Help!!

thatscrayZ · 07-05-2012, 01:15 AM

i was taking out my hps intake tubes to switch back to stock and i broke, what seems to be the resonator or something on the driver side intake... does anyone know where i can get another piece or do i have to go to the dealer on this one????

mattleegee · 07-05-2012, 01:18 AM

glue?

Trips · 07-05-2012, 01:37 AM

You could try Krazy glue or try to find a small 2'' piece of pipe of some kind that will fit inside halfway thru creating a new place for the hose to be installed on with a possible clamp. Courtesy Nissan may have that part but I personally don't know the name or part #

Hopefully those options help.

thatscrayZ · 07-06-2012, 11:20 AM

thanks triple, i got a small aluminum pipe, grinded it down, and wedged it between the two broken ends until they met(to use as support) and glued it together. your small pipe idea gave me a great idea thanks again!

kenny's 370z · 07-06-2012, 11:23 AM

i eliminated that crap with some 90 degree pvc elbows.had to get a piece of straight hose for the passenger side.drivers side oem hose, intake to valve cover, fit perfectly.

djtodd · 07-06-2012, 12:09 PM

Also IIRC, Z1 makes silicon hoses to replace those boxes on both sides.

cc370z · 07-07-2012, 01:52 AM

Quote:

Originally Posted by kenny's 370z

i eliminated that crap with some 90 degree pvc elbows.had to get a piece of straight hose for the passenger side.drivers side oem hose, intake to valve cover, fit perfectly.

^^ This ^^ i think the 90 degree was all of $2 at auto zone. My passenger hasn't broken yet.

07-05-2012, 01:37 AM	#3 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,732 Drives: 🔰 Rep Power: 10	You could try Krazy glue or try to find a small 2'' piece of pipe of some kind that will fit inside halfway thru creating a new place for the hose to be installed on with a possible clamp. Courtesy Nissan may have that part but I personally don't know the name or part # Hopefully those options help. __________________

07-06-2012, 11:23 AM	#5 (permalink)
kenny's 370z Base Member Join Date: Jun 2012 Location: TN Age: 59 Posts: 243 Drives: 2012 frontier sv v6 Rep Power: 13	i eliminated that crap with some 90 degree pvc elbows.had to get a piece of straight hose for the passenger side.drivers side oem hose, intake to valve cover, fit perfectly. Last edited by kenny's 370z; 07-06-2012 at 11:27 AM.

07-05-2012, 01:18 AM	#2 (permalink)
mattleegee Base Member Join Date: Jun 2012 Location: Kent, WA Posts: 72 Drives: 2014 4runner TE Rep Power: 13	glue?

07-06-2012, 11:20 AM	#4 (permalink)
thatscrayZ Base Member Join Date: May 2011 Location: washington Posts: 19 Drives: '10 370z 6spd MT Rep Power: 14	thanks triple, i got a small aluminum pipe, grinded it down, and wedged it between the two broken ends until they met(to use as support) and glued it together. your small pipe idea gave me a great idea thanks again!

07-06-2012, 12:09 PM	#6 (permalink)
djtodd Track Member Join Date: Jun 2012 Location: Lexington, SC Posts: 932 Drives: 2012 Nismo TT Rep Power: 3398	Also IIRC, Z1 makes silicon hoses to replace those boxes on both sides.