Fast Intentions exhaust is here! (continued)

genesis2012

Lol thought about that.

But the stock height hurts my eyes.

__________________
FI Non-Resonated | Eibach Springs | 20MM Spacers | Blacked-Out Wing, Emblems & Diffuser | Powder Coated Dark Gloss Grey Wheels | GT-R Push Start

LSP1995

I assume you have nice roads in Orange County. Here in Louisiana, it's like driving on goat paths. I'm leaving the suspension alone. Don't really care to deal with damaging my Z because of potholes, uneven surfaces, or crap falling off of vehicles. At the stock height, a recap torn away from an 18-wheeler tire would be a nightmare for the front end.

__________________
'13 Sport 7AT | Stillen Gen. 3| FI 18" Res & RHFC's | Uprev | Crime Guard security system | Pioneer AVIC-X920BT | JL XD700/5 | JL component speakers | MTX Audio 10" sub

genesis2012

^^

OC roads are immaculate

__________________
FI Non-Resonated | Eibach Springs | 20MM Spacers | Blacked-Out Wing, Emblems & Diffuser | Powder Coated Dark Gloss Grey Wheels | GT-R Push Start

LSP1995

I'm jealous!

__________________
'13 Sport 7AT | Stillen Gen. 3| FI 18" Res & RHFC's | Uprev | Crime Guard security system | Pioneer AVIC-X920BT | JL XD700/5 | JL component speakers | MTX Audio 10" sub

bkjunk

I think it's time to move, or maybe get a little apartment on the down low for your baby to stay at.

Also, doesn't FI say their exhaust hangs no lower than the stock exhaust. So the issue may still exist if you go back to stock.

genesis2012

^^

Yes I will probably scrape with my stock

__________________
FI Non-Resonated | Eibach Springs | 20MM Spacers | Blacked-Out Wing, Emblems & Diffuser | Powder Coated Dark Gloss Grey Wheels | GT-R Push Start

HngNgn19

Genesis, Noooooooooo! don't do it! I'm not sure how fast you need to leave your neighborhood, but I'm sure you can take an extra minute or minute and a half to angle and clear all those four speed bumps! Don't do it man, you will regret it!

cooltoy

See if a shop can weld on little angle plates to protect the edge.

genesis2012

How would they do that?

__________________
FI Non-Resonated | Eibach Springs | 20MM Spacers | Blacked-Out Wing, Emblems & Diffuser | Powder Coated Dark Gloss Grey Wheels | GT-R Push Start

genesis2012

Dude I just took a ride down the street and I'm hurting inside. Feels like pure orgasm

__________________
FI Non-Resonated | Eibach Springs | 20MM Spacers | Blacked-Out Wing, Emblems & Diffuser | Powder Coated Dark Gloss Grey Wheels | GT-R Push Start

HngNgn19

Also this, I believe I read somewhere that Tony at FI welded some skid plates to the edge of the Cans to keep them from being damaged, you should look into this. You'll be scraping, but at least it's not your Cans!

genesis2012

^^

Just talked to the exhaust shop. They told me it's undoable

__________________
FI Non-Resonated | Eibach Springs | 20MM Spacers | Blacked-Out Wing, Emblems & Diffuser | Powder Coated Dark Gloss Grey Wheels | GT-R Push Start

cooltoy

Why not. All you need is an angle bracket to be attached to the SS part of the can, or the pipe and then angle across the CF. At least in my mind that's how I'd do it. Obviously you can't weld to the CF.

HngNgn19

Try hitting up Tony @ FI, maybe he has some insight to the skid plates. Can't hurt, worth a try I say. Just don't talk to him too long, he still needs to fabricate my CBE

genesis2012

Hahaha

__________________
FI Non-Resonated | Eibach Springs | 20MM Spacers | Blacked-Out Wing, Emblems & Diffuser | Powder Coated Dark Gloss Grey Wheels | GT-R Push Start