Fast Intentions exhaust is here! (continued)

Stssjester · 10-24-2014, 12:04 AM

No drilling/cutting necessary. This is a complete out of the box install. SERIOUSLY EASY AS WELL! MAD DAPS TO TONY FOR AN AMAZING PRODUCT AND CUSTOMER SERVICE!

Sales@F.I. Inc. · 10-24-2014, 01:37 AM

Quote:

Originally Posted by Spooler

Quick question. Where the exhaust if welded together at the mid-pipe. Do you drill/cut a hole between both bank like an H-pipe?

If I'm understanding your question correctly: Yes, the area where the two tubes are welded together is completely opened up to allow passage from one exhaust bank to the other. We utilize this X Pipe technology over a traditional H Pipe designs because it is much more efficient at balancing exhaust pulses between the left and right bank throughout the entire RPM range. This more efficient range of scavenging leads to more power and torque.

No cutting or welding is done by the customer. All of our TDX Cat Back Exhausts are ready to bolt on straight out of the box with simple hand tools. I hope this answers your question.

- Kevin

Spooler · 10-24-2014, 10:31 PM

Quote:

Originally Posted by Sales@F.I. Inc.

Yes, the area where the two tubes are welded together is completely opened up to allow passage from one exhaust bank to the other. We utilize this X Pipe technology over a traditional H Pipe designs because it is much more efficient at balancing exhaust pulses between the left and right bank throughout the entire RPM range.

- Kevin

Yeap, you got what I meant.

Thanks,

No211sBruh · 10-26-2014, 05:01 PM

#1038 Installed

Outstanding fitment, no shimming was necessary.

Installation was extremely easy took about 1.5 hours, only bump I ran into was removing the evap canister cover. After a couple beers and 5 minutes of looking at it- I realized that my 2014 sport didn't have one lol.

My Z FINALLY sounds like its supposed to!

Thanks to everyone at F.I I will be a returning customer for sure.

240se · 10-27-2014, 10:56 AM

Quote:

Originally Posted by No211sBruh

Installation was extremely easy took about 1.5 hours, only bump I ran into was removing the evap canister cover. After a couple beers and 5 minutes of looking at it- I realized that my 2014 sport didn't have one lol.

My 2012 base+sport didn't have the heat shield for the evap canister either. I wonder which years came with them.

240se · 10-27-2014, 11:24 AM

Quote:

Originally Posted by Spooler

Quick question. Where the exhaust if welded together at the mid-pipe. Do you drill/cut a hole between both bank like an H-pipe?

There is an oval cut out in the X pipes, approximately 3"x1.5".

zcar_dad · 10-27-2014, 07:57 PM

#1029 (SS with 18") was installed over the weekend. No problems, fitment is great, sound is outstanding, butt dyno feels terrific!!! Thanks Tony and F.I. for a great product!!!

z0219 · 10-27-2014, 08:07 PM

sorry, im really new to Z's and exhaust system, i have one quick question, i live in socal, i was wondering if this exhaust legal in CA?　i have the greedy cold air intakes, with stock exhaust. with this exhaust will be too loud ? im really looking for something thats really makes decent sound. sooooorry >.<

cooltoy · 10-27-2014, 08:44 PM

Well since FI is based in California, I would figure that they would make an exhaust that would be legal in their state, but I could be wrong.

Sounds like you would want 18" res.

Stssjester · 10-27-2014, 10:10 PM

Quote:

Originally Posted by z0219

sorry, im really new to Z's and exhaust system, i have one quick question, i live in socal, i was wondering if this exhaust legal in CA?i have the greedy cold air intakes, with stock exhaust. with this exhaust will be too loud ? im really looking for something thats really makes decent sound. sooooorry >.<

Where do you live at? I am in San Diego and have a non resonated Carbon Fiber catback exhaust with high flow cats (im registered in texas) if you are local, I can let you listen to it.

z0219 · 10-27-2014, 11:48 PM

Quote:

Quote:
Originally Posted by z0219 View Post
sorry, im really new to Z's and exhaust system, i have one quick question, i live in socal, i was wondering if this exhaust legal in CA?i have the greedy cold air intakes, with stock exhaust. with this exhaust will be too loud ? im really looking for something thats really makes decent sound. sooooorry >.<
Where do you live at? I am in San Diego and have a non resonated Carbon Fiber catback exhaust with high flow cats (im registered in texas) if you are local, I can let you listen to it.
Like
__________________
Stillen Gen 3, LED conversion for all lights, FI CF CBE w/HFC's, Aerojacket Fenders, and Plastidipped Everything!

yes sir, im in socal, im around san gabriel, rosemead area. which around 2 hours drive from you. and i would listen to it in person. did u ever get in trouble with cops?

Stssjester · 10-29-2014, 03:31 PM

Nah, I dont have to abide by California smog standards because of where my car is registered.

cooltoy · 11-04-2014, 04:29 PM

Got complemented by the dealership tech on the sound of my FI today.

axmea? · 11-04-2014, 04:53 PM

Quote:

Originally Posted by cooltoy

Got complemented by the dealership tech on the sound of my FI today.

They do sound good.

Lol I was complimented by a cop here in Northridge, CA. Probably from the same precinct where another officer stopped next to me and questioned me about my missing front plates.

Spooler · 11-04-2014, 10:07 PM

I will be in the market next year for a NR set. Can hardly hear to car stock.

10-24-2014, 12:04 AM	#4306 (permalink)
Stssjester Base Member Join Date: May 2014 Location: San Diego Posts: 47 Drives: 2013 Nismo Rep Power: 11	No drilling/cutting necessary. This is a complete out of the box install. SERIOUSLY EASY AS WELL! MAD DAPS TO TONY FOR AN AMAZING PRODUCT AND CUSTOMER SERVICE! Sales@F.I. Inc. likes this. __________________ Stillen Gen 3, LED conversion for all lights, FI CF CBE w/HFC's, Aerojacket Fenders, and Plastidipped Everything!

10-26-2014, 05:01 PM	#4309 (permalink)
No211sBruh Base Member Join Date: Sep 2014 Location: Fife, WA Posts: 12 Drives: 2014 Black Coupe Rep Power: 11	#1038 Installed Outstanding fitment, no shimming was necessary. Installation was extremely easy took about 1.5 hours, only bump I ran into was removing the evap canister cover. After a couple beers and 5 minutes of looking at it- I realized that my 2014 sport didn't have one lol. My Z FINALLY sounds like its supposed to! Thanks to everyone at F.I I will be a returning customer for sure. TerribleONE, F.I. Inc., Sales@F.I. Inc. and 1 others like this. __________________ 2014 MB sport, injen CAI, Stillen Sways, F.I. Tdx non res cf, 2006 TomTom.

10-27-2014, 07:57 PM	#4312 (permalink)
zcar_dad Base Member Join Date: May 2010 Location: Kansas City, MO Posts: 126 Drives: 2009 Nismo 370 #67 Rep Power: 15	#1029 (SS with 18") was installed over the weekend. No problems, fitment is great, sound is outstanding, butt dyno feels terrific!!! Thanks Tony and F.I. for a great product!!! Sales@F.I. Inc. likes this. __________________ 2009 Nismo 370Z #0067, Brillant Silver

10-27-2014, 08:44 PM	#4314 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,971 Drives: 14 PW 370Z S/T MT Rep Power: 243722	Well since FI is based in California, I would figure that they would make an exhaust that would be legal in their state, but I could be wrong. Sounds like you would want 18" res. __________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang.

10-29-2014, 03:31 PM	#4317 (permalink)
Stssjester Base Member Join Date: May 2014 Location: San Diego Posts: 47 Drives: 2013 Nismo Rep Power: 11	Nah, I dont have to abide by California smog standards because of where my car is registered. __________________ Stillen Gen 3, LED conversion for all lights, FI CF CBE w/HFC's, Aerojacket Fenders, and Plastidipped Everything!

10-27-2014, 08:07 PM	#4313 (permalink)
z0219 Base Member Join Date: Oct 2011 Location: california Posts: 15 Drives: 2012-370z-White-Auto Rep Power: 14	sorry, im really new to Z's and exhaust system, i have one quick question, i live in socal, i was wondering if this exhaust legal in CA?　i have the greedy cold air intakes, with stock exhaust. with this exhaust will be too loud ? im really looking for something thats really makes decent sound. sooooorry >.<

11-04-2014, 04:29 PM	#4318 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,971 Drives: 14 PW 370Z S/T MT Rep Power: 243722	Got complemented by the dealership tech on the sound of my FI today. F.I. Inc., axmea? and Sales@F.I. Inc. like this. __________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang.

11-04-2014, 10:07 PM	#4320 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,799 Drives: 2013 Nismo 370z Rep Power: 2684392	I will be in the market next year for a NR set. Can hardly hear to car stock. F.I. Inc., cooltoy and Sales@F.I. Inc. like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fast Intentions exhaust is here!	F.I. Inc.	Intake/Exhaust	8307	06-09-2012 03:32 PM
Fast Intentions exhaust just ordered	Jmigs81	Intake/Exhaust	32	02-12-2012 04:39 PM
Fast Intentions Exhaust	Mark Gomez	Intake/Exhaust	13	05-19-2011 08:51 PM
ARK Exhaust vs. Fast Intentions	dnasty370z	Intake/Exhaust	61	09-06-2010 07:25 PM