Is this common for the 370Z exhaust flanges/bolts to rust?

nmjaxx9 · 10-21-2012, 09:25 PM

Quote:

Originally Posted by forza370z

You not gonna see it unless you often invite people to check out the underneath of your car or you drive your car upside down on the street.

Or people are curious enough to look under your car when all their underbodys are the same. no wait they arent they are worse cuz some people drive in the snow.

Luke · 10-22-2012, 12:56 PM

my 2012 is the same and only a few months old.

jcosta79 · 10-22-2012, 01:28 PM

Stop looking down there.

Problem solved.

.c2 · 10-27-2012, 03:50 PM

Same thing with mine, the shop couldn't take off the bolts when they were swapping out my exhaust so they had to take off the whole thing in one piece except for the mufflers :s

omm370z · 10-27-2012, 05:42 PM

IT is normal based on the quality that is used on the exhaust. Change the exhaust and the problem will be solved

gq4life1345 · 11-08-2012, 11:41 AM

I had the same issue with my new 2012 370z and according to the service manager at the local nissan dealer, its normal. This is was his explaination: "The rusting of the solid steel flanges are a normal condition with that type of untreated metal.Unfortunatly the manufacturing process does not use any treatment on that solid flange.If the flange was a stamped steel flange the metal would be treated because it would be much thinner and could rust out after a number of years without treatment.By using the solid flange type it would allow more clamping force to seal the two components and last longer than a stamped steel type because of the thickness." And his suggestion is to paint it with some high heat rust paint like Tremclad available at homedepot, lowes etc

10-22-2012, 01:28 PM	#18 (permalink)
jcosta79 A True Z Fanatic Join Date: Jul 2012 Location: N/A Posts: 1,430 Drives: N/A Rep Power: 15	Stop looking down there. Problem solved. __________________ 2012 PW NISMO #0559 - GT Spec Brace Kit - Swift Springs - ARK TP & Invidia CBE K&N Intake - UpRev Tune - 15mm Z1 Spacers & Studs - StopTech Slotted Rotors & SS Lines - ZSpeed CMAK with Stage 2 Clutch and Lightweight Flywheel

10-27-2012, 03:50 PM	#19 (permalink)
.c2 Enthusiast Member Join Date: May 2012 Location: BC Canada Posts: 414 Drives: 09 370z MB 6MT Rep Power: 13	Same thing with mine, the shop couldn't take off the bolts when they were swapping out my exhaust so they had to take off the whole thing in one piece except for the mufflers :s __________________ Instagram // Build Thread Amuse / Mines / Bride / Momo / KW / Hotchkis / Motordyne / Invidia / Injen

10-27-2012, 05:42 PM	#20 (permalink)
omm370z Track Member Join Date: Jul 2012 Location: Perú Posts: 671 Drives: The Amuse! Rep Power: 14	IT is normal based on the quality that is used on the exhaust. Change the exhaust and the problem will be solved __________________ ITEMS FOR FREE! PROJECT FAST TURTLE!

11-08-2012, 11:41 AM	#21 (permalink)
gq4life1345 Base Member Join Date: Nov 2012 Location: canada Posts: 2 Drives: 2012 370z Rep Power: 13	Had the same problem I had the same issue with my new 2012 370z and according to the service manager at the local nissan dealer, its normal. This is was his explaination: "The rusting of the solid steel flanges are a normal condition with that type of untreated metal.Unfortunatly the manufacturing process does not use any treatment on that solid flange.If the flange was a stamped steel flange the metal would be treated because it would be much thinner and could rust out after a number of years without treatment.By using the solid flange type it would allow more clamping force to seal the two components and last longer than a stamped steel type because of the thickness." And his suggestion is to paint it with some high heat rust paint like Tremclad available at homedepot, lowes etc

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
torque specs for exhaust bolts?	harman.khinda	Intake/Exhaust	6	07-21-2020 04:18 AM
370z common problems	pyrrhus17	Nissan 370Z General Discussions	48	07-03-2014 04:52 PM
Nismo Exhaust (Rust Issue)	NismoZ370	Nismo 370Z	10	12-15-2011 07:54 AM
For Sale : Base Open Differential Complete with stub flanges 10k miles	chuckd05	Parts for sale (Private Classifieds)	7	08-04-2010 07:31 PM
How to break loose the exhaust bolts	spearfish25	Intake/Exhaust	14	09-14-2009 01:07 PM

10-22-2012, 12:56 PM	#17 (permalink)
Luke Base Member Join Date: Apr 2012 Location: Australia Posts: 111 Drives: 2012 370Z 6MT Black Rep Power: 13	my 2012 is the same and only a few months old.