems faster

...Exhausts were able to be shipped that same day!

...and the people with less patience, such as myself, would stop being stubborn and just order the exhaust already

Hopefully they'll wait to assassinate you until after your exhaust is installed... lol

FL 4Motion · 08-11-2011, 07:22 PM

Quote:

Originally Posted by Methodical4u

I'm just wondering guys.. for those of you who did the F.I. TDX as a first mod did you really feel the extra power? I know that the power is about 20 whp, just wondering about the butt dyno.

Quote:

Originally Posted by XwChriswX

I can't really say for just the CBE as I had my headers and CBE installed at the same time, but for my opinion, yes there was a definite gain in power on the butt dyno from that, and the real dyno confirmed a 35hp gain.

/\ same here, FI LTHs and CBE put on at the same time, dynoed with only those mods and gained +30 whp over my baseline dyno done on the same dyno. (waited about 500 miles post install to let everything "break in" first).

Glokwork · 08-11-2011, 07:36 PM

This vid from a fellow member is my inspiration to remain patient...I'm not gonna lie I watch this a couple times a day

IMO this vid does the best job of showing how beast this thing sounds

ENJOY!

XwChriswX · 08-11-2011, 07:43 PM

Quote:

Originally Posted by Glokwork

This vid from a fellow member is my inspiration to remain patient...I'm not gonna lie I watch this a couple times a day

IMO this vid does the best job of showing how beast this thing sounds

ENJOY!

Sweet vid, sucks the wind gets in to a few bits. Sound wicked. Although I think he should have done a doughnut in the parking lot.

Only thing of note is he has a nismo, with a slightly different tune, I doubt it would have any effect on the outcome of the video, but just something to ponder... Does a Nismo/Base sound different in anyones opinions?

08-11-2011, 01:28 PM	#7 (permalink)
F.I. Inc. The370Z.com Sponsor Join Date: Feb 2009 Location: Simi Valley, CA Posts: 2,989 Drives: 2010 GT-R/2007 F-250 Rep Power: 686	Just to chime in while I have a minute or two. The change is not a design change. All we did in the build process is raise the front of the mufflers about 3/8". It is hardly even noticeable to the eye and will not fit the car any differently. It gives just a tad more ground clearance. About the last 50 systems that have shipped have had this change. Now I need to get back to work and keep building everyones system. We are plugging away and I should have an update within the next few days. Everyones patience is greatly appreciated as always... Thank you, Tony __________________ *Follow us on Facebook: Fast Intentions Inc.* Phone: (805) 522-FAST (3278) Email: tony@fastintentions.com www.fastintentions.com "FUELED BY PASSION"

08-11-2011, 01:36 PM	#8 (permalink)
tjlazer A True Z Fanatic Join Date: Dec 2009 Location: Tacoma Age: 53 Posts: 2,496 Drives: Z34, R35 Rep Power: 20	I can imagine if they announced the change right away, all preorders would of wanted the new design. LOL Oh well I could care less, I only scraped once and it was my fault for taking the speed bump at an angle... __________________ 2009 370Z Monterey Blue,Nismo Conversion,RE-11's, K&N Typhoon intakes,Blue Kickplates,Homelink,FI 18" CBE,ERZ HFCs,Hotchkis sways, Swift Spec-R, EVO-R Highwing, UPREV

08-11-2011, 02:13 PM	#10 (permalink)
Footloose301 A True Z Fanatic Join Date: Apr 2010 Location: Naples, FL Posts: 2,659 Drives: 40th Rep Power: 22	I HAD A DREAM! ...that Fast Intentions was able to produce exhaust systems faster ...Exhausts were able to be shipped that same day! ...and the people with less patience, such as myself, would stop being stubborn and just order the exhaust already __________________ 2010 40th Anniversary 370Z Last edited by Footloose301; 08-11-2011 at 02:17 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fast girls, Fast cars, One wild ride- Sports Illustrated Swimsuit 2009	Venomous01	Nissan 370Z Photos / Spyshots / Video / Media Gallery	5	01-25-2013 09:27 AM
the Fast and the....	arcticreaver	The Lounge (Off Topic)	1	05-04-2009 04:48 PM
Fast girls, Fast cars, One wild ride- Sports Illustrated Swimsuit 2009	zero	Nissan 370Z Photos / Spyshots / Video / Media Gallery	33	02-26-2009 09:14 PM
Fast Intentions needs prototype!!!	F.I. Inc.	Intake/Exhaust	28	02-16-2009 06:35 AM

08-11-2011, 01:10 AM	#1 (permalink)
Methodical4u A True Z Fanatic Join Date: Jun 2011 Location: Maryland Posts: 1,393 Drives: 11 370 6mt pw w/sp Rep Power: 16	Yeah, it does indeed sound very good! Is it 91 octane out there where you are?

08-11-2011, 09:12 AM	#5 (permalink)
Ron A True Z Fanatic Join Date: Oct 2010 Location: Houston, TX Posts: 3,009 Drives: TT '11 PW Nismo #113 Rep Power: 22	^ I agree

08-11-2011, 12:10 PM	#6 (permalink)
mtaxelson Enthusiast Member Join Date: Feb 2011 Location: New Jersey Posts: 311 Drives: "Two Brake Pedals" Rep Power: 15	everyones getting a little crazy lately...yikes...

08-11-2011, 02:09 PM	#9 (permalink)
Methodical4u A True Z Fanatic Join Date: Jun 2011 Location: Maryland Posts: 1,393 Drives: 11 370 6mt pw w/sp Rep Power: 16	I think most know that they will likely scrape at some point, especially if lowered. This is why i'll never do it... I like the look, but not all of the headaches that it comes with. I'm lucky to be small enough that I can change my oil without even jacking the car up now

08-11-2011, 07:36 PM	#14 (permalink)
Glokwork A True Z Fanatic Join Date: Jun 2011 Location: Roanoke, VA Posts: 2,657 Drives: 11 370Z MB 6MT Rep Power: 22	This vid from a fellow member is my inspiration to remain patient...I'm not gonna lie I watch this a couple times a day IMO this vid does the best job of showing how beast this thing sounds ENJOY!