Ark exhaust broke

TeamARK · 09-24-2012, 01:04 PM

Quote:

Originally Posted by Staples

No they shouldn't... They should dent at the most. Those aren't the proper flex pipes to use in this situation since that area sits low. I'm lowered and have hit the flex pipes multiple times, minus a few scratches and a small dent (didn't affect flow), it came out fine.

This is what should be used...

As you can see the whole area is cross layered inside, no "wrinkling" or "filler".

You also missed the other stainless steel flex pipe images found next to this on google images.

Does the DCRH have an inner shell in their flex pipe ? - 8th Generation Honda Civic Forum

This also helps the lines from collasping.

Alex

imwazn · 09-24-2012, 02:39 PM

That makes sense to me actually. If the pipes didn't flex, this would have been much worse.

On another note, I spoke with the engineering company which is in charge of the road. He told me the bump was just two inches at its highest point. This is complete and utter ********... Also, he said (without ever seeing my car, nor knowing what car I drive) "you guys always drop your cars to the ground... I bet you couldn't even go through a parking lot without having the same exact problem." He then proceeded to offer to have a state trooper come and measure the height of my car to see if I comply with state law. He said I must be at least four inches off of the ground (I'm five inches off). As soon as he calls back I will gladly accept his offer.

1st · 09-24-2012, 02:50 PM

Ya if your stock height your all good then. What an idiot I would have cut him off and told him bring porky on down. Here in the state of California you need to have your headlights at 21 inches from the ground to have a legal lowered car height. God this guys a real moron what if you drove a Vette or a Ferrari then what would you still be considered you guys. Also this guy obviously is not a car guy if he showed you no empathy.

TeamARK · 09-24-2012, 02:58 PM

Yea. Let me know how that goes. You can call me directly and I will do my best to make it so that you don't have to fork out too much out of your pocket. Either way your staying with an ARK exhaust so we will treat you like family.

DEpointfive0 · 09-24-2012, 05:34 PM

I'd go to a muffler shop and have them weld some straight pipes in... Shouldn't cost more than like $80, and that's a high IMO...
If you didn't have flex pipes you probably would've just scraped? No?
The Stillen I know doesn't have any flex pipes, which WAS weird to me, but whatever, all the rubber hangers take the abuse and sock and vibration and movement from the engine

Edit: NOT trying to bash Ark in any way, the Ark Grip V2 is one of THE NICEST exhausts I have heard for the Z, I wish I knew about it before I bought my exhaust

Staples · 09-24-2012, 06:16 PM

I stand corrected

imwazn · 09-26-2012, 05:14 PM

Quote:

Originally Posted by TeamARK

Yea. Let me know how that goes. You can call me directly and I will do my best to make it so that you don't have to fork out too much out of your pocket. Either way your staying with an ARK exhaust so we will treat you like family.

thanks, I'll be in touch once I get everything sorted out.

TeamARK · 09-26-2012, 06:46 PM

Great! Let me know.

ARK PERFORMANCE INC
13737 Amarillo Ave
Chino CA 91710
M-F : 8:30am-5:30pm PST
Main Phone: 909 590 1275

Alex

mantella87 · 09-28-2012, 07:13 PM

Never heard of this before. I have the ARK Grip V2 and I'm lowered on Swifts. I go over speed bumps perfectly fine...

imwazn · 09-28-2012, 08:31 PM

Quote:

Originally Posted by mantella87

Never heard of this before. I have the ARK Grip V2 and I'm lowered on Swifts. I go over speed bumps perfectly fine...

I was fine over speed bumps. I went back and measured it with the supervisor of the engineering company and the bump was four inches at its highest. Going 25 over that isn't really good...

Fearless_Z · 11-05-2012, 09:58 PM

I just found this post. And im having sort if the same problem except mine hasnt broke. My exhaust is laying on the brace underneath the car, rubbing against it and what not. I juat got it installed today. Any solutions? God i hope so.

Bandit_Kaine · 11-06-2012, 08:58 AM

Quote:

Originally Posted by Fearless_Z

I just found this post. And im having sort if the same problem except mine hasnt broke. My exhaust is laying on the brace underneath the car, rubbing against it and what not. I juat got it installed today. Any solutions? God i hope so.

Just needs to be readjusted.. All the bolts and nuts need to be loosened, adjusted, held in place and then retightened.. I believe you should start from the back to the front (not sure)

09-24-2012, 02:50 PM	#18 (permalink)
1st A True Z Fanatic Join Date: Jul 2012 Location: I 80 Biz U.S. 50 Posts: 1,710 Drives: Platinum Z Rep Power: 1616	Ya if your stock height your all good then. What an idiot I would have cut him off and told him bring porky on down. Here in the state of California you need to have your headlights at 21 inches from the ground to have a legal lowered car height. God this guys a real moron what if you drove a Vette or a Ferrari then what would you still be considered you guys. Also this guy obviously is not a car guy if he showed you no empathy. Last edited by 1st; 09-24-2012 at 02:52 PM.

09-24-2012, 02:58 PM	#19 (permalink)
TeamARK Track Member Join Date: Jul 2009 Location: CHINO Posts: 957 Drives: Black 350z/370z Rep Power: 17	Yea. Let me know how that goes. You can call me directly and I will do my best to make it so that you don't have to fork out too much out of your pocket. Either way your staying with an ARK exhaust so we will treat you like family. MagmaRed370z likes this.

09-24-2012, 06:16 PM	#21 (permalink)
Staples Track Member Join Date: Sep 2010 Location: Baltimore, MD Posts: 546 Drives: '08 Infiniti G37s Rep Power: 16	I stand corrected __________________ '08 Infiniti G37s - Forced Induction Fed

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HELP Broke DOWN!!	ANMVQ	Forced Induction	108	03-24-2013 06:13 AM
Yep. Broke My Rib.	CBRich	The Lounge (Off Topic)	18	09-05-2010 08:33 AM
U.S. Says Toyota Broke The Law	FuszNissan	The Lounge (Off Topic)	24	04-08-2010 11:48 AM
Z Broke Down :(	FuszNissan	Nissan 370Z General Discussions	318	09-15-2009 07:58 AM
my Z broke down	sideburnZ	Nissan 370Z General Discussions	32	05-26-2009 10:33 AM

09-24-2012, 02:39 PM	#17 (permalink)
imwazn Base Member Join Date: Aug 2011 Location: Virginia Posts: 187 Drives: 11 370Z Base, M/T Rep Power: 14	That makes sense to me actually. If the pipes didn't flex, this would have been much worse. On another note, I spoke with the engineering company which is in charge of the road. He told me the bump was just two inches at its highest point. This is complete and utter ********... Also, he said (without ever seeing my car, nor knowing what car I drive) "you guys always drop your cars to the ground... I bet you couldn't even go through a parking lot without having the same exact problem." He then proceeded to offer to have a state trooper come and measure the height of my car to see if I comply with state law. He said I must be at least four inches off of the ground (I'm five inches off). As soon as he calls back I will gladly accept his offer.

09-24-2012, 05:34 PM	#20 (permalink)
DEpointfive0 Premium Member Bitches Join Date: Jan 2012 Location: SoCal Posts: 14,824 Drives: a lot Rep Power: 17151	I'd go to a muffler shop and have them weld some straight pipes in... Shouldn't cost more than like $80, and that's a high IMO... If you didn't have flex pipes you probably would've just scraped? No? The Stillen I know doesn't have any flex pipes, which WAS weird to me, but whatever, all the rubber hangers take the abuse and sock and vibration and movement from the engine Edit: NOT trying to bash Ark in any way, the Ark Grip V2 is one of THE NICEST exhausts I have heard for the Z, I wish I knew about it before I bought my exhaust

09-26-2012, 06:46 PM	#23 (permalink)
TeamARK Track Member Join Date: Jul 2009 Location: CHINO Posts: 957 Drives: Black 350z/370z Rep Power: 17	Great! Let me know. ARK PERFORMANCE INC 13737 Amarillo Ave Chino CA 91710 M-F : 8:30am-5:30pm PST Main Phone: 909 590 1275 Alex

09-28-2012, 07:13 PM	#24 (permalink)
mantella87 Track Member Join Date: Jun 2011 Location: Sacramento, CA Posts: 590 Drives: 2011 Z34 MT Rep Power: 15	Never heard of this before. I have the ARK Grip V2 and I'm lowered on Swifts. I go over speed bumps perfectly fine...

11-05-2012, 09:58 PM	#26 (permalink)
Fearless_Z Base Member Join Date: Sep 2012 Location: Center Point, LA Posts: 208 Drives: 2014 Nissan Z Nismo Rep Power: 13	I just found this post. And im having sort if the same problem except mine hasnt broke. My exhaust is laying on the brace underneath the car, rubbing against it and what not. I juat got it installed today. Any solutions? God i hope so.