Fast Intentions exhaust is here! (continued)

fxroar · 12-11-2012, 09:04 AM

Quote:

Originally Posted by reldas

is tony on these forums anymore? have been trying to contact him with no luck

Your best bet is to call Fast Intentions and ask for Tony. He's too busy making sure that each product come out on time

Fast Intentions: (805) 522-3278

PS

I ordered mine awhile back. I ordered it with the 18" resonators CF mufflers and added their 300 cell HFC. I'm right around 620ish and my installation time is January 5, 2013. Hang in there folks!

FPenvy · 12-11-2012, 09:14 AM

Quote:

Originally Posted by WPN370

I am number 654 cannot wait

So far my order is

Cbe with 18" res
Non res hfc
And some gen 3 intakes

My question is for all those that have heard them in real life what is your preferred combo with a hfc the 12 or 18 res or no res at at all ??????

so can't decide and YouTube doesn't help!

My car is daily driven for work so I need it to be a little tame when I want it to be, deff don't mind if its of its head when opened up though noise is not a concern then lol

i'm running full non res setup (CBE & TP) with CF cans and it's a monster when you get on the gas. but i DD mine to work as well and honestly when just cruising in between lights and in traffic it's still pretty tame. i mean there are times for fun i'll give it some loud pedal between lights and scare everyone around me. but thats just to pass the time in traffic

bdub561 · 12-11-2012, 09:45 AM

Quote:

Originally Posted by fxroar

Your best bet is to call Fast Intentions and ask for Tony. He's too busy making sure that each product come out on time

Fast Intentions: (805) 522-3278

PS

I ordered mine awhile back. I ordered it with the 18" resonators CF mufflers and added their 300 cell HFC. I'm right around 620ish and my installation time is January 5, 2013. Hang in there folks!

Im #621. I called Tony last week and he said it'll probably be shipped out by the end of this week.

bdub561 · 12-11-2012, 09:48 AM

Quote:

Originally Posted by WPN370

I am number 654 cannot wait

So far my order is

Cbe with 18" res
Non res hfc
And some gen 3 intakes

My question is for all those that have heard them in real life what is your preferred combo with a hfc the 12 or 18 res or no res at at all ??????

so can't decide and YouTube doesn't help!

My car is daily driven for work so I need it to be a little tame when I want it to be, deff don't mind if its of its head when opened up though noise is not a concern then lol

This has been answered quite a few times and I think it's mentioned on the F.I website.. The resonators are primarily there to reduce "drone" inside the cabin. Not for noise reduction outside the car.

fxroar · 12-11-2012, 01:51 PM

Quote:

Originally Posted by bdub561

Im #621. I called Tony last week and he said it'll probably be shipped out by the end of this week.

I would have mine shipped this week but I rather have them deal with the demon bolt

Congrats to you! Post some pics/vids after installation.

tonythetiger · 12-11-2012, 02:33 PM

im right behind ya, #622!!

bdub561 · 12-11-2012, 02:46 PM

Quote:

Originally Posted by fxroar

I would have mine shipped this week but I rather have them deal with the demon bolt

Congrats to you! Post some pics/vids after installation.

Haha. It really isn't as bad as people make it out to be.

FPenvy · 12-11-2012, 02:49 PM

Quote:

Originally Posted by bdub561

Haha. It really isn't as bad as people make it out to be.

i disagree. stock CBE came off in 5 min. cats took over 2 hours to get off. install of new TP and CBE took 10 min.

bdub561 · 12-11-2012, 02:52 PM

Quote:

Originally Posted by FPenvy

i disagree. stock CBE came off in 5 min. cats took over 2 hours to get off. install of new TP and CBE took 10 min.

If you go into it having all the necessary tools, it's a breeze. It was for me, at least. The demon bolts just snapped off as soon as I started twisting them.

FPenvy · 12-11-2012, 02:55 PM

Quote:

Originally Posted by bdub561

If you go into it having all the necessary tools, it's a breeze. It was for me, at least. The demon bolts just snapped off as soon as I started twisting them.

i was in a full garage/fab shop my buddy owns with any tool imaginable and it took 3 of us that long to get those 2 awful bolts to let go. i actually ended up slightly damaging the flange on my one of my cats because of it. damn you Nissan

Chemy · 12-11-2012, 03:27 PM

You guys have me worried. Just got #612 after a short delay and will try install here in just a few hours. I'm worried about the cats

FPenvy · 12-11-2012, 03:31 PM

Quote:

Originally Posted by Chemy

You guys have me worried. Just got #612 after a short delay and will try install here in just a few hours. I'm worried about the cats

everyones seemed to have been different. most seem to have little to no problems. i may have just been unlucky. it shouldnt worry you. the only hard part is the tighter space to get in there when removing the cats.

please dont let my horror story of bad luck with my cats scare you. just sharing my experience.

bdub561 · 12-11-2012, 03:51 PM

Quote:

Originally Posted by Chemy

You guys have me worried. Just got #612 after a short delay and will try install here in just a few hours. I'm worried about the cats

24" of extensions and a universal joint for a 1/2" drive and a breaker bar (jack stand handle) and you'll be okay. Oh, and some PB Blaster.

Mandingo · 12-11-2012, 04:00 PM

Quote:

Originally Posted by Chemy

You guys have me worried. Just got #612 after a short delay and will try install here in just a few hours. I'm worried about the cats

Use a penetrating oil like Kroil or Pblaster on all 6 of the bolts and let it sit for at least an hour.

I actually let the bolts soak overnight with a coating of Kroil. I think it definitely helped as I got both demon bolts off undamaged!

Chemy · 12-11-2012, 04:24 PM

I work at a Porsche dealership and one of the techs is going to help me

Never hurts!

12-11-2012, 02:33 PM	#1281 (permalink)
tonythetiger A True Z Fanatic Join Date: Oct 2010 Location: SA, TX Posts: 1,035 Drives: 10 Nissan 370z PG MT Rep Power: 193	im right behind ya, #622!! bdub561 likes this. __________________ KWV3/Eibach/StillenG3/FI CBE+LTH+34Row/Uprev/SPL/SouthBendSS/QuaifeLSD/4.08/TommyKaira/Status/VolkZE40/AP Radical BBK/Seibon/Amuse/VIS/Sparco/WorksBellGTC/RJM/Nismo

12-11-2012, 03:27 PM	#1286 (permalink)
Chemy Base Member Join Date: Aug 2012 Location: Atlanta, GA Posts: 109 Drives: Nismo 370Z, Pearl Rep Power: 13	You guys have me worried. Just got #612 after a short delay and will try install here in just a few hours. I'm worried about the cats __________________ 2012 Nismo, PW #512. FI CBE SS w/12" Res, Stillen g3's, UpRev, Kenwood 9990HD, Focal speakers and tweeters, Wicked Cas corner box with JL 10" w6, 35% ceramic tint, full clear bra.

12-11-2012, 04:24 PM	#1290 (permalink)
Chemy Base Member Join Date: Aug 2012 Location: Atlanta, GA Posts: 109 Drives: Nismo 370Z, Pearl Rep Power: 13	I work at a Porsche dealership and one of the techs is going to help me Never hurts! __________________ 2012 Nismo, PW #512. FI CBE SS w/12" Res, Stillen g3's, UpRev, Kenwood 9990HD, Focal speakers and tweeters, Wicked Cas corner box with JL 10" w6, 35% ceramic tint, full clear bra.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fast Intentions exhaust is here!	F.I. Inc.	Intake/Exhaust	8307	06-09-2012 03:32 PM
Fast Intentions exhaust just ordered	Jmigs81	Intake/Exhaust	32	02-12-2012 04:39 PM
Fast Intentions Exhaust	Mark Gomez	Intake/Exhaust	13	05-19-2011 08:51 PM
ARK Exhaust vs. Fast Intentions	dnasty370z	Intake/Exhaust	61	09-06-2010 07:25 PM