aem eti

Redz34 · 07-23-2012, 08:41 AM

Does anyone have the aem eti intake and opinions please?

MattP725 · 07-23-2012, 12:50 PM

Quote:

Originally Posted by Redz34

Does anyone have the aem eti intake and opinions please?

My opinion is post this in the "intake" section... my second opinion is search and find out.

Redz34 · 07-24-2012, 07:09 AM

Im new to this so I didn't know where i was posting.

FireDan50 · 07-24-2012, 09:29 AM

I came across this and I just bought/installed this intake so I'll chime in. First of all I don't have any pre or post install dyno measurements. Install was a little lengthy; took me a couple hours and I wasn't able to finish everything due to my 25-row oil cooler. I wasn't able to re-install the washer fluid bottle because my oil cooler was in the way.

It sounds about the same. It feels like it pulls a little more. Car is a little more fun to drive. Don't expect significant gains. According to my "Ultra Guage", intake air temps aren't bad when the car is moving and are just a few degrees higher than OEM. I purchased mainly for the cosmetic appeal and adding something different to the engine bay. Having the increased airflow is nice. Would I buy it again? Probably not. I'd save money towards forced induction. I'll post pics later when I take some.

The BlueMax · 07-24-2012, 10:54 PM

Quote:

Originally Posted by FireDan50

I came across this and I just bought/installed this intake so I'll chime in. First of all I don't have any pre or post install dyno measurements. Install was a little lengthy; took me a couple hours and I wasn't able to finish everything due to my 25-row oil cooler. I wasn't able to re-install the washer fluid bottle because my oil cooler was in the way.

It sounds about the same. It feels like it pulls a little more. Car is a little more fun to drive. Don't expect significant gains. According to my "Ultra Guage", intake air temps aren't bad when the car is moving and are just a few degrees higher than OEM. I purchased mainly for the cosmetic appeal and adding something different to the engine bay. Having the increased airflow is nice. Would I buy it again? Probably not. I'd save money towards forced induction. I'll post pics later when I take some.

I have to agree with you, I'm going to buy the Typoon setup because it should be an easy install, the bright blue intake hoses look good but you still have to run the stock airbox

SS_Firehawk · 07-25-2012, 12:41 AM

With intakes and pulleys, I gaind 17whp on top of my existing mods. Mods were LTH's, HFC, and exhaust. The gains are mostly up top in the power band, but can be seen in the mid range as well. I have no complaints or second thoughts.

07-23-2012, 08:41 AM	#1 (permalink)
Redz34 Base Member Join Date: Feb 2012 Location: San Diego, CA Posts: 2 Drives: 12 Nissan 370Z SP M6 Rep Power: 13	aem eti Does anyone have the aem eti intake and opinions please? Last edited by Redz34; 07-23-2012 at 08:49 AM.

07-25-2012, 12:41 AM	#6 (permalink)
SS_Firehawk Premium Member Join Date: Oct 2011 Location: Tampa Posts: 4,142 Drives: 13' Magma Red Nismo Rep Power: 7335	With intakes and pulleys, I gaind 17whp on top of my existing mods. Mods were LTH's, HFC, and exhaust. The gains are mostly up top in the power band, but can be seen in the mid range as well. I have no complaints or second thoughts. __________________ Old Car:GTM TSC'd 550whp / 410lbft tq @ 11.88PSI New Car: Under Construction

07-24-2012, 07:09 AM	#3 (permalink)
Redz34 Base Member Join Date: Feb 2012 Location: San Diego, CA Posts: 2 Drives: 12 Nissan 370Z SP M6 Rep Power: 13	Im new to this so I didn't know where i was posting.

07-24-2012, 09:29 AM	#4 (permalink)
FireDan50 Track Member Join Date: Mar 2012 Location: San Antonio Posts: 714 Drives: '09 370Z PW M6 Rep Power: 19	I came across this and I just bought/installed this intake so I'll chime in. First of all I don't have any pre or post install dyno measurements. Install was a little lengthy; took me a couple hours and I wasn't able to finish everything due to my 25-row oil cooler. I wasn't able to re-install the washer fluid bottle because my oil cooler was in the way. It sounds about the same. It feels like it pulls a little more. Car is a little more fun to drive. Don't expect significant gains. According to my "Ultra Guage", intake air temps aren't bad when the car is moving and are just a few degrees higher than OEM. I purchased mainly for the cosmetic appeal and adding something different to the engine bay. Having the increased airflow is nice. Would I buy it again? Probably not. I'd save money towards forced induction. I'll post pics later when I take some.