Fast Intentions exhaust is here! (continued)

kfull · 12-18-2013, 07:31 PM

Quote:

Originally Posted by VQZ34nismo

Well guys yesterday I pulled the trigger and called tony, I can only say his customer service is top notch, great person to deal with.
I went with 12 inch resonators & carbon fiber canisters #904

The wait begins!!!!

also, wow up to #904, I think I was 747 when I ordered last spring..congrats on all the sales FI!

jlw2546 · 12-18-2013, 09:29 PM

Installed my non resonated hfc's and Carbon fiber CBE with 12 inch resonators on Monday and Tuesday. Yes, I took my time. Lol. Installation of the hfc's were a bit frustrating. Those bolts were a bitch to get loose. Had to use 1/2 drive stuff. Also had to remove the steering knuckle to get the big stuff on the bolt. The CBE went on perfectly and fit and finish is top notch. I also installed an R2C intake as well. Went for first real drive today and all I can say is that it sounds amazing. It is loud. I think it is louder inside the car than outside the car though. Not a bad thing. Nissan definitely needs to work on their sound deadening material. No rasp at all but there is definitely drone, especially at around 50 to 60 mph. Guess i will just have to go faster. The hiss is annoying but I can live with it. No hiss as long as your on the gas. I will be on the gas a lot. Great product Tony. Anyone thinking of purchasing this product it is well worth it.

andy_meng1024 · 12-19-2013, 03:27 AM

Tony I'd like the old logo instead of letters as well for #871. I also PMd you about changing the spec. Thanks.

Andy

cooltoy · 12-19-2013, 11:17 AM

Quote:

Originally Posted by andy_meng1024

Tony I'd like the old logo instead of letters as well for #871. I also PMd you about changing the spec. Thanks.

Andy

OK. I am confused.

I thought the old logo was the letters - "FAST INTENTIONS". and the new is just the stylized FI.

F.I. Inc. · 12-19-2013, 02:32 PM

Quote:

Originally Posted by jlw2546

Installed my non resonated hfc's and Carbon fiber CBE with 12 inch resonators on Monday and Tuesday. Yes, I took my time. Lol. Installation of the hfc's were a bit frustrating. Those bolts were a bitch to get loose. Had to use 1/2 drive stuff. Also had to remove the steering knuckle to get the big stuff on the bolt. The CBE went on perfectly and fit and finish is top notch. I also installed an R2C intake as well. Went for first real drive today and all I can say is that it sounds amazing. It is loud. I think it is louder inside the car than outside the car though. Not a bad thing. Nissan definitely needs to work on their sound deadening material. No rasp at all but there is definitely drone, especially at around 50 to 60 mph. Guess i will just have to go faster. The hiss is annoying but I can live with it. No hiss as long as your on the gas. I will be on the gas a lot. Great product Tony. Anyone thinking of purchasing this product it is well worth it.

Great to hear that you have it installed and are happy. I want to touch on a few points to put the mind at ease.

1) The Drone will subside about 10% once everything is broken in. At about 250 miles or maybe less, you will see it quiet down somewhat.

2) The hiss is normal under deceleration. Thank Nissan and the VVEL for that! To some it is annoying and most are impartial. Give it time, it will grow on you and you will not even notice it after time. It is definitely more noticeable with aftermarket cats opposed to stock cats!

Thanks for the support and Happy Holidays.

Tony

F.I. Inc. · 12-19-2013, 02:33 PM

Quote:

Originally Posted by kfull

The wait begins!!!!

also, wow up to #904, I think I was 747 when I ordered last spring..congrats on all the sales FI!

Thank you! Hard work and some good breaks along the way helps out. Couldn't of made it this far without our customers support and loyalty.

Thanks, tony

F.I. Inc. · 12-19-2013, 02:42 PM

Quote:

Originally Posted by cooltoy

OK. I am confused.

I thought the old logo was the letters - "FAST INTENTIONS". and the new is just the stylized FI.

I want to clear this up publicly because I only touched on it in a few pm's and emails.

The "FI Branding Logo" is currently not available. It was only sent out to a handful of customers because we ran out of our standard tips and all we had left were blanks. I decided to try something different since we were etching them by hand in house. It is a time consuming process so I did the branding logo to speed us up and get us by until our new shipment of tips came in.

That being said, I may offer it in the near future as an upgraded option, however at a price. It would be a $120+ upgrade to have custom etching done on your exhaust tips. What that means is we can etch just about anything you want in them (within reason). You would have to send the logo to us preferably in vector format and we can shrink it down and modify it to go on the tip. Keep in mind, there will be a design charge on top of the engraving fee.

Thanks, Tony

cooltoy · 12-19-2013, 04:33 PM

Thanks Tony. I am good with the normal logo.

jaybulls · 12-19-2013, 07:18 PM

Quote:

Originally Posted by jlw2546

Installed my non resonated hfc's and Carbon fiber CBE with 12 inch resonators on Monday and Tuesday. Yes, I took my time. Lol. Installation of the hfc's were a bit frustrating. Those bolts were a bitch to get loose. Had to use 1/2 drive stuff. Also had to remove the steering knuckle to get the big stuff on the bolt. The CBE went on perfectly and fit and finish is top notch. I also installed an R2C intake as well. Went for first real drive today and all I can say is that it sounds amazing. It is loud. I think it is louder inside the car than outside the car though. Not a bad thing. Nissan definitely needs to work on their sound deadening material. No rasp at all but there is definitely drone, especially at around 50 to 60 mph. Guess i will just have to go faster. The hiss is annoying but I can live with it. No hiss as long as your on the gas. I will be on the gas a lot. Great product Tony. Anyone thinking of purchasing this product it is well worth it.

love my FI set-up, as well...i've found, as far as the drone goes, once you reach your desired peak mph, back off just a bit, and the drone disappears...

your pipes haven't broken in yet, too...that took me about 200 miles on the way to vegas from tony's...noticeible reduction in "noise" (loudness) after that...

if by "hiss" do you mean the "rattle-snake-rattle"...?

it's not my place to say this, butt, youse guyz are lucky tony's still puttin' out da product for the z...i was told a few months ago that he was considering abandoning our cars exhaust system...juan hopes that's not true...it's a smokin' pipe...

happy merry, tone, and gang...

jaybulls · 12-19-2013, 07:33 PM

Quote:

Originally Posted by cooltoy

Thanks Tony. I am good with the normal logo.

plus, you can't hardly see the darn etching...which i think is kewl becoz tony wasn't a vain-e-ack having to extend the tips too far out from the bumper edge and saving our pants and legs from burning and preserving the aesthetics of the back end, at, i'm guessing, from free advertising...i think it's commendable...

Super Werty · 12-19-2013, 08:03 PM

So what you're saying is my exhaust just went up $120 in value

RafPR · 12-19-2013, 08:11 PM

Good news!!!!!! Santa will be on time!!!!! I just receive the tracking number of my FI CBE non-res + Resonated test pipes!!!!

THANKS TONY!!!!! GREAT LOGISTICS!!!!!

Zhoward93 · 12-19-2013, 09:07 PM

Tracking number received

cooltoy · 12-19-2013, 09:13 PM

Quote:

Originally Posted by jaybulls

plus, you can't hardly see the darn etching...which i think is kewl becoz tony wasn't a vain-e-ack having to extend the tips too far out from the bumper edge and saving our pants and legs from burning and preserving the aesthetics of the back end, at, i'm guessing, from free advertising...i think it's commendable...

I think with the Amuse rear I will see those tips stick out more.

NORAIN · 12-19-2013, 09:14 PM

Me 3!!! ...tracking number!

12-18-2013, 09:29 PM	#3167 (permalink)
jlw2546 Base Member Join Date: Aug 2013 Location: Maryland Posts: 157 Drives: 13 370Z GM M6 Rep Power: 12	Installed my non resonated hfc's and Carbon fiber CBE with 12 inch resonators on Monday and Tuesday. Yes, I took my time. Lol. Installation of the hfc's were a bit frustrating. Those bolts were a bitch to get loose. Had to use 1/2 drive stuff. Also had to remove the steering knuckle to get the big stuff on the bolt. The CBE went on perfectly and fit and finish is top notch. I also installed an R2C intake as well. Went for first real drive today and all I can say is that it sounds amazing. It is loud. I think it is louder inside the car than outside the car though. Not a bad thing. Nissan definitely needs to work on their sound deadening material. No rasp at all but there is definitely drone, especially at around 50 to 60 mph. Guess i will just have to go faster. The hiss is annoying but I can live with it. No hiss as long as your on the gas. I will be on the gas a lot. Great product Tony. Anyone thinking of purchasing this product it is well worth it. F.I. Inc. likes this. __________________ 18% tint - Swifts - SPL - H&R 20mm - F I Carbon Fiber TDX w/12in Res. - F I Hfc - R2C Short Ram Intake and a little Plasti Dip

12-19-2013, 03:27 AM	#3168 (permalink)
andy_meng1024 Premium Member Join Date: Nov 2009 Location: Taipei Posts: 233 Drives: 2012 370z Rep Power: 3381	Tony I'd like the old logo instead of letters as well for #871. I also PMd you about changing the spec. Thanks. Andy __________________ Current: 2015 C200 / 2018 Cayenne / 2012 370z / 2012 C250 Coupe Gone: 2013 Cayenne / 2004 Cayenne S / 2003 SL55 AMG / 2008 C300 / 2006 350z / 2006 C280 4Matic

12-19-2013, 08:03 PM	#3176 (permalink)
Super Werty Track Member Join Date: Jul 2013 Location: AZ Posts: 668 Drives: '13 Sport Rep Power: 13	So what you're saying is my exhaust just went up $120 in value __________________ The Build

12-19-2013, 08:11 PM	#3177 (permalink)
RafPR Base Member Join Date: Aug 2013 Location: Puerto Rico Posts: 86 Drives: '13 370Z GM SP M6 Rep Power: 12	Good news!!!!!! Santa will be on time!!!!! I just receive the tracking number of my FI CBE non-res + Resonated test pipes!!!! THANKS TONY!!!!! GREAT LOGISTICS!!!!! __________________ '13 370Z Gun Metallic Sport Package MT

12-19-2013, 09:07 PM	#3178 (permalink)
Zhoward93 Base Member Join Date: Jun 2013 Location: Waynesville OH Posts: 33 Drives: 09-370z-Red-7At Rep Power: 12	Tracking number received RafPR likes this.

12-19-2013, 04:33 PM	#3173 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,971 Drives: 14 PW 370Z S/T MT Rep Power: 243722	Thanks Tony. I am good with the normal logo.

12-19-2013, 09:14 PM	#3180 (permalink)
NORAIN Enthusiast Member Join Date: Jun 2013 Location: Wilmington, NC Age: 57 Posts: 323 Drives: 2011 370Z 6M SP Rep Power: 12	Me 3!!! ...tracking number! RafPR likes this. __________________ Swift Springs\|265-305 RE-11\|Forgestar F14\|F.I. TDX S.S. 12" Res."Milled Out"\|K&N\|SPL\|Z1(34 row)oil cooler\|Z1 brake upgrade\|Hotchkis Zspeed\|Team Voodoo\|HPDEjunkie.com

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fast Intentions exhaust is here!	F.I. Inc.	Intake/Exhaust	8307	06-09-2012 03:32 PM
Fast Intentions exhaust just ordered	Jmigs81	Intake/Exhaust	32	02-12-2012 04:39 PM
Fast Intentions Exhaust	Mark Gomez	Intake/Exhaust	13	05-19-2011 08:51 PM
ARK Exhaust vs. Fast Intentions	dnasty370z	Intake/Exhaust	61	09-06-2010 07:25 PM