Fast Intentions exhaust is here! (continued)

Smartace3 · 01-20-2014, 12:24 AM

#883 Still waiting on the call.. Hopefully the call comes next week..

LSP1995 · 01-20-2014, 12:32 AM

Quote:

Originally Posted by Smartace3

#883 Still waiting on the call.. Hopefully the call comes next week..

I'm 892. Just wanted to see if I could get an idea of where FI was in production without having to bother Tony.

F.I. Inc. · 01-20-2014, 01:24 AM

Quote:

Originally Posted by V1H

Hi Tony, thanks for your helpful explanations.

I still have some questions.
I notice a distinctive design difference between your 2.5" and 3" TDX.
The 3" seems to use 3" TP in place of the downpipes, with the catalysers (100cell) now moved downstream into the lead pipes. On the 2.5" the cats still sit in the downpipes (factory positions), the lead pipes are thus straight (or resonated).

I wonder why the cats moved into the lead pipes. Is it just more temperature-friendly? And since the 3" uses testpipes only, does the O2 bung extension on the TPs still prevent CEL?

I'd be all up for going 3", not 2.5" if the only difference is better Turbo spool.
Any sound differences considering both non-resonated?

Most importantly I still wonder whether the 100cell cats pass M.O.T. here in the U.K.
Problem is I don't know how modern cars are emission tested (I've had an OBD1 Prelude before) and my Z is still too new for M.O.T

Do they actually sniff the emissions on the tailpipe (then the 100cells would surely fail?) or does the ECU merely give a pass/fail in which case one could trick the ECU into satisfaction?

Don't mention it!

There is no difference in design between the 2.5" and 3" versions. The 2.5" version can also have a full down pipe starting at the exhaust side of the turbo. What we do is start the down pipe in 3" and than smoothly taper it down to 2.5". You can run the 100 cell cats in either system. They are moved down further in the exhaust stream to reduce the amount of heat that they will see. They will hold up much better in that location and being that they are 100 cell, they will do very little to hinder performance. Mainly they quiet down the exhaust note and help reduce the raw fuel smell coming from the tail pipes.

It is a safe bet to say that these cats will not pas your M.O.T. inspection considering that they are a race cat.

The "J" bend anti foulers are in place to trick out the ECU and keep the CEL off.

In the end, the 3" will be the way to go if you want to maximize turbo spool and reduce restriction. Achieving that zero psi back pressure on the exhaust side is imperative to maximizing performance.

Think that this covers it for now.

Thanks, Tony

YzGyz · 01-20-2014, 02:23 AM

IS there an option to have the 2.5'' tdx setup with the cats further away like in the 3'' version? I'm thinking ahead in case I get your system and also have plans for some kind of FI. I understand the the 3'' is preferred but from my understanding, the 2.5'' may be better for torque due to some back pressure. I'm just not a fan of gas fumes and would rather not have to small it or inhale it if I don't have to. Sure I sacrifice some performance but that's something I'm willing to do.

V1H · 01-20-2014, 03:54 AM

Quote:

Originally Posted by YzGyz

IS there an option to have the 2.5'' tdx setup with the cats further away like in the 3'' version? I'm thinking ahead in case I get your system and also have plans for some kind of FI. I understand the the 3'' is preferred but from my understanding, the 2.5'' may be better for torque due to some back pressure. I'm just not a fan of gas fumes and would rather not have to small it or inhale it if I don't have to. Sure I sacrifice some performance but that's something I'm willing to do.

Yes I think Tony is saying you could run the 2.5" TDX with the 100 cell cats placed in the lead pipes just like the 3" does. You'd have to select the 3" downpipe though. The 2.5" downpipes only come cat'ed (300 cell).

Quote:

Originally Posted by F.I. Inc.

Don't mention it!
It is a safe bet to say that these cats will not pas your M.O.T. inspection considering that they are a race cat.

Ok, as much as I'd like to maximize performance, I'd have to go with the 2.5" then, in order to keep the 300 cell cats for M.O.T.
Either way, it's gonna be a sweet exhaust with stunning looks

Cheers

YzGyz · 01-20-2014, 05:35 AM

Quote:

Originally Posted by V1H

Yes I think Tony is saying you could run the 2.5" TDX with the 100 cell cats placed in the lead pipes just like the 3" does. You'd have to select the 3" downpipe though. The 2.5" downpipes only come cat'ed (300 cell).

Ok, as much as I'd like to maximize performance, I'd have to go with the 2.5" then, in order to keep the 300 cell cats for M.O.T.
Either way, it's gonna be a sweet exhaust with stunning looks

Cheers

Hummm, I'm a little lost as I'm a F I noob. The kit I was looking at was Boosted Performance since out was made comparable with the TDX 2.5". I think that kit uses the stock "down pipe"?? .. Ahh I don't know what I'm talking about.... Summertime full me in please.

YzGyz · 01-20-2014, 05:37 AM

Quote:

Originally Posted by V1H

Yes I think Tony is saying you could run the 2.5" TDX with the 100 cell cats placed in the lead pipes just like the 3" does. You'd have to select the 3" downpipe though. The 2.5" downpipes only come cat'ed (300 cell).

Ok, as much as I'd like to maximize performance, I'd have to go with the 2.5" then, in order to keep the 300 cell cats for M.O.T.
Either way, it's gonna be a sweet exhaust with stunning looks

Cheers

Hummm, I'm a little lost as I'm a F I noob. The kit I was looking at was Boosted Performance since out was made comparable with the TDX 2.5". I think that kit uses the stock "down pipe"?? .. Ahh I don't know what I'm talking about.... Somebody fill me in please.

equalme · 01-24-2014, 02:14 AM

Anybody have a good idea how much louder the fi 18" is compared to the berk cbe?

I currently have the berk cbe and the tone is mild at low rpms, screams at high rpm / wot, and very mild cruising.

jooonnn · 01-24-2014, 08:24 AM

Quote:

Originally Posted by equalme

Anybody have a good idea how much louder the fi 18" is compared to the berk cbe?

I currently have the berk cbe and the tone is mild at low rpms, screams at high rpm / wot, and very mild cruising.

Other than cold start i think its a very mild sounding exhaust once broken in. Definitely screams at high rpms but not as loud as the non resonated options due to the lower tone (our ears are usually more sensitive to higher pitches when it comes to cars).

Sent from my iPhone using Tapatalk

exsanity · 01-24-2014, 09:20 AM

#884 - Your exhaust system is just about completed and will be ready to ship tomorrow!

Darkii · 01-24-2014, 04:36 PM

That's great! I'm #885 so hopefully shipped soon too. Haven't got the email yet

Oh well, few more days won't hurt haha

Sent from my Nexus 4 using Tapatalk

Smartace3 · 01-24-2014, 06:10 PM

#883- Got the call yesterday. Just waiting on the tracking number now!!

Smartace3 · 01-24-2014, 09:33 PM

#883- Shipped!! Arriving Tuesday!!

cooltoy · 01-24-2014, 11:57 PM

Nice.

Crap, I guess I better start figuring out how I am going to come up with the rest of the money.

F.I. Inc. · 01-25-2014, 10:16 AM

Quote:

Originally Posted by Darkii

That's great! I'm #885 so hopefully shipped soon too. Haven't got the email yet

Oh well, few more days won't hurt haha

Sent from my Nexus 4 using Tapatalk

Your exhaust is completed and waiting pick up from UPS-SCS. I will email you all of the tracking info on Monday.

Thanks, Tony

01-24-2014, 02:14 AM	#3323 (permalink)
equalme Track Member Join Date: Feb 2013 Location: Kansas City Posts: 656 Drives: RCF Rep Power: 13	Anybody have a good idea how much louder the fi 18" is compared to the berk cbe? I currently have the berk cbe and the tone is mild at low rpms, screams at high rpm / wot, and very mild cruising. __________________ ---Get your door handles painted---

01-24-2014, 09:20 AM	#3325 (permalink)
exsanity Premium Member Join Date: Oct 2013 Location: Middle Tennessee Posts: 10,499 Drives: you mad.. Rep Power: 3700	#884 - Your exhaust system is just about completed and will be ready to ship tomorrow! __________________ \| F.I. NonRes Carbon CBE \| F.I. High Flow Cats \| Hotchkis Sway Bars \| KW Variant 3 \| SPL Suspension Parts \|

01-24-2014, 06:10 PM	#3327 (permalink)
Smartace3 Base Member Join Date: Aug 2013 Location: Sacramento, CA Posts: 25 Drives: 2010 370z Coupe Rep Power: 12	#883- Got the call yesterday. Just waiting on the tracking number now!! LSP1995 likes this.

01-24-2014, 09:33 PM	#3328 (permalink)
Smartace3 Base Member Join Date: Aug 2013 Location: Sacramento, CA Posts: 25 Drives: 2010 370z Coupe Rep Power: 12	#883- Shipped!! Arriving Tuesday!! VQZ34nismo likes this.

01-24-2014, 11:57 PM	#3329 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,971 Drives: 14 PW 370Z S/T MT Rep Power: 243722	Nice. Crap, I guess I better start figuring out how I am going to come up with the rest of the money. F.I. Inc. likes this.

01-20-2014, 12:24 AM	#3316 (permalink)
Smartace3 Base Member Join Date: Aug 2013 Location: Sacramento, CA Posts: 25 Drives: 2010 370z Coupe Rep Power: 12	#883 Still waiting on the call.. Hopefully the call comes next week..

01-20-2014, 02:23 AM	#3319 (permalink)
YzGyz A True Z Fanatic Join Date: Jun 2013 Location: Houston Posts: 1,449 Drives: 2010 Nismo Rep Power: 63	IS there an option to have the 2.5'' tdx setup with the cats further away like in the 3'' version? I'm thinking ahead in case I get your system and also have plans for some kind of FI. I understand the the 3'' is preferred but from my understanding, the 2.5'' may be better for torque due to some back pressure. I'm just not a fan of gas fumes and would rather not have to small it or inhale it if I don't have to. Sure I sacrifice some performance but that's something I'm willing to do.

01-24-2014, 04:36 PM	#3326 (permalink)
Darkii Base Member Join Date: Jul 2010 Location: Aus Posts: 13 Drives: 370z Rep Power: 15	That's great! I'm #885 so hopefully shipped soon too. Haven't got the email yet Oh well, few more days won't hurt haha Sent from my Nexus 4 using Tapatalk

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fast Intentions exhaust is here!	F.I. Inc.	Intake/Exhaust	8307	06-09-2012 03:32 PM
Fast Intentions exhaust just ordered	Jmigs81	Intake/Exhaust	32	02-12-2012 04:39 PM
Fast Intentions Exhaust	Mark Gomez	Intake/Exhaust	13	05-19-2011 08:51 PM
ARK Exhaust vs. Fast Intentions	dnasty370z	Intake/Exhaust	61	09-06-2010 07:25 PM