CNT HFC fitment issue

NewtoZ's5 · 09-25-2012, 04:16 PM

Sounds like it will be Berk, Kinetix, or Z1 for me. Thanks OP

ERZperformance · 06-15-2012, 06:02 PM

I think everyone here can read that in all of our post or respond to your inquiry, we had never use any word or sentence to attack your knowledge. Vice versa, you had nothing but offensive words to say about us.

Quote:

Originally Posted by Chi_g35

As I stated to you when I called and in the PM i just sent you. MAN UP!!! I cant stand a man or a company that cant tell the truth & you are blatantly lying! I didnt contact you expecting anything, well maybe to speak to someone who was 1/2 way intelligent & ethical. Your still avoiding the issue, a picture is worth 1000 words & have 3. Ive proved my point... Can you say the same!

Here is your PM to me & my reply!

First of all be mindful of who your speaking too! I am not some little kid or some noob on these forums, had your company stood by your product you would have asked direct questions, been apologetic. I was extremely offended at your attempt to deflect responsibility just as you are doing now. The pictures speak for themselves you can clearly see that the flange is not level. Did you address that fact no.... You attempted to insinuate that I dont know what you products look like. How the hell do you know I havent seen your products in person? No where in the entire conversation did you take the initiative to resolve my concern. I expected a more intelligent response, not " oh so what are you looking for ". Had you bothered to listen to me when I called or even read the thread. ALL OF THIS CAME OUT WHEN BOTH CATS HAD A LEAK! WHICH MEANS I PAID TO HAVE THEM INSTALLED. AND PAID TO HAVE THEM REMOVED, GRIND DOWN, SANDED AND REINSTALLED. You could have easily offered me another set for exchange, maybe even investigate my concern. Or how about an apology and that that you stand by your product. Even your message to me now continues your piss poor customer service. THIS IS EXACTLY WHY THE FORUMS EXIST! POSITIVE & NEGATIVE FEEDBACK THAT HAS A LASTING EFFECT. NEXT TIME A CUSTOMER CALLS ESPECIALLY ONE YOU OFFERED A SPONSORSHIP TO BEFORE, I WOULD ADVISE YOU HANDLE IT BETTER. OH AND MAYBE A LITTLE DAMAGE CONTROL SINCE THIS THREAD HAS 180+ VIEWS SO FAR.

FEEL FREE TO COME FIND ME ON THE MYG37 FORUMS I POSTED THE SAME THREAD THERE JUST LIKE I TOLD YOU ON THE PHONE I WOULD. DID YOU THINK I WAS JOKING....

diesel11679 · 09-25-2012, 08:00 AM

Thank you OP for posting this. I've been researching HFC's for my Nismo. Seems like I'll look elsewhere.

Chico370Z · 10-15-2012, 01:20 PM

dang...any update to this?

fuct · 10-15-2012, 03:18 PM

just to stir the pot up but my CNT TP's had the exact same bent flange! It even looked worse. I still installed them only for the O2 bung to break off while driving allowing my O2sensor to drag along the ground.

CNT res TP's broken!

Chico370Z · 10-16-2012, 02:59 PM

Quote:

Originally Posted by fuct

just to stir the pot up but my CNT TP's had the exact same bent flange! It even looked worse. I still installed them only for the O2 bung to break off while driving allowing my O2sensor to drag along the ground.

CNT res TP's broken!

did they resolve this?

Dixnot · 11-04-2012, 03:24 PM

glad i read this and more thanks OP and anyone else who had problems. i had hfcs added to shopping cart. whew saved me the trouble

mleroux · 11-13-2012, 12:00 AM

Just bought a set of CNT hfcs for my 350z directly from the company and have a terrible exhaust leak. Same exact problem as everyone else, uneven or warped flanges. I took a picture with a straight edge on the flange, almost a 1/8" gap!!! Still waiting to hear back from CNT...

cheshirecat · 11-13-2012, 06:14 AM

looks like it's going to be best just to take it somewhere and have them grind it down flat based on the history of other posters :/

09-25-2012, 04:16 PM	#1 (permalink)
NewtoZ's5 Base Member Join Date: Jul 2012 Location: Sachse, Texas Age: 50 Posts: 128 Drives: 12 GM T/S/Navi Rep Power: 13	Sounds like it will be Berk, Kinetix, or Z1 for me. Thanks OP __________________ 2012 GM 370Z Touring/Sport- Swift Spec-R, 20mm spacers, K&N Typoons, Z1 HFC's, Invidia Gemini, Kinetix camber, SPC toe, UpRev 310WHP/256TQ 2004 RYP S2000- Enkei RPF1's(blK)w/Dunlop Star Specs, Swift Spec-R, I/H/HFC

09-25-2012, 08:00 AM	#3 (permalink)
diesel11679 Base Member Join Date: Sep 2012 Location: Akron Age: 38 Posts: 42 Drives: 2013 370Z Nismo Rep Power: 13	Thank you OP for posting this. I've been researching HFC's for my Nismo. Seems like I'll look elsewhere. __________________ 2013 Nismo #0030 Magnetic Black, GT-R push button, tint all around. 2009 Honda Fit Sport 5MT Storm Silver Metallic (DD)

10-15-2012, 01:20 PM	#4 (permalink)
Chico370Z Base Member Join Date: Oct 2009 Location: East Bay, CA Posts: 233 Drives: 09 370Z Touring Rep Power: 16	dang...any update to this? __________________ 04 Nissan Sentra SpecV: Brembos, Nismo Intake/Exhaust/Short Shifter, Eibach Sportlines, ES MMI - SOLD / / / 09 Nissan 370Z Touring: Invidia Gemini Exhaust, ERZ HFC, GTM 25 Row Cooler, Z1 Tubes, and K&N Drop Ins

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Issue with exhaust fitment on a nismo	crystalline	Intake/Exhaust	2	11-15-2011 06:31 PM
Nismo stock exhaust on roadster fitment issue, rubber mount broken, need advice	Quartermaine	Intake/Exhaust	12	11-14-2011 04:57 AM
Has anyone been able to fix the Ark fitment issue?	babbagandu	Intake/Exhaust	7	11-07-2011 04:25 PM
Help with fitment	Seth G	Wheels & Tires	4	03-08-2010 11:36 PM
Help with VR-G2 fitment	JJ-NISMO	Wheels & Tires	8	03-02-2010 07:10 AM

10-15-2012, 03:18 PM	#5 (permalink)
fuct A True Z Fanatic Join Date: May 2009 Location: Sugar Land Posts: 3,692 Drives: 97' Ranger :) Rep Power: 24	just to stir the pot up but my CNT TP's had the exact same bent flange! It even looked worse. I still installed them only for the O2 bung to break off while driving allowing my O2sensor to drag along the ground. CNT res TP's broken!

11-04-2012, 03:24 PM	#7 (permalink)
Dixnot Base Member Join Date: Aug 2012 Location: bedford Posts: 76 Drives: 09 Banana Rep Power: 13	glad i read this and more thanks OP and anyone else who had problems. i had hfcs added to shopping cart. whew saved me the trouble

11-13-2012, 12:00 AM	#8 (permalink)
mleroux Base Member Join Date: Apr 2011 Location: San Antonio, TX Posts: 1 Drives: 04 350z Rep Power: 14	Just bought a set of CNT hfcs for my 350z directly from the company and have a terrible exhaust leak. Same exact problem as everyone else, uneven or warped flanges. I took a picture with a straight edge on the flange, almost a 1/8" gap!!! Still waiting to hear back from CNT...

11-13-2012, 06:14 AM	#9 (permalink)
cheshirecat A True Z Fanatic Join Date: Jan 2009 Location: Florida Posts: 1,428 Drives: N54 135i Rep Power: 293	looks like it's going to be best just to take it somewhere and have them grind it down flat based on the history of other posters :/